How to Fix a Hole in a Shirt

Download Article

Fast and easy ways to mend tiny and large holes in your clothes

Co-authored by Andrea Beaulieu and Mason Martinez, BA

Last Updated: June 18, 2024 Fact Checked

Download Article

• Hand Sewing
|
• Patching (No-Sew)
|
• Creative Alternatives
|
• Video
|
• Expert Q&A
|
• Things You'll Need

|Show more |Show less

Discovering a hole in your shirt can be frustrating. Fortunately, you don’t have to get rid of your shirt because of a minor hole. You can fix the hole in your shirt at home using a needle and thread or a patch. If you use thread or fabric that matches your shirt's color, no one will be able to tell it has a hole! There may also be times when you need to do a creative fix to mend the hole—we have ideas for that, too. In this guide, we interviewed Professional Tailor and Fashion Design Andrea Beaulieu for some of her sewing and no-sew hole repair recommendations.

Easy Ways to Repair a Hole in a Shirt

• Mend a hole by hand using a matte thread that matches the color of your shirt. Work a threaded needle on either side of the hole to bring it close together.
• Cut a patch of matching lightweight fabric and bonding web. Align the patch behind the hole and hold an iron down for 10 seconds to fuse the material.
• Alternatively, you can take a creative approach to repairing small holes by adding decorative patches, embroidery, or turning an old shirt into a sentimental quilt.

Steps

Method 1

Method 1 of 3:

Hand Sewing

Download Article

1. 1
   Select a matte thread that matches the color of your shirt. Choose a thread the same color as the shirt you want to fix so your work doesn't stand out. Opt for a matte thread and avoid thread that’s reflective or shiny so the thread blends in with the texture of your shirt. You can also use clear thread that will be invisible on your shirt.

   • Check to see if you already have any thread that matches your shirt. If you don't, take your shirt to a fabric store and find the thread that most closely matches your shirt.
   • If you can’t find an exact match, go with a darker thread rather than a lighter one. A darker color is likely to blend in and not be noticeable.
2. 
   2
   Thread a needle with your chosen thread. Use fabric scissors to cut off a piece of thread from the spool about 24 inches (61 cm) long. Insert one end of the thread through the small hole at the head of the needle. Pull the thread through the hole until the two ends of the thread are the same distance from the needle. Tie the two ends of the thread together to make a knot.

   • Professional Tailor and Fashion Designer Andrea Beaulieu advises to look at the needles’ packaging to ensure you choose one that's right for the fabric you're using. The smaller the gauge, the larger the number. 8 gauge needles are very thick, so they're best for heavy-weight woven garments, whereas 16 gauge needles are very thin, making them great for delicate, lightweight fabrics.
   • Try dampening the tip of the thread by placing it on the tip of your tongue briefly if you're having trouble getting it through the needle hole.
   Advertisement
3. 
   3
   Flip the shirt inside out to start your stitch. Poke the needle through the fabric at the top and to the right of the hole from the inside out. Weave through the fabric about .2 inches (0.51 cm) above the hole. If you’re any closer to the hole, the thread may pull out, and your stitch could fall apart.

   • Keep pulling the needle up through the fabric until the knot you made at the end of the thread catches on the fabric.
4. 
   4
   Push the needle down through the hole and back up through the fabric. Position the needle directly to the left of where you first poked the needle through. The closer you are to the previous stitch, the more secure the thread holding the hole together will be when you’re finished. This will allow you to pull the fabric on the left and right sides of the hole together.

   • The goal is to make close stitches that pull the sides of the hole back together.
5. 5
   Continue alternating stitches between the left and right sides of the hole. Repeat your stitches back and forth across the hole. Bring the needle down through the hole in your shirt and poke it up through the fabric directly to the side of the first stitch you made. Make your way down the hole’s perimeter as you make the stitches. As you sew back and forth along the hole, the edges of the hole should get pulled together.

   • Remember, after each stitch, keep pulling the needle up until the thread is tight.
   • Stop sewing once you reach the bottom point of the hole, and it’s completely sewn together.
   • Beaulieu advises to always backstitch before ending your repair so the thread is secure to the fabric.
6. 
   6
   Bring the needle inside your shirt and tie several knots with the thread. Tie the knots so they’re right up against the fabric inside your shirt. To tie the knots, hold the needle between 2 fingers. Wrap the part of the thread coming out of your shirt around the needle 3 times. Pull the needle up through the 3 loops and continue pulling until all the thread has been pulled through.

