This article was co-authored by Matt Daly and by wikiHow staff writer, Hunter Rising. Matt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces. Matt also runs a blog where he educates homeowners about landscaping topics: https://www.liveinyourbackyard.com/. He earned his Landscape Design & Horticulture Certification from The University of Richmond, where he also studied Sustainable Landscape Practices.
There are 11 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 259,526 times.
If you want a unique way to divert water in your yard or make your landscaping look more interesting, adding in a berm is the perfect solution. You’ve probably seen these raised dirt mounds in other yards without even knowing it, and they’re so easy to put in by yourself. If you’re not sure why to include a berm in your yard, we’ve got everything you need to know. Keep reading to learn all about what berms are used for and how to build one in the span of an afternoon.
Things You Should Know
- Berms are raised mounds of soil that add visual variety to your yard and divert water runoff to improve drainage.
- Lay out your berm design in an area that’s 4 times as long as it is wide in your yard. Dig up the grass and topsoil so you have a flat dirt surface to start.
- Build your berm with a base of fill soil, a layer of clay soil as the next layer, and a final layer of topsoil. Then, add plants to your berm to prevent erosion.
Steps
Making a Landscape Berm
-
Find a spot for your berm where water drains away from your home. Since berms can redirect water and could cause puddling in low spots of your yard, you may need to fix the drainage problems before you build. When it’s raining, check where the water runs off or pools up in your yard. When you’re planning out your berm, either fill in a low spot to help water spread evenly across your yard or find a place where water won’t run back toward your home’s foundation.[2]
- If your yard has multiple spots where water pools, you may need to dig swales, which are channels at the bottom of your berm to collect water away from your home.
- If you’re making a rain garden, it’s okay to build a berm at the bottom of a downhill slope to direct water back toward your plants.
- If you’re not sure how the water drains on your property, contact a landscaping professional to assess your yard. Let them know that you want to build a berm so they can tell you the best spots to place them so stormwater still properly drains.
-
Lay out the shape of your berm with a garden hose. Take out a long garden hose and create the outline for your berm. As a guideline, keep the berm about 4–6 times as long as it is wide. Feel free to experiment with a few different shapes and positions to see what you like the most, but your berm will look best when it follows the natural curve or shape of your yard. Once you’re happy with the shape, spray paint the outline to mark it on your yard.[3]
- If your berm is 2 feet (61 cm) wide, then aim to make it about 8–12 feet (2.4–3.7 m) long.
- Many berms form straight lines along the edge of your property line, but they also look great when they’re shaped like a kidney bean in the corner of your yard.
-
Create a gradual 4:1 or 5:1 slope to height ratio. Taper your berm so it’s 4 or 5 times as wide as it is tall. That means if your berm is 1 foot (30 cm) tall, then the slope will taper out at least 4 feet (1.2 m). Keep your berm shorter than 24 inches (61 cm). This helps prevent your berm from eroding due to water runoff, plus it makes it easier to mow.[4]
- Try an asymmetric appearance for your berm to add more visual interest. Use a slope ratio of 3–5:1 on the back side of the berm and a gentler ratio of 5–7:1 on the inside.
- If you’re building your berm to hold water inside of a rain garden or around a tree, then it’s okay to use a 2:1 slope instead.[5]
-
Dig up the grass from the area. Use a shovel or spade to cut into the grass along the edges of your berm. Remove the grass to expose the topsoil underneath. Then, drag a rake across the newly exposed soil to rough up the surface and create a stronger bond with the next layer of soil for your berm.
- If the topsoil is uneven or bumpy, level the area so you have a flat starting surface.
- If you’re planning on laying sod, save the grass you just dug up so you’re able to use it again on the finished berm.
-
Build out the base of your berm with fill dirt or gravel. Use a shovel or wheelbarrow to pour in 3–4 in (7.6–10.2 cm) of fill dirt or landscaping gravel at a time. Spread the fill into the shape of your berm with a rake, leaving about 1 ft (30 cm) of space from the marked edges. Then, stomp on the fill or use a tamper to compact it.[6] Add more fill to the middle and use less as you get closer to the edges to create a gentle slope. Continue adding fill in layers until it’s just under half of the final height of your berm.[7]
- Fill dirt and gravel is usually cheaper than topsoil, so it helps you save money as you build out your berm.
- Soil could erode or wash through gravel if you don’t tamp it down, so make sure it’s compacted tightly before you move on.
-
Layer 2–3 in (5.1–7.6 cm) of clayey soil over gravel fill. Clayey soil doesn’t allow water to soak through it, so it helps prevent loose dirt from eroding from your berm. Pick some up from a landscaping store, and use a shovel to add the clayey soil over the dirt or gravel. Build up more soil at the peak of your berm and add less around the edges to maintain a gradual slope. Use your feet or a tamper to tightly compact the clay layer so water runs off down the slope without washing away any of the soil.[8]
- If you only used compacted fill dirt to build up your berm, you do not need a clayey soil layer. Fill soil doesn’t have as many gaps as gravel, so it won’t wash away as long as you compact it.
