How to Use AirPods with a Peloton Exercise Bike

Sync your Apple Airpods to your Peloton treadmill for hands-free exercise

Co-authored by Josef Storzi and Megaera Lorenz, PhD

Last Updated: May 18, 2024 Fact Checked

One great feature of Peloton exercise bikes and treadmills is that you can play music while you ride or run. If you want to listen over your AirPods, you can easily connect them using Peloton’s built-in Bluetooth settings. In this article, we’ll guide you through the steps to do it, and also discuss how to avoid common connection problems.

1

Make sure your AirPods aren’t connected to another device.

Download Article

If they’re currently connected to your phone, computer, or another device, go into the Bluetooth settings on the device. Select your AirPods from the list of paired devices, then disconnect them.^{[1]
X
Research source}

2

Click the menu button on the Peloton home screen.

Download Article

Look for the menu button … in the bottom right corner of the home screen, then tap it. A menu will pop up on the right side of the screen.^{[2]
X
Research source}

3

Tap Device Settings in the popup menu.

Download Article

You should see an option labeled
Device Settings. Tap it to open a new menu screen.^{[3]
X
Research source}

4

Find the Bluetooth settings on the left side of the screen.

Download Article

Tap
Bluetooth to open the Bluetooth settings menu.^{[4]
X
Research source}

5

Toggle Bluetooth on.

Download Article

If not, tap the toggle button
on the top right side of the screen to turn it on. Once you’ve turned on Bluetooth, the word On should appear at the top left side of the screen.^{[5]
X
Research source
hhttps://support.apple.com/en-us/HT208718}

6

Put your AirPods in their case.

Download Article

Open the AirPods case. This will allow your AirPods to connect with the Peloton.

7

Press and hold the setup button on the back of the case.

Download Article

Once it does, your AirPods should be in pairing mode.^{[6]
X
Research source} You may need to hold the button for 3-5 seconds.

8

Select AirPod from the list of devices on the Peloton screen.

Download Article

It should appear once the AirPods are in pairing mode. Make sure your Peloton is still displaying the Bluetooth settings screen. When you see AirPod appear in the list of available devices, close your AirPods’ case.^{[7]
X
Research source} Tap AirPod on your Peloton screen to select it.
- After you select AirPod, you should see the device’s status in the list change to Paired.

9

Tap the Peloton logo on the bottom of the screen to return to home.

Download Article

It’s located in the bottom center of the screen. This will take you back to the Peloton Featured page.^{[8]
X
Research source}

10

Test a ride with your AirPods in to make sure they play music.

Download Article

Select a ride or run with a music track and start it to make sure that you can hear the music through your AirPods.^{[9]
X
Research source}

11

Check for common issues if you can’t hear music.

Download Article

Make sure your AirPods are charged and correctly connected. If you’re having trouble getting the AirPods to connect or play music, there are a few simple troubleshooting techniques you can try:^{[10]
X
Research source}
- Charge your AirPods completely if you think the batteries may be dead.^{[11]
  X
  Research source}
- Turn Bluetooth off and on again in your Peloton settings, then try reconnecting.
- Double check that your AirPods aren’t connected to another device.

12

Wipe your AirPods clean and let them dry completely after use.

Download Article

Some AirPods are sweat resistant, but they still need proper care. AirPods Pro and 3rd Generation Airpods are built to hold up to a bit of moisture, so don’t worry about breaking a sweat during your Peloton workout. However, to keep your AirPods working properly, clean them after every ride or run. Wipe them with a soft, dry, lint-free cloth and let them air dry before using them again.^{[12]
X
Research source}
- Never submerge your AirPods in water or expose them to soaps or detergents. Allow them to air dry, and don’t use heated or pressurized air to speed up the drying process.

Expert Q&A

Search

Add New Question

Question

How do you connect AirPods to a phone?

Josef Storzi
Apple & Mobile Phone Repair Specialist
Josef Storzi is an Apple and Mobile Phone Repair Specialist and the Owner of Imobile LA, a mobile phone repair company based in Los Angeles, California. Josef specializes in repairing screens, charging ports, batteries, water damage, speakers, and microphones on all mobile phone brands including Apple, Samsung, LG, Nokia, and Sony. He also specializes in tablet, laptop, and computer repairs as well as the pros and cons of recent mobile software updates.

Josef Storzi

Apple & Mobile Phone Repair Specialist

Expert Answer

To set up AirPods, open the AirPods case next to your phone. A dialog box will appear on your iPhone asking you to connect to them. Click connect.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 0