How to Connect a Car Stereo for House Use With a Psu

Author Info

Last Updated: October 22, 2024

Did you know that you don't need to buy a stereo specifically for home use? You can use your car stereo. Follow these steps to safely connect your car stereo to your home power supply.

Method 1

Method 1 of 2:

On the PSU

Download Article

on my PSU, there are black, blue, yellow, orange, red, and green.

Advertisement
^{[1]
X
Research source}
^{[2]
X
Research source}

Method 2

Method 2 of 2:

On Stereo

Download Article

) wire.^{[3]
X
Research source}
^{[4]
X
Research source}

Community Q&A

Search

Add New Question

Question

I carried out all instructions in the article, but I'm getting very few stations and lot of static. Do I need an an aerial to receive good reception?

Community Answer

You need a proper antenna. Otherwise, the radio won't get enough signal. Also, use a good quality wire for connecting the antenna to the radio.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 6
Question

Is the procedure the same for a 24 pin connector?

Guna Vardhan

Community Answer

The 24pin Header will only go in one way. Check the pin header carefully for damage and make sure none of the pins are bent. AS you have RMA'd the board, I'd suggest the issue is with the Pin Header or if it's an older PSU, it may predate current ATX 2.2 power connection standards.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 1
Question

What PSU should I use for this?

Community Answer

Any PSU from a PC should work. You can either buy one or try to find an old one from a computer. It doesn't matter how many W it is, or whether it's modular or not.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 5