PDF download Download Article PDF download Download Article

This wikiHow will teach you how to copy and paste in Minecraft using a variety of methods. As long as you're hosting or are an operator in your own Minecraft server and have the WorldEdit plugin installed, you can copy and paste buildings either within a single world or across worlds. If you don't have server permissions or WorldEdit, you can still use the "/clone" command to copy and paste structures from one location to another. Or, if you don't need either of those, you can copy and paste text from the chatbox.

Method 1
Method 1 of 4:

Cloning Structures in Minecraft

PDF download Download Article
  1. Build or find the structure you want to clone. Make sure cheats are enabled in your game before continuing.
  2. This will include coordinates for your character's current location as well as coordinates for the block they are looking at.
    Advertisement
  3. Just like with the /fill command, you can only clone 32,768 blocks, so anything bigger than that will require you to clone your structure in sections.[1]
  4. You can do this by pressing T if you're on a computer or by pressing the right directional arrow on the directional pad (the 4 directional arrows) on your controller (for Xbox, PS4, and Switch). The chatbox allows you to insert various console commands in addition to talking to other players.[2]
  5. Type it in to fill in each set of coordinates based on the ones you determined earlier.
    • Do not include the angle brackets in your command and make sure that they are separated by a space.
    • Alternatively, you can also type /clone then tap the Tab key to get the results for the coordinates of the block you're currently looking at, then press Enter to send the chat.
      • You'll get an error message that your command was incomplete, but you don't need to worry about that since you're still in the process of cloning. Move to the block in the opposite corner of your structure, then open the chatbox and press the UP arrow to refill the chat with your previous command (which includes the coordinates for the other block). Press the Tab key to get the coordinates for the block you're looking at, then press Enter or Return again.
      • You'll still need to fetch the last set of coordinates (the destination) for the command using the F3 key and looking at the spot where you want the lowest point of your clone to build. Don't use this method if you're not looking at the block you want to use in your clone.[3]
  6. The area will then appear at the <x> <y> <z> coordinate.
    • By default, the cloning mode is Replace, which copies every block in the selected area. If, however, you want to change this, type filtered or masked after the /clone command.
  7. Advertisement
Method 2
Method 2 of 4:

Copying and Pasting Structures in Minecraft

PDF download Download Article
  1. Log into your SMpicninc Control Panel at https://serverminer.com/login. Once you log in using any web browser you like, you'll be able to continue.
    • Click Stop at the top of the page. If you don't see this with the power icon, click Server Manager from the menu on the left.
    • Click Installer from the menu panel on the left side of the page.
    • Click to install either Craftbukkit or Spigot, it doesn't matter which.[4]
  2. Navigate back to Server Manager and click Plugins in the menu panel on the left side of the page.
    • Enter "WorldEdit" in the box labeled "Filter by Plugin Name" and press Enter. When the search concludes, you'll see the plugin listed on the page.
    • Click Install. Once you have the plugin installed, navigate back to Server Manager and restart your server.[5]
  3. If this is not a world you host on your server, you won't be able to use any of the plugins you just installed and can't continue.
  4. A wooden ax will show up in your hand.[6]
  5. For example, if you are copying a house, you'll want to select the highest point on the front, left side (left-click) as well as the lowest point on the back, rear side (right-click).
    • When you left- and right-click the first and second points, you should see text that reflects your selection.
  6. You'll see confirmation in the chat that your building has been copied as well as how many blocks are copied.
  7. The copied building will appear where you were looking.[7]
  8. Advertisement
Method 3
Method 3 of 4:

