PDF download Download Article PDF download Download Article

Carving pumpkins is such a fun Halloween tradition for all ages that lets you make some spooky decor to light up the night. Since it only takes 30–60 minutes to carve a pumpkin, it’s the perfect afternoon activity for you. Whether you're doing it for the first time or just need some new inspiration, we've got the best ways to carve a pumpkin right here! Keep reading to find out what you need to start carving your pumpkin and how to put it out on display when you're finished.

Part 1
Part 1 of 3:

Opening and Cleaning out the Pumpkin

PDF download Download Article
  1. Work on a clean, hard surface, such as a dining table or the kitchen floor. Put down a layer of newspapers or cut open a large garbage bag to unfold it into a large tarp to catch any spills or messes you make.[1]
  2. Watermark wikiHow to Carve a Pumpkin
    Cut a lid into the top of the pumpkin with a serrated knife. You can use a serrated knife from your kitchen or the largest serrated tool in a pumpkin carving kit. Draw a circle with about a 2 in (5.1 cm) radius from the stem with a washable marker. Tilt the blade at a 45-degree angle toward the stem and push it into the pumpkin. Saw along your outline with the knife until you can pull the lid off.[2]
    • Cutting at an angle prevents the lid from falling inside of your pumpkin.
    • Make sure your hand can easily fit inside the hole so you’re able to scoop out the seeds.
    • Try cutting a hole in the bottom of the pumpkin instead. That way, you can just set a candle or light on the cut-out base and put the pumpkin on top instead of reaching inside to light it.[3]
    Advertisement
  3. Watermark wikiHow to Carve a Pumpkin
    Start by pulling out as much of the pulp and seeds as you can by hand and put them in a large bowl. Then, scrape the inside walls of the pumpkin with any large stiff spoon, ice cream scoop, or scraper from a carving kit. Keep scooping out the pulp until the pumpkin is about 1–2 inches (2.5–5.1 cm) thick.[4]
    • Save and cook the pumpkin seeds for a tasty fall snack.
  4. Advertisement
Part 2
Part 2 of 3:

Designing and Carving Your Design

PDF download Download Article
  1. If you want to let loose and really get creative, let your imagination run wild and draw your design right onto the pumpkin skin. If you don’t like your design or want to make a change, just wipe the marker off with a damp paper towel and redraw it.[5]
    • Mark the sections you want to cut out with an X so you don’t accidentally carve out the wrong piece.
    • You could draw a spooky face with sharp teeth, the silhouette of a cat, or a scary ghost.
  2. Poke holes in the pumpkin with push pins to outline a stenciled design. If you have a printout stencil or a design that came with a carving kit, tack it onto the side of the pumpkin you want to carve with push pins or tape.[6] Use another push pin or a fork to poke holes every 18 in (0.32 cm) along the outline of the stencil to use as a reference for your design. When you take your stencil off, all you’ll have to do is connect the dots while you’re carving.[7]
    • A pumpkin carving kit usually comes with a sharp tool you can use to poke holes.
    • Sprinkle a little baby powder onto your pumpkin and rub it into the holes so they’re easier to see.
  3. Watermark wikiHow to Carve a Pumpkin
    Start carving your pumpkin near the center of your design and work toward the edges. Push the knife straight into the pumpkin along the outline of your design. Use an up-and-down sawing or rocking motion to cut through the skin. Start by making rough cuts to remove large sections and go back to clean up the edges.[8]
    • Always cut away from your body so you don’t hurt yourself if your knife slips.
    • If you’re working on a small or intricate design, switch to a paring knife instead.
    • You can throw away the pieces of pumpkin you cut out or feature them in your design. You could attach them with toothpicks to make ears or horns.
    • If you’re carving names or letters that have cutouts like an “O” or “A,” cut the piece out and reattach it to the pumpkin with a toothpick.
  4. Make simple shape cutouts with cookie cutters and a rubber mallet. If you want to add some striking designs to your pumpkin, hold a cookie cutter against your pumpkin. Tap the cookie cutter gently with a rubber mallet to push it through the pumpkin’s skin. Once it’s all the way through, just pull the cookie cutter out and the section of pumpkin will come out with it.[9]
    • Use cookie cutters with spooky shapes, like ghosts, bats, or moons.
  5. Draw a few clusters of dots on your pumpkin with your marker to make a pattern or group of stars in your design. Use a drill to bore holes through the pumpkin skin. Change to larger and smaller drill bits to add a variety of dots to your pumpkin.[10]
    • You could also use a drill to easily cut out eyes if you’re carving a face in your pumpkin.
  6. Watermark wikiHow to Carve a Pumpkin
    Rub petroleum jelly around the cut edges of the pumpkin. Since the cut edges of the pumpkin are exposed to the air, they could rot or develop mold quicker. Pat the cut edges dry with a paper towel before rubbing a thin layer of petroleum jelly over the exposed skin.[11]
    • Petroleum jelly makes a thin protective layer that keeps mold and bacteria out.
  7. Advertisement
Part 3
Part 3 of 3:

