How to Change Computer BIOS Settings on a Windows PC: Guide

Download Article

A user-friendly guide to accessing and configuring the computer BIOS

Written by Rain Kengly

Last Updated: October 17, 2024 Fact Checked

Download Article

Entering the BIOS on Startup

|

Entering the BIOS with Settings

|

Adjusting BIOS Settings

|

Video

|

Q&A

|

Tips

|

Warnings

Do you need to change or set up your computer's BIOS settings? The BIOS (Basic Input/Output System) boots up your computer and manages the data flow between the operating system (OS) and attached devices. Since the BIOS is tied to a computer's motherboard, the appearance of each computer's BIOS will vary slightly depending on the manufacturer. You should only configure the BIOS settings if you're absolutely certain about the changes. This wikiHow will show you how to access and modify the BIOS page for your Windows 8, 10, or 11 computer.

Changing Computer BIOS Settings

The most common way to access the BIOS settings is to press a specific key at startup. The key varies depending on what kind of computer you have, but it's typically F2, F10, Del, or Esc. You'll usually see it displayed during the power-on self-test (POST).

Part 1

Part 1 of 3:

Entering the BIOS on Startup

Download Article

1
Turn on your computer. You'll only be able to access the BIOS upon startup.^{[1]
X
Research source}
- If your computer is already on, you'll need to restart your computer.
2
Press Del or F2 to enter setup. You can press and hold or repeatedly press this button. The setup button is usually Del or F2, but this could vary depending on your device.
- Here's a list of some of the most common setup keys by manufacturer:
  - Acer: F2 or DEL
  - ASUS: F2 or Del
  - Dell: F2 or F12
  - HP: ESC or F10
  - Lenovo: F2 or Fn + F2
  - Lenovo Desktops: F1
  - Lenovo ThinkPads: Enter + F1.
  - MSI: DEL for motherboards and PCs
  - Microsoft Surface Tablets: Press and hold the volume-up button.
  - Origin PC: F2
  - Samsung: F2
  - Sony: F1, F2, or F3
  - Toshiba: F2
- It's best to start pressing the setup key as soon as the computer begins to restart.
- If you see "Press [key] to enter setup" or something similar flash across the bottom of the screen and then disappear, you'll need to restart your computer and try again.
- Look at your computer model's manual or online support page to confirm your computer's BIOS key.
Advertisement
3
Wait for your BIOS to load. After successfully hitting the setup key, the BIOS will load. This should only take a few moments. When the loading is complete, you will be taken to the BIOS settings menu.
- You can now update your computer's BIOS.
- This is the quickest way to enter the BIOS, but you can also access the BIOS through the Windows Settings.

Part 2

Part 2 of 3:

Entering the BIOS with Settings

Download Article

1
Open Settings on your computer. Click the Start menu, then click the cog icon to open Settings.
- Use this method to enter the BIOS from your Windows Settings rather than a setup key.
This will be towards the bottom of the screen.
This is in the left panel, underneath Troubleshoot.
4
Click Restart now. This will be underneath the Advanced startup header.
- Your computer will restart, then load a special menu.
Within the Troubleshoot window, select Advanced Options, then UEFI Firmware Settings.
Your computer will restart and enter the BIOS.

Part 3

Part 3 of 3:

Adjusting BIOS Settings

Download Article

Since BIOS menus don't support mouse input, you'll need to use the arrow keys and other computer-specific keys to navigate the BIOS. You can usually find a list of controls in the bottom-right corner of the BIOS homepage.
2
Change your settings carefully. When adjusting settings in your BIOS, be sure that you certain what the settings will affect. Changing settings incorrectly can lead to system or hardware failure.
- If you don't know what you want to change coming into the BIOS, you probably shouldn't change anything.
3
Change the boot order. If you want to change what device to boot from, enter the Boot menu. From here, you can designate which device the computer will attempt to boot from first. This is useful for booting from a disc or flash drive to install or repair an operating system.
- You'll typically use the arrow keys to go over to the Boot tab to start this process.
4
Create a BIOS password. You can create a password that will lock the computer from booting unless the correct password is entered.
- You can always reset your BIOS password later.
Your BIOS’s clock will dictate your Windows clock. If you replace your computer's battery, your BIOS clock will most likely be reset.
These options are for advanced users only. In this menu, you can overclock your CPU, potentially allowing for higher performance. This should be performed only if you are comfortable with your computer’s hardware.
7
Save and exit. When you are finished adjusting your settings, you will need to save and exit by using your BIOS' "Save and Exit" key in order for your changes to take effect. When you save and restart, your computer will reboot with the new settings.
- Check the BIOS key legend to see which key is the "Save and Exit" key.

Community Q&A

Search

Add New Question

Question

I cannot change my BIOS settings. I can still access it, but it's all grayed out. I can only change the date and time. What can I do to fix this?

TFG

Community Answer

If all your BIOS items are grayed out (but you can still access it), you probably have the administrator (or setup) password set. To unlock your BIOS, go to the Security tab , find the "Unlock Setup" (or similar) row and type your password into the box. Note that if you enter the password wrong 3 times, you will have to restart your computer, enter the BIOS and then try again.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 23 Helpful 21
Question

How can I bypass the BIOS setup screen so that my PC will start up more quickly?

Community Answer

You simply cannot. Starting BIOS is a vital part of the start up process of your computer, so you can't skip it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 17 Helpful 27
Question

How do I access BIOS in Windows 8.1?

Community Answer

The BIOS depends on your computer's hardware. Try doing a Google search for how to access the BIOS for your computer.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 19

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Your computer's BIOS settings may be significantly more limited than another computer's BIOS settings.

Thanks
Helpful 0 Not Helpful 0
Windows 8, 10, and 11 computers tend to have motherboards that make accessing the BIOS incredibly difficult. You'll likely have to restart and try again several times before you reach the BIOS.

Thanks
Helpful 0 Not Helpful 0
A useful task is to check the boot order. If you have the OS on the hard drive, make sure that the hard drive is the first in the boot order. This can save a few seconds off boot time.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Don't change any settings that you aren't sure about.

Thanks
Helpful 0 Not Helpful 0
If you are going to flash the BIOS after, do not attempt this. If you have already changed settings, you must reset your BIOS.

Thanks
Helpful 0 Not Helpful 0