How to Create a Reverse Painting on Glass

Co-authored by Veronica Winters

Last Updated: December 15, 2022 Approved

Reverse painting on glass is a super cool form of painting where the artist paints in reverse order on (you guessed it) glass. If you've never reverse painted on glass before and want to try it out, we've got you covered. Keep reading to learn everything you need to know to get started, from setting up your glass canvas to mixing and applying your paints.

Part 1

Part 1 of 4:

Setting Up Your Glass Canvas

Download Article

This glass will be your canvas for the image you want to paint. You should clean off this glass thoroughly and make sure that there aren't any scratches on it.
This process will make the glass safe for you to handle while you're painting it and afterward. However, be careful not to scratch the glass.

Advertisement
Use a cotton rag to thoroughly clean and rinse the glass with an abrasive cleanser and warm water. After you clean it, make sure that there are no streaks in it. If there are streaks, wash it again. When you rinse and dry the glass, it should be perfectly clear.^{[1]
X
Research source}
Print it so that it is exactly the same size as your piece of glass. Trace the image onto tracing paper.
5
Attach your image and the glass to cardboard. The cardboard will provide a sturdy base to work from. It will also prevent tracing paper from tearing.
- Use two 4-inch strips of masking tape to attach the traced image to a piece of white cardboard, larger than your glass pane. Place the strips over the top corners of the traced image.^{[2]
  X
  Research source}
- Attach the glass to the cardboard with small (2-inch) masking tape rings on the underside of the glass, so that you do not cover your painting surface with tape. As you handle the glass, consider wearing gloves to avoid leaving oily fingerprints on the glass face.^{[3]
  X
  Research source}
- Make sure the image is centered under the glass.
- Use white cardboard so that the lines from your image are visible and un-muddied by a dark color behind them.
This will prevent line doubling, when viewed from above.^{[4]
X
Research source}

Part 2

Part 2 of 4:

Mixing Paints

Download Article

You will need to paint in sections, allowing different areas time to dry. Drying typically takes 24 hours. For this reason, only mix colors that are needed in a specific area, to avoid having wasted, unused paint on your palette. The first colors to pour are those for line work and small detail. The last colors you will want to do are the background of the image, like the sky.
2
Get your desired paint colors ready. You should buy oil paint; 37 ml tubes should be sufficient, unless your glass is very large.^{[5]
X
Research source} If you do not have the exact paint shades that you would like for your painting, begin by mixing paints to get your desired colors.
- Squeeze the amount needed (small for a small area, more for a large area) of a light color onto palette paper, wax paper, aluminum foil, or a mixing palette. Add a small dab of the darker primary color to the light color. Mix well with a palette knife or brush. Keep adding small amounts of dark or light until you get the desired shade.
3
Blend quick dry gilding size with the paint. Once you have the desired color/shade, add gilding size to your paint to help it adhere to the glass. Because glass is non-porous, it does not take paint well. You must use gilding size to help the paint adhere to and dry quicker on the glass.
- Pour a small amount of size directly onto your already-mixed paint and begin blending it in. Add size as needed to larger paint piles. The desired ratio is 1/2 paint to 1/2 size. Blend thoroughly with a palette knife or paint brush.^{[6]
  X
  Research source}
Separating the paints will help you avoid accidental color mixing.

Part 3

Part 3 of 4:

Painting on the Glass

Download Article

1
Begin painting. Reverse glass paintings must be painted from front to back (reverse painting order) because of how the image is viewed through the glass.^{[7]
X
Research source}
- Keep this in mind when setting up paint colors and selecting brushes. You want to start with the small details and end with the big things. It's the opposite of how you would paint a typical painting.
- Use a variety of brand-name, good quality paint brushes to avoid streaking. You can go to an art store and ask the people who work there which brushes are best for your purposes.
2
Paint all lines first. The lines are important because they will help you fill in the rest of the painting. Try using radiography pens for extra fine line work.^{[8]
X
Research source}
- Use the original image as a reference to make sure that you only paint solid lines where they should be.Sometimes, you may trace lines in an image because they indicate a color break or change, but you must remember they may not be actual solid lines.
- Once all of the lines have been painted, wait 24 hours before continuing. This will allow the paint to dry properly and avoid smudging.^{[9]
  X
  Research source}
3
Paint the smallest areas and details first. You want to paint the details before you paint the foreground. You want to paint the background last.
- As you paint, make sure that you avoid painting adjacent areas at the same time. If there are areas close to each other that are included in foreground but are different colors, wait for the first area you paint to dry before continuing. Placing different colors of wet paint next to each other may cause unwanted color mixture.^{[10]
  X
  Research source}
- Allow the painted areas 24 hours to dry.
4
Paint medium areas. Paint the medium sized areas that are larger than the detailed foreground. This is generally the main image within a painting. The “main image” should not be the small details of a painting or the background of the painting.
- Make sure that you wait 24 hours after you complete this section.
5
Paint large areas. The last area to be painted on a reverse glass painting is the large background, such as a landscape.
- If the background is a landscape, paint grassy areas first. Allow drying time before doing sky and water.^{[11]
  X
  Research source}