Copying and Pasting Structures to Another World

PDF download Download Article
  1. Log into your SMpicninc Control Panel at https://serverminer.com/login. Once you log in using any web browser you like, you'll be able to continue.
    • Click Stop at the top of the page. If you don't see this with the power icon, click Server Manager from the menu on the left.
    • Click Installer from the menu panel on the left side of the page.
    • Click to install either Craftbukkit or Spigot, it doesn't matter which.
  2. Navigate back to Server Manager and click Plugins in the menu panel on the left side of the page.
    • Enter "WorldEdit" in the box labeled "Filter by Plugin Name" and press Enter. When the search concludes, you'll see the plugin listed on the page.
    • Click Install. Once you have the plugin installed, navigate back to Server Manager and restart your server.
  3. If this is not a world you host on your server, you won't be able to use any of the plugins you just installed and can't continue.
  4. A wooden ax will show up in your hand.
  5. For example, if you are copying a house, you'll want to select the highest point on the front, left side (left-click) as well as the lowest point on the back, rear side (right-click).
    • When you left- and right-click the first and second points, you should see text that reflects your selection.
  6. You'll see confirmation in the chat that your building has been copied as well as how many blocks are copied.
  7. You can change the name of the save to something easier to remember if you want.
    • This command saves your copy to a file on your computer so you can access it from another world instead of your clipboard.
  8. The saved building will load to your clipboard as if you just copied the original building, so it's ready to paste.
  9. The copied building will appear where you were looking.
  10. Advertisement
Method 4
Method 4 of 4:

Copying and Pasting Text in Minecraft

PDF download Download Article
  1. You can do this by pressing T if you're on a computer or by pressing the right directional arrow on the directional pad (the 4 directional arrows) on your controller (for Xbox, PS4, and Switch). The chatbox allows you to insert various console commands in addition to talking to other players.
  2. Using your mouse, select text to highlight it.
    • Alternatively, press Ctrl/Cmd + A to select all the text.
  3. This keyboard combination will copy the highlighted text to your clipboard.
  4. You can paste the copied text anywhere. If you want to paste the copied text more than once, press that key combination again.
    Jesse Stay
    Jesse Stay, Minecraft Guide Author

    In Minecraft, copying text or commands with Ctrl + C (Windows) or Command + C (Mac) and pasting with Ctrl + V (Windows) or Command + V (Mac) can save time. You can paste copied text into signs, books, anvils for renaming, and directly into the chat to run slash commands. This shortcut replicates text easily instead of retyping everything.

  5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!

You Might Also Like

Play Minecraft Cross Platform Play Minecraft With Friends on Other Platforms (Crossplay)
Make Netherite Armor Make Netherite Armor: Start-to-Finish Minecraft Tutorial
Get Minecraft for FreeGet Minecraft for Free
Download Minecraft for Free
Fix Connection Reset MinecraftMinecraft: 5 Quick Fixes for Java.Net.SocketException Error
Make a Minecraft Texture Pack
Use /Fill in MinecraftUse /Fill in Minecraft
See Chunk Borders in MinecraftShow Chunk Borders in Minecraft: Tutorial for Bedrock & Java
Change Tick Speed in Minecraft Change the Random Tick Speed in Minecraft: Quick Guide
Find Your Way to Your House when Lost in MinecraftFind Your Way to Your House when Lost in Minecraft
Breathe Underwater in Minecraft Breathe Underwater in Minecraft: With and Without Potions
Make a Potion of Invisibility Minecraft Make Invisibility Potion in Minecraft: Complete Guide
Find the End Portal in MinecraftFind the End Portal in Minecraft
Find Your Coordinates in MinecraftFind Your Coordinates in Minecraft
Advertisement

About This Article

Darlene Antonelli, MA
Written by:
wikiHow Technology Writer
This article was co-authored by wikiHow staff writer, Darlene Antonelli, MA. Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field. She earned an MA in Writing from Rowan University in 2012 and wrote her thesis on online communities and the personalities curated in such communities. This article has been viewed 233,257 times.
120 votes - 38%
Co-authors: 8
Updated: November 28, 2024
Views: 233,257
Categories: Minecraft
Article SummaryX

1. Log into your SM Control Panel and install either Craftbukket or Spigot as your Server Jar.
2. Install the WorldEdit plugin.
3. Load your Minecraft world and type //wand.
4. Select two points on either side of your building by left-clicking one corner and right-clicking the other.
5. Type //copy.
6. Navigate to another area where you want to paste your copied building.
7. Type //paste.

Did this summary help you?

Thanks to all authors for creating a page that has been read 233,257 times.

Did this article help you?

Advertisement