PDF download Download Article PDF download Download Article

This wikiHow teaches you how to enable your router's Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns a device-specific IP address to each device on your router's network, which ensures that no two devices will share an IP address and thus encounter connection errors.

Part 1
Part 1 of 2:

Get the Router Address

PDF download Download Article

Windows

  1. Make sure your computer is connected to the Internet. If your computer isn't connected to the Internet, you won't be able to view your router's address.
  2. Advertisement
  3. It's near the bottom of the page. You may have to scroll down in order to see this option.
  4. This is the router's address; you'll use it to access the router's page, from which point you'll be able to change your DHCP settings.[4]
  5. Advertisement

Mac

  1. Make sure your computer is connected to the Internet. If your computer isn't connected to the Internet, you won't be able to view your router's address.
  2. It's near the top of the Apple drop-down menu.
  3. This globe-shaped icon is on the System Preferences page.[6]
  4. It's in the middle of the page.
  5. This option is near the top of the Advanced window.
  6. number. This is the router's address; you'll use it to access the router's page, from which point you'll be able to change your DHCP settings.[7]
  7. Advertisement


Part 2
Part 2 of 2:

Enable DHCP

PDF download Download Article
  1. Doing so will take you to your router's page.[8]
  2. Some routers are protected by a username and password. If you didn't set the password, you can usually find it in your router's manual.[9]
    • You can also look up your router's model number and name online to see if you can find the default username and password.
    • If you set a password but no longer remember it, reset your router to restore the factory settings.
  3. Each router's page will differ slightly from other routers; you'll likely find the router's settings.
  4. This will usually be in the "Network Settings" section (or your router page's equivalent). If you can't find DHCP there, look for it in the "Advanced" settings, "Setup" settings, or "Local Network" settings.
  5. Click the Enable switch, checkbox, or button. In some cases, you may first have to click a Disabled drop-down box and then select Enabled from the drop-down menu.
    • You may also have the option to change the number of devices that can use your router. Be careful if you do this, since allowing for too few devices will result in connection errors for one or more devices.
  6. Click the Save or Apply button to save your settings. Depending on your router, you may also be prompted to restart your router in order for the changes to take place.
  7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can an iPhone be removed from a router without access to the actual device?
    Community Answer
    Community Answer
    Yes. Simply prevent the iPhone's Mac address or IP address from connecting to the router in the access control of your router settings.
  • Question
    How long does it take to reboot a router?
    R2_d2000
    R2_d2000
    Top Answerer
    It should take 1-2 minutes for a router to reboot. It could take up to 5 minutes though, so don't be concerned if it takes too long.
  • Question
    I tried using admin and password to log into my router, but it won't let me in. It asks for city I was born in and father's middle name. I input the info, and it says that the info is not correct! What should I do?
    R2_d2000
    R2_d2000
    Top Answerer
    I sounds like someone else set up your router, but didn't give you the information. You will have to reset your router back to factory settings. There should be a reset button on the back of the router. You can push it with a paperclip, and hold it down for about 30 seconds. This should reset the router.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

  • Your best course of action is to follow your router's specific guide to changing its settings, since all routers differ from one another.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

You Might Also Like

Enable IP RoutingEnable IP Routing
Make a Network CableMake a Network Cable
Find the MAC Address of Your ComputerFind the MAC Address of Your Computer
Check if a Port is Open: 5 Quick Ways
Set Up Port Forwarding on a Router Forward a Port on Any Router: Easy Guide
Connect Two ComputersConnect Two Computers: Microsoft Windows & Mac OS X
Flush DNS Flush DNS (Clear the Cache) in All Major Operating Systems
Change a Computer's Mac Address in Windows3 Ways to Change a Computer's Mac Address in Windows
Get a MAC Address from an IP RemotelyGet a MAC Address from an IP Remotely
Create a Local Area Network (LAN)Create a Local Area Network (LAN)
Join a Computer to a Domain Join a Domain on a Windows Computer or Mac
Configure Your PC to a Local Area NetworkEasy Ways to Set Up and Connect to a Local Area Network (LAN)
Connect One Router to Another to Expand a NetworkConnect One Router to Another to Expand a Network
Set up a Network Drive Set up a Shared Network Drive
Advertisement

Expert Interview

Thanks for reading our article! If you’d like to learn more about computers and technology, check out our in-depth interview with Luigi Oppido.

About This Article

Luigi Oppido
Co-authored by:
Computer & Tech Specialist
This article was co-authored by Luigi Oppido and by wikiHow staff writer, Jack Lloyd. Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years. This article has been viewed 888,343 times.
How helpful is this?
Co-authors: 28
Updated: December 14, 2024
Views: 888,343
Article SummaryX

1. Log into the router's admin page.
2. Open the settings page.
3. Open the DHCP settings.
4. Enable the DHCP server.
5. Save your settings.

Did this summary help you?

Thanks to all authors for creating a page that has been read 888,343 times.

Is this article up to date?

Advertisement