   • Repeat to create more knots. Having multiple knots will ensure that the stitches stay in place.
7. 
   7
   Cut off any excess thread. Use scissors to cut off the leftover thread after the knot you tied. Then, examine the stitched hole to ensure it has been completely fixed.

   • Beaulieu suggests cutting the thread close to the knot rather than the needle, so you won't have to worry about trimming the thread again.
Advertisement

Method 2

Method 2 of 3:

Patching (No-Sew)

Download Article

1. 1
   Find a fabric that matches your shirt to make a patch. If your shirt has a large hole that is 1–2 inches (2.5–5.1 cm) wide, you can fix it by putting a patch over it. If the shirt is a solid color, look for fabric in that color. If your shirt has a busy print, look for fabric that will blend in with the print. If you have to choose between a darker and lighter shade fabric, go with the darker shade. It will be less noticeable on your shirt.

   • You can get fabric at your local fabric store or use fabric from an old garment you don’t wear anymore.
   • If your shirt has a pocket, you can cut a piece inside the pocket that will perfectly match the shirt. However, you will then need to patch the inside of the pocket with another piece of fabric.
   • Make sure the texture and weight of the fabric you use are similar to the fabric your shirt is made of.
2. 
   2
   Cut out a patch of the fabric slightly larger than the hole. Try to make the patch around .5 inches (1.3 cm) greater than the hole on all sides. Measure the hole in your shirt with a ruler so you know how big a patch to cut out. Outline the patch on the fabric in pencil and cut it out with scissors.
   

   Kristin M. Roach, Sewing and Mending Expert

   When patching a damaged shirt, carefully trim the hole's ragged edges so it lies flat. Cut a patch slightly larger than the hole from matching lightweight fabric. Align the patch behind the hole, pinning the edges smoothly. Use tiny stitches to hand-sew the patch in place, knotting threads inside for invisible mending. With skillful repairs, renew your wardrobe rather than costly replacement.
3. 
   3
   Cut out a piece of fusible bonding web the same size as the patch. A fusible bonding web is a thin, transparent adhesive sheet that will help the patch of fabric stick to the inside of your shirt. Place the patch of fabric you cut out over a sheet of fusible bonding web and trace the patch onto the bonding web with a pencil. Remove the patch of fabric and use scissors to cut out the shape you traced.

   • You can find fusible bonding web online or at your local fabric store.
4. 4
   Cut out the center of the fusible webbing. You only want to have the webbing where the patch touches the fabric, not the area of the hole you cover. To do this, place the bonding web over the hole so the hole is centered. Trace the hole outline with a fabric pen or pencil onto the webbing. Then use scissors to cut out the outline.

   • Keep the outer piece of webbing when you are done cutting. It should have at least .25 inches (0.64 cm) of bonding web on each side of the hole. The circle you cut out of the center can be thrown away or used for a future project.
5. 
   5
   Flip the shirt inside out and place the materials over the hole. Place the bonding web between the hole and the patch of fabric. Line it up over the hole over the shirt so it can’t be seen through. The side of the fabric you want to show through on the outside of your shirt should be facing down.
6. 
   6
   Iron the patch of fabric and bonding web onto your shirt. Press the iron down onto the patch and bonding web and hold it in place. Don’t iron back and forth; this can cause the patch and bonding web to shift. Hold the iron on the patch and bonding web for around 10 seconds.

   • Read the instructions with your fusible bonding web for specific heating and timing instructions.
   • In general, use a heat setting for bonding that is a little higher than the heat you would normally use for the fabric of your shirt.
   • After ironing the patch and bonding web, turn your shirt right side out and the hole should be covered!
Advertisement

Method 3

Method 3 of 3:

Creative Alternatives

Download Article

1. 1
   Do a creative fix with embroidery or decorative patches. If you love a shirt with many holes, consider adding a unique flair to it by embellishing the hole with embroidering. The decorative stitches around the hole will stabilize the fabric and add a creative touch.

