Cathode vs Anode: What’s the Difference?

Download Article

How cathodes and anodes interact inside of a battery

Co-authored by Richard Taylor and Hannah Madden

Last Updated: July 18, 2023 Fact Checked

Download Article

Cathode Definition

|

Cathode Properties

|

Anode Definition

|

Anode Properties

|

How Cathodes and Anodes Interact

|

Cathodes and Anodes in Batteries

|

Expert Interview

You’re putting new AA batteries inside of your remote, when all of the sudden, you stop and think, “How do these work?” Whether you’re just curious about how batteries are made or you’re studying for a chemistry quiz, cathodes and anodes are important concepts that anyone can learn. To understand the differences between them as well as how they interact, read on!

Things You Should Know

Cathodes are positive electrodes that receive electrons.
Anodes are negative electrodes that release electrons.
Inside of a battery, anodes and cathodes are connected by a metal conductor to pass electrons.

Section 1 of 6:

Cathode Definition

Download Article

Also called an oxidizing electron, a cathode acquires electrons from an electrochemical reaction (usually inside of a battery). The cathode receives electrons from the anode.^{[1]
X
Research source}

Section 2 of 6:

Cathode Properties

Download Article

Typically, this is a metal like copper oxide, graphic oxide, or lithium oxide. In batteries, cathodes have to be stable when in contact with electrolytes, since that’s what aids in the electrochemical reaction.^{[2]
X
Research source}

Section 3 of 6:

Anode Definition

Download Article

An anode is the negative electrode that releases electrons. Also called the reducing electrode, an anode oxidizes during an electrochemical reaction. As it oxidizes, it releases the electrons that the cathode then acquires.^{[3]
X
Research source}
- If you’re working on a water heater, you may have heard the term “sacrificial anode.” The sacrificial anode is a metal rod that sits inside of your water heater. It attracts particles (like iron or limestone) and corrodes over time, helping the water heater tank itself avoid corrosion.

Section 4 of 6:

Anode Properties

Download Article

Typically, they’ll be made of lithium, zinc, graphite, or platinum. Anodes must have good conductivity so that they can release their electrodes and pass them to the cathode.^{[4]
X
Research source}

Section 5 of 6:

How Cathodes and Anodes Interact

Download Article

A metal conductor connects cathodes and anodes inside a battery. The conductor is typically a metal wire or metal tube that runs from the cathode to the anode. If the battery has a charge, the anode releases electrons that then run along the conductor and into the cathode. The cathode then acquires those electrons.^{[5]
X
Research source}
- Once the anode erodes completely (meaning it releases all of its electrons), the battery will die or lose charge.
- This conductor is also sometimes referred to as an “electrolyte.” While electrolytes usually refer to a liquid conductor, inside of batteries, the electrolyte is a solid conductor.

Section 6 of 6:

Cathodes and Anodes in Batteries

Download Article

Take a look at a battery, any kind. You’ll notice a small plus sign, or positive sign, on one side. This is where the cathode is: since it’s a positive electrode, it’s always indicated by the positive sign.^{[6]
X
Research source}
2
An anode is indicated by a negative - sign. Now, check out the other side of the battery, and look for the small negative, or minus sign. This is the anode. Since it’s a negative electrode, it’s indicated by the negative sign.^{[7]
X
Research source}
- It’s important to know where cathodes and anodes are, especially if you’re jump-starting a battery (like in a car). Attaching the jumper cables to the cathode and anode connections in the right order is crucial for a clean charge.
- You can also find cathodes and anodes in other utilities, like water heaters and fluid tanks.