How to Bustle a Gown

Co-authored by Margo West

Last Updated: March 18, 2024 Fact Checked

Anyone who has ever gotten married can testify that weddings are incredibly expensive. Most couples look for ways to cut corners and save money, and one way you can do that is by bustling your gown yourself. Wedding dresses do not come with a pre-made bustle, but if you're handy with a needle and thread, you can learn to sew one on yourself.

Method 1

Method 1 of 3:

Adding a One-Point Overbustle

Download Article

1
Sew a loop. Place a safety pin on the back of the dress, halfway up the length of the bride's train. This is where the loop will go. Thread the needle by doubling up the thread and inserting it into the needle. Tie the end of the thread with a knot to secure it.^{[1]
X
Research source}
- Insert the needle into the underside of the dress. Pull the thread all the way through.
- Make a small stitch and pull the thread most the way through to create a loop.
- Grab the loop with your fingers and pull the remaining thread through the loop to create a knot.
- Repeat this process until you have a loop big enough to fit your button.
- Secure the loop by running the needle and thread through the loop to tie it off.
- Insert the needle through the fabric to the other side and make two knots. Cut off any excess thread.
2
Attach the button. Place a safety pin on the back of the dress, a foot above the bride's knees. This is where the button will go. Thread the needle and make a knot at the end of the thread. Thread the needle through the underside of the dress.^{[2]
X
Research source}
- Attach the button to the dress using the needle and thread.
- Stitch the button four times to make sure it is secure.
- Secure the button by running the needle and thread through the fabric to the other side. Make two knots and cut off any excess thread.
- If you prefer, you can also sew the button onto the waist of the dress and the loop onto the train.^{[3]
  X
  Expert Source
  
  Margo West
  Professional Tailor
  
  Expert Interview. 7 December 2020.}
Advertisement
3
Bustle the dress. Hook the loop over the button to lift the dress's train off of the floor. Rearrange the folds of fabric around the bustle to make the bustle appear bigger and to give it more volume.^{[4]
X
Research source}
- The one-point overbustle is the least expensive way to bustle a dress, but it's also the least secure.
- The one point overbustle is only recommended for dresses with lighter fabric.
- Do not try the over bustle if your dress is heavy or has a particularly long train.

Method 2

Method 2 of 3:

Adding a French Bustle

Download Article

1
Measure the seam. To add a French bustle, start by measuring the center back seam of the gown's train from the waist to the floor. Then measure the distance from the edge of the train to the base of the dress.^{[5]
X
Research source}
- Mark the place between these two distances with a pin.
2
Pin the waistline seam and train. Lift the center back seam where you made the pin mark and position it against the center of the waistline, at the base of the bodice. Adjust the fold so the train is between ½” to ¾” (1.3 – 2 cm) off the floor.^{[6]
X
Research source}
- Pin the train to the waistline seam.
- Lift the sides of the train off the floor ½” to ¾” (1.3 – 2 cm) and fold and pin the train along each side of the back seam.
- To lift the remaining train off the floor, continue to fold and pin the train as necessary between the seams.
3
Make the ties. Undo all the pin-marking points you have made on the train and waistline of the dress. Sew a length of narrow grosgrain ribbon measuring 15” (38 cm) to the waistline of the dress, using the pin marks as a guide.^{[7]
X
Research source}
- The ribbon should fall between the lining of the skirt and the dress's train.
- Make sure to sew the ribbon securely into the waistline seam.
4
Make the loops. Cut 2 1/2“ (6.5 cm) of the ribbon before folding it in half and stitching the ribbon loop to the underside of the dress's train. Make the loop stronger by reinforcing it with a small piece of interfacing, or by attaching the loop to the seam allowances of the dress.^{[8]
X
Research source}
- Loops should be attached ½” (1.3 cm) below each pin mark.
- Repeat the same process for all other loops.
5
Bustle the dress. Attach each ribbon to the corresponding loop by inserting the ribbon into the loop and tying a double bow. Plump up the fabric to make the bustle look bigger and to provide more volume.^{[9]
X
Research source}
- The French bustle is great for dresses with lots of train decoration centered below the waist because the bustle won't hide the designs.^{[10]
  X
  Research source}
- The French bustle is also ideal for dresses with long trains or that are made of heavier fabrics.

