How to Decoupage Jars

Download Article

Explore this Article

parts

1 Preparing the Jar

2 Selecting and Cutting the Images

3 Applying Images to the Jar

Other Sections

Expert Q&A

Things You'll Need

Related Articles

References

Co-authored by Nicole Bolin

Last Updated: May 30, 2024 Fact Checked

Download Article

Decoupage is an easy craft technique that uses a special glue to affix paper or fabric to a hard surface. Decoupaging a jar is an enjoyable way to add interest to a plain glass jar. This project has many possibilities, as both the style of the jar and the added decoupage images can vary. From kitchen drinking glasses to bathroom supply jars, gift jars, and display jars, this article will help you to learn the basics of decoupage.

Steps

Part 1

Part 1 of 3:

Preparing the Jar

Download Article

1. 1
   Choose a glass jar that has sufficient surface space for images. If you are a beginner to decoupaging jars, it is best to start with a jar with a larger surface. Once you have the experience, you can downsize to smaller jars later. A large jam jar or mason jar is a great start because they are big and easy to hold.

   • Another thing to consider is the appeal of the jar. A basic mason jar may be too plain or not interesting enough to you. If the jar has a unique shape, this can heighten the appeal of the end look once the project is completed.
2. 
   2
   Wash the jar in warm, soapy water. Begin by removing any labels attached to the jar, along with the leftover adhesive left behind. If the adhesive proves stubborn, use a rubbing oil to assist, such as orange oil or eucalyptus oil. Glass jars also tend to get a lot of fingerprints on the outside. Wash the surface of the jar you chose with a cloth, mild soap, and warm water.

   • If soap and water are not enough, use some rubbing alcohol on a cotton ball to wipe the surface of the glass. This will remove any additional grease or grime on the jar.
   Advertisement
3. 3
   Allow the jar to dry fully before using it. Make sure the glass is dry before you begin your project. Also check that all adhesive has been removed, along with any unpleasant odors. If you have an older glass jar with remaining odors, either wash again or use an odor removal technique such as soaking with vinegar or washing out with baking soda.

   • If you’re using a drinking glass, place a piece of tape around the top of the glass to avoid your lips coming in contact with leftover glue.
Advertisement

Part 2

Part 2 of 3:

Selecting and Cutting the Images

Download Article

1. 1
   Decide what image(s) you would like to use on your jar. Think of what images you would like to put on your jar. The choice of image is completely up to you, and you can choose a variety of materials, such as wrapping paper, fabric, wallpaper, or even ribbons.

   • If you’re having trouble selecting an image, consider the end use intended for the jar as a guide. For example, if the jar is to contain candy, find images with pieces of candy or other tasty treats.
   • If you want to do an autumn theme, you can get real or fake fall leaves to adhere to your jar.
2. 
   2
   Cut the images to fit the jar. If you printed out an image on paper, use scissors to cut around the image so that it fits on your jar. You may want to measure the image you’re cutting to make sure it will fit the jar.

   • If you’re using fabric, make sure to use fabric scissors to cut it.
3. 
   3
   Use a craft or cutting knife to trim away any excess paper. If you printed an image with intricate details, such as a flower, you can use a small cutting knife to trim away any excess paper. Before cutting, place the image on a cutting mat to protect your work surface. Then use the craft knife and press it against the image to slowly cut around the edges.
4. 
   4
   Arrange the images on the jar to your liking. Before you begin decoupaging, place your images on the jar, so you get an idea of how you would like to arrange them. They can be in any placement you prefer, and can even overlap.

   • If you need to, make small marks with a light maker to clarify the exact positioning of the imaging on the jar. You can use a pen suited to glass if you need to make placement markers on the jar.
Advertisement

Part 3

Part 3 of 3:

Applying Images to the Jar

Download Article

1. 
   1
   Prepare the work surface by laying down paper. Lay out a sheet of grease-proof paper, like parchment paper, on your table or workspace. This protects the surface from glue residue. Parchment paper provides a good surface because it won’t stick to the glue you put on your jar.

