3 Ways to Remove Oil From a Hardwood Floor

Download Article

Banish oil stains with this floor cleaning guide

Written by Jon Gholian | Edited by Carmine Shannon

Last Updated: January 4, 2024 Fact Checked

Download Article

Fresh Oil Spills

|

Older Oil Spills

|

Extra Stubborn Stains

|

Expert Q&A

|

Tips

|

Warnings

|

Things You'll Need

If you spilled oil on your wood floor, you've come to the right place. We're here to explain how to use household products to sop up the mess before it soaks into the wood. We can help even if the oil was absorbed and the stain has set in. Read on to learn three different ways to get oil out of a wood floor using baking soda, dish soap, mineral spirits, TSP, or Fuller’s earth.

This article is based on an interview with our cleaning specialist, Jon Gholian, founder of Cleany. Check out the full interview here.

Things You Should Know

Spread kitty litter or baking soda over the spill ASAP and vacuum it up after at least 30 minutes.
Froth dish detergent and water in a bowl to make soap suds, then rub just the suds into the stain with a soft cloth.
Wipe off the suds and excess oil with a soft, damp cloth, then dry it completely.

Method 1

Method 1 of 3:

Cleaning a Fresh Spill

Download Article

The faster you deal with a spill, the better your chances of getting out the stain.^{[1]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 3 December 2020.} Use a newspaper or soft, absorbent cloth to dab up all the excess oil. Don’t rub, or you could work the oil further into the wood.
2
Cover the stain with kitty litter for 30 minutes, then vacuum it up. Next, cover the stain in an inch (2.54 cm) of absorbent powder, like baking soda, kitty litter, or talcum powder. Let it sit for at least 30 minutes or up to overnight, then vacuum it all up.
- Wear gloves to prevent skin irritation.
Advertisement
3
Mix dish soap and water in a bowl. Pour dish detergent into the bottom of a bowl, then fill it with water. Use regular dishwashing detergent or a similar cleaner designed to cut through oil.^{[2]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 19 April 2021} Mix up the water with your hands to create soap suds.
- You can also use a pH neutral cleaning agent, like OdoBan, just as long as it's diluted with water.^{[3]
  X
  Expert Source
  
  Ashley Matuska
  Professional Cleaner
  
  Expert Interview. 15 April 2019.}
- Some people swear by spraying your floor down with a vinegar solution, but using an acidic cleaner on hardwood can damage the finish, so we don't recommend it.
Scoop the suds, and not the water, out of the bowl and pour them on the stain. Use a soft cloth or brush to gently work the suds into the wood grain to break down the grease.^{[4]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 3 December 2020.}
Dip a cloth in cold water, then wring it out. Water can stain wood, so get out as much as you can. Clean up the suds and oil entirely. ^{[5]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 3 December 2020.}
6
Dry the area with a soft dry cloth. Once the suds are removed, dry the wood gently and thoroughly. Allow the area where the spill was to air dry completely. If possible, open a window or use a fan to speed up the drying process.^{[6]
X
Research source}
- If the grain of the wood is raised after the floor is completely dry, smooth it with fine sandpaper.^{[7]
  X
  Expert Source
  
  Jon Gholian
  Cleaning Specialist
  
  Expert Interview. 3 December 2020.} If you have a wax-finished floor, gently rub wax over the area with a soft cloth. If you have a surface finish, spread a polyurethane varnish on the floor to refinish it.

Method 2

Method 2 of 3:

Cleaning Older Spills with TSP or Mineral Spirits

Download Article

1
Use TSP on wax-finished floors, and mineral spirits on surface finishes. Scratch a hidden part of your floor with a sharp knife to determine the finish. If clear material flakes up, that’s a wax finish. If no wax beads up, it’s surface finished. If you have a surface-finished floor, use odorless mineral spirits. If it’s wax finished, get trisodium phosphate (TSP).^{[8]
X
Research source}
- Surface-finished floors have a urethane coating that keeps water from sinking into them. They require a different kind of care than wax-treated floors, because the urethane just sits on top while the wax actually penetrates the wood.
- If you’re using TSP, mix 1 tablespoon (.17 g) into 32 fluid ounces (950 mL) of water to make a cleaning solution. Use a glass bowl and a wooden stirrer to keep the TSP from reacting with metal.
Open a window or use an electric fan to provide airflow through the room, since the fumes from these cleaners are harmful. Put on rubber gloves and a respirator if you’re using mineral spirits, and put on goggles as well if you’re using TSP. ^{[9]
X
Research source}
3
Saturate the stain in the cleaning product. Pour some mineral spirits onto an absorbent cloth, then place it on the stain. After a few minutes, wipe the mineral spirits away and wash the wood with water before completely drying it off.^{[10]
X
Research source}
- If you’re using TSP, dip a sponge in the mixture and rub down the area with the stain. Dip another sponge in warm water, squeeze it out, and rinse all of the TSP solution off of the floor.^{[11]
  X
  Research source}
- If the stain persists, repeat this step.
If possible, use a fan or open a window to aid the drying process.^{[12]
X
Research source} Wait until the area is completely dry before proceeding to the next step.
Squirt a small amount of wax polish onto the affected area and rub it into the wood in a circular motion using a soft cloth.^{[13]
X
Research source} If you have a surface-finished floor, apply a coat of polyurethane and let it dry.

