How to Add a Password to a .Bat File

Author Info

Last Updated: April 1, 2024

Adding a password protection to a windows .batch script isn’t incredibly difficult, but it would be hard to accomplish without any instructions. If you’re willing to take the time to learn then you'll have some password protection in no time.

Password Protecting a Batch File in Windows

To protect your .bat file with a password, you'll need to add a few lines to your code.
Type set/p "pass=>" on a new line in your batch file.
On the next line, type if NOT %pass%== passwordhere goto :FAIL, replacing "passwordhere" with the password you want to set.

Method 1

Method 1 of 2:

Writing Your Code

Download Article

You can open the Notepad application by going to Start, then All Programs, and then Accessories. In Accessories you’ll find Notepad. Windows users can just type "notepad", without quotes, into the start menu and hit enter. The application will open. ^{[1]
X
Research source}
2
Begin your code with @ echo off. This is the line that you will use to start your script. Scripting is writing the code that causes the program to run correctly. This line allows you to start writing text. ^{[2]
X
Research source} After you write that, you will copy the code below.
- :A
- if NOT %pass%== passwordhere goto :FAIL
Advertisement
3
Add the finishing touches to end your script. At the end of your program, you need to add the following lines:
- :FAIL
- echo Invalid password. If you want to write additional text you can. If you want to have time between the first line of text and the second line of text add a line that says 'ping localhost (number)'. This designates the amount of time between each line of text. Put it between the second and third line. If you want your program to run slowly and give people time to use each line of text, make the ping localhost time longer. The pause in between each line of text that shows up from the code would be the ping localhost time. If you want the program to say 'Hello' and then say 'how are you' five seconds later, you would write ping localhost 5
- goto :end
- :end

Method 2

Method 2 of 2:

Finishing Up

Download Article

You can choose whatever password you want. It can be as long as you want too. Just remember to keep the quotation marks. ^{[3]
X
Research source}
The default will be .txt, so you’ll have to change this. If you’ve already saved the file just go to file, then save as, and then change the extension to .bat. You might need to check the box saying ‘show extension’ if you don’t see .txt.
You can reach this tab from the Control Panel of your computer. Now go to Scheduled Tasks and navigate to the file that you just created. You can set it to run whenever you want it to – when someone tries to log on, when they try to open a certain file or folder, or any other prompt. ^{[4]
X
Research source}

Community Q&A

Search

Add New Question

Question

What if I did not add .bat at the end of codes?

Sunbakedcow

Community Answer

It would save as a .txt file.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 25 Helpful 23
Question

This is a nice idea. However, nothing prevents a user from editing the file and seeing the clear text password. What can be done to prevent that?

Community Answer

Hide the password .bat file. Attrib it +s +h. And then call it from another, single line .bat, file. That would make it a bit more difficult to edit.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 17
Question

OF the bat file is opened by using Notepad, it will show the code right?

Community Answer

Yes. This method only does the real batch code if the correct password is entered. Basically, this method only password protects running the program.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 7

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

If you are not sure how to create good .bat files see some of other articles to find out how to make some .bat programs

Thanks
Helpful 0 Not Helpful 0
This is a very basic password code. Anyone with knowledge of .bat files will still be able to access it.

Thanks
Helpful 0 Not Helpful 0