-
Add a 1 ft (30 cm) layer of topsoil to your berm. Spread out a layer of fresh topsoil over the entire berm, mixing it with the top 2–3 in (5.1–7.6 cm) of the clay or fill. Smooth out the top soil so the center of your berm is the tallest and makes a gradual slope that smoothly transitions into your yard.[9]
- If you dug up any topsoil when you started building your berm, shovel it back on top of the fill.
-
Compact the topsoil with your feet or a tamper. Stomp on the topsoil to pack it down against the berm and create a smooth surface. Alternatively, press down with a tamper until the topsoil is flat. The berm will naturally settle over time as water seeps through it, compacting it manually will help prevent even more erosion.[10]
- Create a flat top to help reduce runoff and provide more water to plants that you want to grow on your berm.
- Do your best to avoid compacting the soil along the edges of your berm so water can easily drain out. If it’s already compacted, loosen the soil by digging 8 inches (20 cm) deep to improve drainage.
-
Plant on your berm to prevent erosion. Choose a variety of native shrubs, trees, and flowering plants to add to your landscaping on your berm. Try putting the shorter plants on top of your berm so they’re more visible, and space them out in an irregular pattern so they look like natural growths rather than planted rows. Add as many plants as you want so the roots hold onto the soil and prevent your berm from eroding even more.
- If you don’t plant anything on your berm, then the soil could erode or wash away during a heavy rainstorm.
- Try adding ground cover plants, like lamb’s ear or creeping jenny, to the slopes of your berm to help catch water before it runs off.
-
Top your berm with mulch, garden rocks, or sod. After you put in all the plants that you want on your berm, apply mulch in a 2–3 in (5.1–7.6 cm) layer on top to retain moisture and prevent runoff. Alternatively, cover your berm in landscaping stones or put back the pieces of sod you removed earlier so the topsoil isn’t exposed. After you finish covering the ground, you’re finished building your berm![11]
Expert Q&A
-
QuestionWhere do you put berms in your yard?Matt DalyMatt Daly is a Landscape Designer and the Founder of Water & Earth Landscape Design, which is based in both Richmond, Virginia, and San Jose, California. With nearly 10 years of experience, he specializes in designing outdoor living spaces, including patios, pools, and fireplaces. Matt also runs a blog where he educates homeowners about landscaping topics: https://www.liveinyourbackyard.com/. He earned his Landscape Design & Horticulture Certification from The University of Richmond, where he also studied Sustainable Landscape Practices.
Landscape DesignerPut your berm in a place where it can channel the extra water away and guide it in the direction you want it to go. Just make sure that you inspect your yard while it's raining so you know what the water is actually doing—a lot of people troubleshoot their drainage problems after the fact, which isn't helpful. -
QuestionWhat is the maximum height for a berm?Community AnswerIt depends on however wide you can make its base. A good base is usually twice as wide as the berm's height. You may want to go wider if you plan on mowing the berm's grass and don't desire flipping the lawn tractor or struggling to keep the push-mower from sliding off its line.
-
QuestionCan I make a berm on top of small landscape rock?Community AnswerYou could, but it would wash off eventually, and would be almost impossible to mow. You probably couldn't grow much of anything on it, either.
Video
Tips
References
- ↑ https://gardeningcalendar.ca/garden-landscaping/10-tips-for-making-landscape-mounds-and-berms/
- ↑ https://www.hudson.oh.us/DocumentCenter/View/754/Raingarden-Brochure?bidId=
- ↑ https://youtu.be/wU8nMlLyVEY?t=55
- ↑ https://www.midwestgardentips.com/landscape-garden-design/create-a-berm
- ↑ https://apps.ecology.wa.gov/publications/publications/1310027.pdf
- ↑ https://apps.itd.idaho.gov/apps/env/BMP/PDF%20Files%20for%20BMP/Chapter%205/PC-5%20%20Dikes%20and%20Berms.pdf
- ↑ https://gardeningcalendar.ca/garden-landscaping/10-tips-for-making-landscape-mounds-and-berms/
- ↑ https://gardeningcalendar.ca/garden-landscaping/10-tips-for-making-landscape-mounds-and-berms/
- ↑ https://www.stormwaterpa.org/assets/media/BMP_manual/chapter_6/Chapter_6-4-10.pdf
- ↑ https://apps.ecology.wa.gov/publications/publications/1310027.pdf
- ↑ https://www.midwestgardentips.com/landscape-garden-design/create-a-berm
- ↑ https://www.midwestgardentips.com/landscape-garden-design/create-a-berm
- ↑ https://www.fhwa.dot.gov/Environment/noise/noise_barriers/design_construction/visql/visql05.cfm
- ↑ https://www.satinonline.org/Documents/149-architrail-technical-trail-features.pdf
About This Article
To build a berm for biking, start by removing all topsoil from the area, since topsoil will crumble and make the turn unstable. Then, cover the area with a 2 to 4 inch layer of dirt, and use a rake to compact it. You'll also need to incorporate a drain at the downhill end of the turn to allow water to run off. Next, build the berm up in 2 to 4 inch layers until the slope reaches your desired height. If the dirt doesn't stick together, rough up the surface to help the new layer of dirt stay in place. Finish by making the surface as smooth as possible, including by removing any stones or rocks. For tips on how to make a berm for your garden, keep reading!
Reader Success Stories
-
"I made my own for my motorbike. I haven't tested it yet, but I think it's good to go."