   • Avoid newspaper when covering your workspace. It will stick to your mason jar and ruin your project.
2. 2
   Decide on a decoupage medium, or glue, to adhere your images to the jar. There are a variety of mediums to choose from at a craft store. Some popular decoupage glues, such as Mod Podge and Collage Pauge, are made especially for decoupaging. When purchasing your glue, consider the type of finish you want. You can get gloss for a shiny finish, or matte for a flat finish.

   • You can also make your own decoupage glue with water and basic white craft glue. Pour 1-part water and 1-part glue in a paper cup and mix it with a craft stick. Make sure to stir it well and use it quickly before it dries.
3. 
   3
   Paint a thin layer of decoupage glue on the jar. Dip your sponge brush in the decoupage glue, and carefully paint a thin layer on your glass jar. If you are only putting the image on one section of the jar, just paint that section. If you are putting images around the entire jar, cover it with glue. Make sure to completely cover the areas your pictures will touch.

   • If the images are small, or you’re layering them, put the decoupage glue on the back of the image. To do this, lay the image face down on the grease-proof paper. Use the sponge brush to evenly apply the decoupage glue to the back.
   • The layer needs to be thin, otherwise the pictures might get too wet and tear.
4. 
   4
   Place the images onto the jar. Once you have put all the glue you need on the jar or the back of the pictures, you can place them on the surface. If you made marks on your jar earlier, use these to guide your placement. Otherwise, add the images wherever you’d like. Use your fingers to gently push down and smooth out any wrinkles.

   • If you made a mistake with your positioning on the jar, use tweezers to remove or adjust the image. This will help to avoid sticky fingers.
   • Repeat for any additional images being added. If you decided to overlap any images, do so with care to ensure that the images look neat and appropriately placed.
5. 5
   Allow the decoupage glue to dry. Before moving forward with the next steps, wait for the decoupage glue dry completely. This may take an hour or more, depending on the thickness of the paper you used to cover the jar.

   • Small air bubbles may form while the glue is drying. If this happens, use a safety pin or utility knife to pop them. Then use your fingers to smooth it out.
6. 
   6
   Apply 2 to 3 layers of the decoupage glue on the jar to seal the images. Once the glue has dried, use the sponge brush to apply a layer of the decoupage glue directly on top your images. Allow this layer to dry for two hours, and then add another one. Keep adding coats of the glue until the edges of your pictures are smooth.

   • Make sure you allow the glue to dry for at least two hours before adding another coat.
   • The decoupage glue will appear cloudy when first added, but it will dry clear.
7. 7
   Wait for your jar to dry before you use it. It is important to wait until your jar is completely dry before touching it. You don’t want to mess up all the work you just did. To play it safe, let it dry overnight. The next day, it should be completely safe to pick up without messing up the pictures.
Advertisement

Expert Q&A

Search

Add New Question

• Question

  How do you glue paper to glass jars?

  

  Nicole Bolin
  Crafts & DIY Specialist

  Nicole Bolin is a Crafting Specialist and the CEO of Stencil, a DIY Craft Studio in Phoenix, Arizona. Nicole specializes in interior design and various craft and DIY projects. Nicole holds a Certificate in Interior Design from the New York Institute of Art and Design. She opened Stencil in 2017 to teach others to create DIY projects that fit their home and lifestyle.

  

  Nicole Bolin

  Crafts & DIY Specialist

  Expert Answer

  Put a thin layer of decoupage glue like Mod Podge onto the glass. Then, paint a layer of glue on the back of the paper and place it on the jar. Once the paper has dried on, put a second coat of Mod Podge over its surface. It's important to let it dry first, otherwise when you add the second layer the paper may get too wet and tear.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 1 Helpful 13

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You’ll Need

• Decoupage image(s), either paper or fabric
• Decoupage glue or finish (or use thin, white craft glue)
• Sponge brush (1-inch/2.5cm width)
• Craft knife
• Scissors (and fabric scissors if needed)
• Cutting mat
• Tweezers
• Marker pen suitable for glass surfaces
• Freezer paper (aka grease-proof paper)
• Water-based varnish (optional)