   • You can also put an applique over the hole. Putting a decorative patch over the hole, instead of trying to match the existing fabric, can add a bit of fun to an otherwise subdued shirt.
2. 
   2
   Use glue to fix a hole that's not very visible for a no-sewing option. If you do not know how to sew or don't want to, there are still options for fixing your shirt. Various glue products are made to glue the fabric together, and these can be used on your shirt. In fact, if the hole in your shirt is on a seam or in a spot that is not visible, using fabric glue may be the quickest and easiest fix. Simply apply a thin bead of glue over the tear. Let it dry before wearing.

   • Go to your local craft or sewing store and look for products to glue fabric to fabric.
   • Depending on your product, it may discolor the area you are gluing. It may also make the area less soft and flexible.
   • Follow the directions on the glue you buy when fixing your shirt. Different glues have different drying times and techniques for application, so it's important to follow your product's specific instructions.
3. 3
   Turn a shirt that is too far gone into a patchwork project. There may be a point when a shirt has too many holes to make it look presentable or functional. If your shirt is in tatters or has numerous holes, consider letting it go and turning it into a fun project.

   • If you really love a shirt because of its fabric or because of sentimental reasons, consider using the shirt's fabric to make a quilt or other keepsake item. That way, the fabric can continue to be used in a different form.
4. 4
   Have your shirt fixed by a professional tailor if you can't fix it yourself. If your shirt has a large hole or you're worried about ruining it by attempting to fix it yourself, take it to a tailor to have it fixed. A professional tailor will likely be able to fix holes that are practically invisible to the eye.

   • When you take your shirt in to be repaired, talk to the person about your expectations and ask them what they think they can do for you. Giving the tailor clear instructions and understanding what kind of fixes are possible will help you manage your expectations for the repair.
   • A business that does tailoring or alteration should be able to help you. If you don't know of one in your area, do an internet search to find businesses near you.
Advertisement

Expert Q&A

Search

Add New Question

• Question

  What are some different ways I can fix a hole in a shirt?

  

  Andrea Beaulieu
  Professional Tailor & Fashion Designer

  Andrea Beaulieu is a Professional Tailor, Fashion Designer, and the Owner of MOORE, a Brooklyn, New York based storefront and apparel workshop for gender-neutral, contemporary streetwear as well as custom-tailored products. Andrea has over 20 years in the fashion design and marketing industries and specializes in pattern making, draping, and the construction of garments. She holds a BS in Fashion Design and Merchandising from the University of North Carolina at Greensboro.

  

  Andrea Beaulieu

  Professional Tailor & Fashion Designer

  Expert Answer

  Depending on where the hole is and the kind of fabric the shirt is, you may be able to patch it from the inside, or you might be able to adjust the hole into a seam or a dart. If you have a woven knit, the shirt may be able to be rewoven.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 0 Helpful 10
• Question

  My cat ripped a hole in a knitted jumper. What should I do?

  

  T. Chinsen

  Top Answerer

  Place tape on the jumper to minimize the size of the hole. Take a needle with thread slightly darker than jumper. Attach to a jumper thread at least 2 strands away from the edge of the hole. Pull the needled thread horizontally across the hole and again attach to at least 2 strands from the edge of the hole. Repeat this vertically. With needled thread attached, weave a strand across the hole following the pattern of the threads. If this is too complicated, ask for help at a craft store that offers knitting classes. The instructor should be able to help.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 9 Helpful 11
• Question

  I recently discovered a hole in my favorite sweatshirt and I want to sew it. How do I make the stitching unnoticeable?

  

  T. Chinsen

  Top Answerer

  Sweatshirt material is a knit fabric. There are loops that need to have a thread run through each loop to prevent further unravelling. This can be tricky as you need to allow some slack to avoid puckering of the fabric.The edges can then be stitched together or secured with fusible interfacing.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 6 Helpful 4

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Things You’ll Need

Hand Sewing the Hole

• Thread
• Sewing needle
• Scissors

Patching the Hole

• Fabric
• Fusible bonding web
• Scissors
• Pen or pencil
• Ruler
• Iron

Creative Alternatives

• Embroidery Kit
• Fabric glue
• Decorative patches