Method 3

Method 3 of 3:

Cleaning Stubborn Stains with Fuller’s Earth

Download Article

1
Wipe the floor with acetone. If you have an especially tough stain on a wax-finished floor, use Fuller’s earth to remove it. Wet a rag with a little acetone, then wipe down the area with it.^{[14]
X
Research source}
- Fuller’s earth is an absorbent powder that mechanics use to clean grease stains off their garage floors. It’s made from the same stuff as kitty litter, but since it’s such a fine powder, it can more easily come in contact with the entire stain.
2
Cover the area with a paste of Fuller’s earth and acetone. Mix a little bit of acetone into Fuller’s earth until it makes a thick paste. Spread the paste on the stain, then let it dry until it turns back into a powder.^{[15]
X
Research source}
- Make the consistency of the Fuller’s earth between wet sand and clay.
3
Clear off the Fuller’s earth with a brush or palette knife. Use a clean cloth or a stiff bristled brush to break up the Fuller’s earth, then sweep it up. If it feels stuck, use a palette knife to ease the dried paste off of the floor. Keep repeating this process until the stain is completely gone.^{[16]
X
Research source}
- Take care not to scratch the floor if you’re using a pallet knife.
4
Clean the floor with pH-neutral detergent. Mop the floor using a pH-neutral cleaner for wood floors. This will get rid of any Fuller’s earth residue. Change your mop head as it gets dirty to ensure you’re still picking up residue and not just spreading it around.^{[17]
X
Expert Source

Ashley Matuska
Professional Cleaner

Expert Interview. 15 April 2019.}
- Flathead mops are great for this because you can easily switch out their heads.^{[18]
  X
  Expert Source
  
  Ashley Matuska
  Professional Cleaner
  
  Expert Interview. 15 April 2019.}
If you can still see oil in the wood grain, carefully sand down the area with fine-grit sandpaper.^{[19]
X
Expert Source

Jon Gholian
Cleaning Specialist

Expert Interview. 3 December 2020.} When you’re done, rub a little bit of wax on the area in a circular motion, until the wood soaks it all up.

Expert Q&A

Search

Add New Question

Question

How do you clean oily residue off a hardwood floor?

Jon Gholian
Cleaning Specialist
Jon Gholian is a Cleaning Specialist and the Founder of Cleany, a home and office cleaning concierge service based in New York City, New Jersey & Miami. Cleany specializes in providing quality cleaning and handyman services to all their customers. All Cleany employees are insured, bonded, and professionally trained. Cleany has been featured in the New York Times, Bravo & Redfin.

Jon Gholian

Cleaning Specialist

Expert Answer

If something oily spills onto your wooden floor or furniture, spring into action straight away. Gently rub the area with a soft cloth and dish detergent to break down the grease. Then, rinse with cold water. If one application doesn't work, repeat the procedure—be sure to keep children and pets out of the room until you're done. Let the spot dry, then smooth the raised grain with fine sandpaper.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Things You’ll Need

Cleaning Fresh Spills

Kitty litter, baking soda, or talcum powder
Soft cloths or rags
Vacuum
Dish detergent
pH neutral floor cleaner (optional)
Large bowl
Fine grit sandpaper (optional)
Wax (optional)
Polyurethane varnish (optional)

Cleaning Oil Spills with TSP or Mineral Spirits

Rubber gloves
Respirator
Goggles
TSP
Odorless mineral spirits
Large glass bowl
Wooden spoon
Sponges
Wax or polyurethane varnish

Cleaning Stubborn Stains With Fuller’s Earth

Tips

Keep children and pets away from the room where you are working. They may step in and spread the oil, or be harmed by fumes or cleaning products.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Ensure that the room is well-ventilated when using powerful cleaning products.

Thanks
Helpful 1 Not Helpful 0
Use rubber gloves to prevent skin damage or irritation, especially when using powerful cleaning products like mineral spirits and TSP.

Thanks
Helpful 0 Not Helpful 0
If your wood flooring is new, using a DIY solution may void the warranty. In these cases, it may be best to seek professional help with older or stubborn stains.^{[20]
X
Research source}

Thanks
Helpful 0 Not Helpful 0