Lighting and Displaying Carved Pumpkins

PDF download Download Article
  1. Watermark wikiHow to Carve a Pumpkin
    Put tea lights inside your pumpkin. Light one or two small tea lights and set them on the bottom of your pumpkin. Put the lid back on your pumpkin to light up your design so it’s visible. Just make sure to blow the tea lights out at the end of the night so they don’t stay lit or cause a fire.[12]
    • Candles will stay lit better if you cut or drill a small vent hole at the top of the pumpkin.
  2. Use an LED light for a fire-safe alternative. Look for a battery-operated LED light that fits inside your pumpkin and switch it on. You can leave the light on overnight without any risks, so they’re great if you want to keep your pumpkin lit up when it gets late.[13]
  3. Set your carved pumpkin outside on a patio or table to add some Halloween spirit to your home. Find a spot where it won’t easily fall or get knocked over so your pumpkin stays safe.[14]
    • If you’re using tealights, avoid putting your pumpkin near anything flammable.
    • Put your pumpkin in a garbage bag in the fridge if temperatures dip below freezing or go above 70 °F (21 °C) to slow down rot.
  4. When you notice your pumpkin starting to dry out, fill a sink with cold water. Submerge the pumpkin for a few hours or overnight to help rehydrate it. Pull the pumpkin out and thoroughly pat it dry with paper towels before putting it back out again.[15]
    • If you don’t dry your pumpkin, it may develop mold faster.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Is there a specific knife you can use to make your carvings have more bends and curves in the design?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    A small paring knife or a craft knife may make it easier to work on small, intricate details.
  • Question
    What is the best knife to use?
    Community Answer
    Community Answer
    You can use a pumpkin carving kit or a small, serrated kitchen knife.
  • Question
    Can I cut a pumpkin without a serrated knife?
    Community Answer
    Community Answer
    Yes, a serrated knife simply makes the task easier.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Reader Videos

Submit a Video Tip!

Share a quick video tip and help bring articles to life with your friendly advice. Your insights could make a real difference and help millions of people!

Submit a Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

  • If you’re carving pumpkins with young kids, don’t let them use any sharp knives. Let them help design the pumpkin but carve it out for them.
Advertisement

About This Article

Amy Guerrero
Co-authored by:
Arts & Crafts Specialist
This article was co-authored by Amy Guerrero and by wikiHow staff writer, Hunter Rising. Amy Guerrero is an Arts and Crafts Specialist and the Owner of Sunshine Craft Co., a crafting studio based in Phoenix, Arizona. Amy specializes in macrame, DIY crafting, and teaching fiber arts. She offers monthly in-person and online workshops along with having developed a range of DIY craft kits for at-home projects. Amy holds a BS in Industrial Design from Philadelphia University. She worked as a graphic designer before starting her own business. Sunshine Craft Co. is a creative hub that offers a wide range of workshops, tools, and resources for any craft project to inspire creativity and community engagement. This article has been viewed 2,075,483 times.
26 votes - 92%
Co-authors: 178
Updated: October 24, 2024
Views: 2,075,483
Article SummaryX

To carve a pumpkin, first draw your design on the flattest face of the pumpkin using a pen or marker. You can draw your design freehand or use a template you found online. Place your pumpkin on some newspaper or a towel to make cleanup easier. Then, use a serrated bread or paring knife to cut around the stem of the pumpkin and remove the top. Scoop out all of the seeds and filling inside of the pumpkin with a large spoon. Then, scrape the inside of the pumpkin with your spoon to remove any soft tissue and prevent rotting. Now, cut out your design with the knife using an up and down motion along each line you drew. Finally, set a candle or light inside of your carved pumpkin and put the top back on. For design suggestions and tips, scroll down!

Did this summary help you?

Thanks to all authors for creating a page that has been read 2,075,483 times.

Reader Success Stories

  • Ronrobint

    Ronrobint

    Oct 10, 2022

    "I learned at least 3 helpful hints from this article. It's a must read for any and all to read. No matter if..." more
    Rated this article:
Share your story

Did this article help you?

Advertisement