Method 3

Method 3 of 3:

Adding an American Bustle or Overbustle

Download Article

1
Measure the train. To add an overbustle, start by measuring the back seam of the dress's train from the waistline seam to the floor and again from the edge of the train to the base of the dress.^{[11]
X
Research source}
- Mark the place between these two distances with a pin.
2
Pin the waistline seam. Lift the center back seam where you made the pin mark and position it so it is flush against the center of the waistline, at the base of the bodice. Adjust the positioning so the train is ½” – ¾” (1.3 – 2 cm) off the floor.^{[12]
X
Research source}
- Attach the train to the seam using a pin.
3
Fold and pin the train. Lift the dress's train off the floor, and pin it so the sides of the train are positioned ½” to ¾” (1.3 – 2 cm) off the floor and secured to the sides of the dress's back seam.^{[13]
X
Research source}
- Fold and pin the train to lift any remaining train off the floor.
- If the train is too long or heavy, redistribute the already existing folds into two smaller folds.
- When the folds are securely pinned, release the bustle and remove the pins.
4
Attach the buttons or hooks. In order to secure the dress on the day of the wedding, the bustle will need to be connected to the dress using either buttons or hooks. Sew these on wherever you made pin marks along the waistline.^{[14]
X
Research source}
- Make sure to stitch securely – you don't want the bustle coming undone.
- If the buttons or hooks need additional reinforcement, attach a small piece of interfacing under each one.
5
Make the button loops. Use strong thread to thread the needle, then knot the ends of the thread together. Place a small piece of interfacing on the topside of the dress's train, wherever you made a pin marking denoting a button loop.^{[15]
X
Research source}
- Insert the needle at the pin, next to the seam-line, then pull it through the interfacing and train.
- Make a small backstitch from the right side of the train. Pull the thread to make a loop reaching 1” – 2” (2.5 – 5 cm).
- Place your fingers inside the loop and grasp the loop.
- Pull the thread to tighten the first loop and create a second loop. Repeat this until you have a thread loop that's big enough to fit the button or hook.
- Use several back stitches to secure the thread to the underside of the dress.
6
Bustle the dress. Once the loops have been added to the dress, bustle the train by fastening the loops to the buttons or hooks. Adjust the folds of fabric on the train to create a fuller and more voluminous bustle.^{[16]
X
Research source}
- If you don't like the look of the exposed buttons or hooks, you can hand-sew lace appliqués on top of the buttons or hooks to conceal them.
- Be sure to stock up on safety pins. American bustles are not as strong as French bustles and there's a chance that the bustle may break over the course of the evening.

Expert Q&A

Search

Add New Question

Question

Why would you put a bustle on a gown?

Margo West
Professional Tailor
Margo West is a Professional Tailor and the Owner of Margo West Bridal Alterations in Dallas, Texas. She is renowned for her expertise in bridal alterations, custom wedding gowns, wedding-related design, and pattern making. Her 44 years of bridal experience has earned her the prestigious WeddingWire Brides Choice Award, Couples Choice Award 2013-2019, and The Knot Best of Weddings 2018-2020. Margo was also featured in House of Diffa 2018 Jacket Collection and Modern Luxury Brides Magazine 2020. She will launch her new bridal gown collection for fall 2021.

Margo West

Professional Tailor

Expert Answer

If your wedding gown has a train, adding a simple American bustle will allow you to move freely after the wedding without worrying that guests will step on the train while you're greeting, dancing, or walking.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 0
Question

How do you make a bustle?

Margo West
Professional Tailor
Margo West is a Professional Tailor and the Owner of Margo West Bridal Alterations in Dallas, Texas. She is renowned for her expertise in bridal alterations, custom wedding gowns, wedding-related design, and pattern making. Her 44 years of bridal experience has earned her the prestigious WeddingWire Brides Choice Award, Couples Choice Award 2013-2019, and The Knot Best of Weddings 2018-2020. Margo was also featured in House of Diffa 2018 Jacket Collection and Modern Luxury Brides Magazine 2020. She will launch her new bridal gown collection for fall 2021.

Margo West

Professional Tailor

Expert Answer

With a partner, try on your gown and raise the train to the desired length from the floor. Pin the train into place. Add buttons to the waist, then sew strong thread in a chain stitch to the train portion of the stitch. Secure it with a knot underneath.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 1
Question

How do you bustle a small train on a fitted formal with a slit down the left leg. The dress will be worn in a presentation of senior girls followed by a dance.

Community Answer

The best bustle for this dress would be the one-point overbustle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 15

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If your Maid of Honor is concerned that they don't know how to bustle your dress, bring them to meet with a seamstress who can instruct them.

Thanks
Helpful 4 Not Helpful 0