PDF download Download Article PDF download Download Article

Building a solid retaining wall using 4x4 treated posts is a straightforward project you can complete yourself with just some basic tools and supplies. In this article, we'll walk you through the best way to build the retaining wall step-by-step, from digging a trench to cutting and laying the posts. Follow the steps below, and before you know it, you'll have a beautiful, sturdy retaining wall made of treated posts.

Part 1
Part 1 of 3:

Laying the Foundation

PDF download Download Article
  1. Make the trench straight by staking out the location exactly and using a tight string to make a line between the stakes.[1]
  2. Compact the base material.
    • Check base material with a level or measure down from a leveled string line.
    • Add base material to low spots.
    • Repeat compacting.
    Advertisement
  3. Advertisement
Part 2
Part 2 of 3:

Building the First Course

PDF download Download Article
  1. The word “course” means one row or one layer of the materials of which the wall is made.
  2. Hammer rebar until flush with top of 4x4 post.
  3. Transcribe measurement onto a post. Mark line around the post with speed square and pencil, and cut the lines with circular saw.
  4. [2]
    • Add wooden shims if necessary.
  5. Advertisement
Part 3
Part 3 of 3:

Constructing the Wall

PDF download Download Article
    • Check posts for level and plumb before nailing.
    • Use the 4 pound sledge to hammer 60d wall tie nails through the top of the post into the course below.
    • Install the wall tie nails every 16 inches.
    • Install full length posts to complete the course cutting only the end post.
  1. Keep going until the layer is complete.
  2. Keep going until the layer is complete.
    • Dig a T shaped trench behind the wall.
    • Build the T-brace horizontally behind the wall with 4x4 posts.
    • Incorporate the base of the T-brace by nailing it flush in between two posts in a course of the wall.
    • Hammer rebar down through the T-brace into the ground.
    • Bury the T-braces.
    • Locate all T-braces below the top of the finished wall so as to not become disturbed or visible.
  3. [3]
  4. Advertisement

What Should I Know Before Building a Retaining Wall?


Community Q&A

Search
Add New Question
  • Question
    If I am building a wall in sand, do I need the rock base?
    Community Answer
    Community Answer
    Yes. Rock or concrete will make the wall much more stable and less likely to topple. The width and thickness of the base is dependent upon the height of the wall and how loose the sand at the base is.
  • Question
    What distance between posts for a 20" wooden retaining wall?
    Community Answer
    Community Answer
    You wouldn't want to span the posts any farther than 8 feet. Any farther apart and you run the risk of the retained material bowing out the wall. This is all dependent on several factors, such as hydraulic pressures behind wall, type of backfill material, thickness of retaining wall material, etc.
  • Question
    How high can I make this wall, and how do I know where to place the T-braces?
    Community Answer
    Community Answer
    I wouldn't go any higher than 8 feet. Depending on the shifting soil or sands, I wouldn't span any farther than 8 feet with the braces.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

Show More Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

Things You'll Need

Materials

  • 4”x4”x8' (or 12' length) treated post
  • ½” x 24” rebar
  • 6” 60d galvanized timber ties (nails)
  • wooden shims

Tools

  • Spade shovel
  • metal rake
  • 4ft level
  • measuring tape
  • pencil
  • 2 wooden stakes
  • roll of string
  • string level
  • 4 pound sledgehammer
  • circular saw
  • speed square
  • cordless drill
  • ½” auger bit
  • large pry bar
  • tamper

Expert Interview

Thanks for reading our article! If you'd like to learn more about building walls and ceilings, check out our in-depth interview with Oz Tzalalihin.

About This Article

Oz Tzalalihin
Co-authored by:
Landscaping and Hardscaping Expert
This article was co-authored by Oz Tzalalihin. Oz Tzalalihin is a Landscaping and Hardscaping Expert based in Calabasas, California. He runs Sundream Builders, where he manages quality control as their Project Coordinator. Sundream specializes in installing pools, and conducting hardscaping, landscaping & hillside design projects. Previously, Oz served as Project Manager for Vitoli Builders. He has a passion for working with sloped terrains and has shared his expertise through contributions to local publications. Oz holds a PMP (Project Management Professional) degree from Cornell University and specializes in building pools and structures on hillside properties. With his education and experience, he is a valuable asset and is dedicated to delivering quality results and smooth construction. This article has been viewed 243,739 times.
7 votes - 86%
Co-authors: 16
Updated: August 18, 2024
Views: 243,739
Categories: Walls and Ceilings
Article SummaryX

If you like do-it-yourself projects and want to make your property look more visually appealing, then build a strong retaining wall with 4 by 4 treated posts. To get started, you’ll need to dig a level trench and add sand or crushed limestone to it as a base leveling material. Once your trench is ready, you can prepare your posts by drilling holes through them so you can hammer rebar in to hold them in place. Do this every 4 feet for the entire length of your wall. Once your first layer is set, begin the second course by cutting the posts to half-length to stagger the joints. Then, begin the 3rd layer with ¼ length posts and the fourth layer with ¾ length posts to stagger seams. You can begin the fifth layer with full posts again. To add extra support, add a T-brace to the wall before the final layer. To learn how to lay the final course on the wall, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 243,739 times.

Reader Success Stories

  • D. Marvin

    D. Marvin

    Jul 20, 2017

    "It help tell me how deep I need to dig down, as well what type of base material to use. Some areas were vague. A..." more
    Rated this article:
Share your story

Did this article help you?

Advertisement