How to Convert Millimeters to Inches

Reviewed by Grace Imson, MA

Last Updated: January 4, 2024 References

There are many online tools that convert millimeters to inches (mm to in), but most teachers require you to show your work. All you need for any conversion is the "conversion factor"^{[1]
X
Research source} and basic arithmetic. This same basic process will come in handy for all math and science classes, as well as everyday life.

Convert Millimeters to Inches

Use this conversion calculator to convert millimeters to inches.

LENGTH

=

Formula

Method 1

Method 1 of 2:

Converting Millimeters to Inches

Download Article

1
Learn the conversion factor. One inch is the same length as 25.4 millimeters.^{[2]
X
Research source} You can write this "conversion factor" as a fraction: ${\frac {1inch}{25.4mm}}$ ${\frac {1inch}{25.4mm}}$ .
- Any two units have a special conversion factor for converting between them. If you don't know what it is, you can look it up online or in a textbook.
2
Understand the conversion factor. The top and bottom of the fraction are the same length, just written in different units. This means the fraction is equal to 1, just like the fractions ${\frac {3}{3}}$ ${\frac {3}{3}}$ or ${\frac {8}{8}}$ ${\frac {8}{8}}$ simplify to 1.
- Remember, multiplying a number by 1 doesn't change its value. That means you can multiply your measurement by this factor and the length will be the same. The only difference is the units: your answer will be written in inches instead of millimeters.^{[3]
  X
  Research source}
Advertisement
3
Write down the multiplication problem. Make sure to write down all units in your measurement. For example, here's what you would write down to convert 16 millimeters (mm) into inches (in):^{[4]
X
Research source}
- 16 mm x ${\frac {1in}{25.4mm}}$ = ?
4
Cancel out the units. If the same unit appears on the top and bottom of a fraction, they cancel out. If you've set up your problem correctly, the millimeters will cancel out and you'll be left with just inches.
- 16 mm x ${\frac {1in}{25.4mm}}$ = ?
- Cancel out the millimeters:
  16 x ${\frac {1in}{25.4}}$ = ?
- Since the only unit left is inches, your answer will be in inches.
5
Solve the problem. Finish the math problem by hand or on a calculator.^{[5]
X
Research source}
- 16 x ${\frac {1in}{25.4}}$
- = 16 in ÷ 25.4
- = about 0.63 inches

Method 2

Method 2 of 2:

Estimating in Your Head

Download Article

1
Memorize useful conversions. If you can remember that 1 mm = ${\frac {1}{25.4}}$ ${\frac {1}{25.4}}$ inches, that's great. But this conversion doesn't come up very often. It's more useful to memorize these common conversions:^{[6]
X
Research source}
- 1 cm = about 0.4 inches
- 1 cm = 10 mm
- 1 inch = exactly 2.54 cm (you don't need this for this conversion, but it's a good one to know)
2
Convert millimeters to centimeters. This is easy to do in your head. Just divide the millimeter measurement by 10.^{[7]
X
Research source} All you have to do is move the decimal point one digit to the left. If you're not sure why this works, look at this example:
- 430 mm
  = 430 mm x ${\frac {1cm}{10mm}}$
  = 43 cm.
3
Estimate the centimeter to inch conversion. The 1 cm = 0.4 in is close enough for most purposes.^{[8]
X
Research source} But how do you multiply by 0.4 in your head? Here are two different ways to do it, continuing with the same example:
- Divide by two, then subtract 1/10 of the cm value:
  43 cm ÷ 2 = 21.5
  → 1/10 of 43 is 4.3
  → subtract the second number from the first: 21.5 - 4.3 = 17.2 in.
- Or divide by ten, then multiply by four:
  43 cm ÷ 10 = 4.3
  → 4.3 x 4 = (4 x 4) + (0.3 x 4) = 16 + 1.2 = 17.2 in.
4
Understand that this is an estimate. Learning how to do this will come in handy for quick real-life estimates, where the exact answer is usually not important. It's not a good idea for homework problems that require an exact answer, but you can use it to double check your answer and make sure it's in the right ballpark.
- In the example, the exact answer is actually 16.921 inches. The estimate is less than a third of an inch off, which is pretty good for mental math.

Community Q&A

Search

Add New Question

Question

What is the formula for 15.9mm = 5/8 inch?

Donagan

Top Answerer

There are 25.4 millimeters in one inch. 25.4 mm multiplied by 5/8 = 15.875 mm. Proceeding in the other direction, 15.875 mm ÷ 25.4 = 0.625 in, which is 5/8 of an inch.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 25
Question

What is 2" equal to in mm?

Donagan

Top Answerer

Each inch equals 25.4 millimeters.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 15
Question

Is .31 mm equal to 5/16 inch?

Donagan

Top Answerer

No. One millimeter equals 0.03937 inch, so multiply 0.03937 by 0.31. It's much less than 1/16 of an inch.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 12

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Some guides will tell you to multiply by 0.0393701 instead.^{[9]
X
Research source} This will work as well, since ${\frac {1in}{25.4mm}}$ = 0.0393701 in/mm.

Thanks
Helpful 0 Not Helpful 0
If you're measuring an area, you'll need to convert from square millimeters (mm²) to square inches (in²). To do this, multiply by ${\frac {1in^{2}}{645mm^{2}}}$ (or ${\frac {1in^{2}}{645.16mm^{2}}}$ if your measurement is very precise). Note that 645.16 = 25.4².

Thanks
Helpful 0 Not Helpful 0
For volume measurements, convert from cubic millimeters (mm³) to cubic inches (in³). Multiply by ${\frac {1in^{3}}{15800mm^{3}}}$ , or by ${\frac {1in^{3}}{15806.42mm^{3}}}$ for an exact answer. Note that 15806.42 = 25.4³.

Thanks
Helpful 0 Not Helpful 0