Part 4

Part 4 of 4:

Fixing and Finishing Your Piece

Download Article

1
Fix any mistakes immediately. Because you layer the paint on top of itself, you cannot just paint over a mistake. You should take it off and fix it immediately.
- Dip an angled shader brush in lighter fluid, wipe it on a paper towel, and then brush it over the mistake. Doing this will remove unwanted paint from the glass. Carefully blot the area dry with a clean, cotton rag or allow it to air dry before reapplying paint.^{[12]
  X
  Research source}
After the paint has dried, make your masterpiece eye-catching by putting it in an image-complementing frame.^{[13]
X
Research source} Take the painting to a craft store for professional framing, or construct your own frame.
3
Work at developing more advanced painting techniques. After you finish this painting, look into perfecting more advanced techniques. Once you have perfected basic “reverse order” painting, try adding depth.
- Adding the different elements of image stippling, blending, and shading to your work will make a more completed, three dimensional painting.^{[14]
  X
  Research source}

Expert Q&A

Search

Add New Question

Question

What advice do you have for starting off an illustration when you’re using oil paints?

Veronica Winters
Figurative Artist
Veronica Winters is a Figurative Artist who owns an online art gallery and studio in Naples, Florida. With over 20 years of experience, Veronica specializes in surreal figurative oil paintings and colored pencil drawings. In 2022, she won the Award for Distinction at the 30th Annual Colored Pencil Society of America International Exhibition. Veronica is also a published author of two art books: How to Color Like an Artist and The Colored Pencil Manual. She received her BFA in Studio Art at Oklahoma State University and her MFA in Painting at Pennsylvania State University. Veronica also studied classical drawing at the Grand Central Academy of Art and the Art Students League of New York.

Veronica Winters

Figurative Artist

Expert Answer

Choose a reference picture to work of that has a clear division between light and shadows. This means that you want to see strong highlights and very definite shadows. When you follow this breakdown between the light and the shadows, it's easy to paint a realistic illustration even if the colors in the reference are different from the oil paints you have.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

What colors can I mix together if I want to create some gold paint for my reverse painting?

Veronica Winters
Figurative Artist
Veronica Winters is a Figurative Artist who owns an online art gallery and studio in Naples, Florida. With over 20 years of experience, Veronica specializes in surreal figurative oil paintings and colored pencil drawings. In 2022, she won the Award for Distinction at the 30th Annual Colored Pencil Society of America International Exhibition. Veronica is also a published author of two art books: How to Color Like an Artist and The Colored Pencil Manual. She received her BFA in Studio Art at Oklahoma State University and her MFA in Painting at Pennsylvania State University. Veronica also studied classical drawing at the Grand Central Academy of Art and the Art Students League of New York.

Veronica Winters

Figurative Artist

Expert Answer

In general, you create gold with some brown paint⁠—like burnt sienna, burnt umber, yellow ochre or raw sienna⁠—and white. Add other colors, like cadmium yellows or reds, depending on how dark you want your gold tone to be. Put raw umber or ivory black into the mix to create a shadowy effect. A really nice ochre color that helps you warm up your gold tones is "gold ochre," which is sold by Gamblin Artist. It's perfect if you want a gold color in a medium tone.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 1
Question

What paint should I use on wine glasses?

Community Answer

Use paint pens made for writing on glass. You can get them at the hardware store.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 7

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Try carefully coating unpainted areas of glass with mercury. Professional artists do this to create an illusionary spatial effect in the image.^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
When doing a reverse glass painting, always paint lines, details, and the images in the foreground first.

Thanks
Helpful 0 Not Helpful 0
The effect that glass can give to a reverse painting can make it a very beautiful object. In order to enhance this effect, consider using a thicker pane of glass.

Thanks
Helpful 1 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Always store glass in a safe place away from kids and pets.

Thanks
Helpful 2 Not Helpful 0
If using mercury, handle with extreme caution. It is a highly toxic element.

Thanks
Helpful 0 Not Helpful 0
Remember that when viewing a reverse glass painting from the front, the image is reversed. This is important to keep in mind if you are incorporating words.

Thanks
Helpful 0 Not Helpful 0
Maintain a dust free environment. Dust in your paints and on the glass will prevent you from having a clean looking finished product.

Thanks
Helpful 0 Not Helpful 0
Always work in a well-ventilated area. Oil paints and lighter fluid both produce toxic odors.

Thanks
Helpful 0 Not Helpful 0