Your Complete Guide to the Geek Bar Pulse

To use your Geek Bar Pulse after unboxing, remove the plug on the mouthpiece, move the bottom tab to the middle or upper position, and take your first hit. The Geek Bar Pulse is one of the most popular disposable vapes right now, thanks to its LED screen and dual-coil configuration. Figuring out how to use and take care of it can be tough, so we put together this article to teach you everything you need to know about using a Geek Bar Pulse, including the different settings, activating Pulse Mode & more.

How to Use a Geek Bar Pulse

Unbox your Geek Bar Pulse and remove the silicone plug from the mouthpiece.
Move the tab on the bottom to the middle or upper position to turn it on.
Puff on your device to begin vaping. If you’re new to vaping, start with a light puff.

Section 1 of 7:

How to Use a Geek Bar Pulse

Download Article

1
Unbox your Geek Bar Pulse and remove the plug from the mouthpiece. Tear the strip at the top of the box and remove the pouch where your Geek Bar Pulse is located. Open the pouch, then remove the silicone plug from the mouthpiece.
- Be careful when opening the pouch. You don’t want to drop your new Geek Bar Pulse!
- Your Geek Bar Pulse should come with a USB-C charger, the device itself, and a card with a list of other flavors. Some packages include a user manual.
- The flavor card lists the coolness and sweetness levels of each flavor.
2
Move the bottom tab to the middle or upper position to turn it on and change settings. When the tab is in the bottom lower position, your device is off. When it is in the middle position, your device is in standard mode. When it is in the upper position, your device is in Pulse Mode.^{[1]
X
Research source}
- To swap settings on your Geek Bar Pulse, move the tab on the bottom of your device to the middle or upper positions. “Pulse” is written above the upper position to assist in switching settings.
- Pulse Mode offers stronger puffs than standard mode, but it also offers fewer puffs, so keep that in mind when choosing your preferred setting.
Advertisement
3
Lightly puff on your device to check that it works. Lightly puff to emit flavor and vapor so you know that your device works. If you’re a veteran vaper, begin to use your device like usual. If you’re new to vaping, gently puff to avoid spitting up e-liquid.^{[2]
X
Research source}
4
Recharge your Geek Bar Pulse using the USB-C cord. When your Geek Bar Pulse battery gets low, insert the USB-C cord into the port on the bottom of the device to recharge. The screen will glow, and the charge percentage will begin to appear. When your device is in standard mode, you can get a half a day of use before you need to recharge if you’re a moderate vaper.^{[3]
X
Research source}
- The Geek Bar Pulse takes around 55 minutes to charge fully.

Section 2 of 7:

Geek Bar Pulse Settings

Download Article

1
Standard mode uses a single coil and offers 15,000 puffs. This mode is similar to other disposables. Since it alternates between two coils (the heating elements), your puffs will be lightly flavored and hit soft. With the standard mode, you receive a mild experience that lasts longer than other disposables.^{[4]
X
Research source}
- You get more hits with this mode than with other disposable vapes, which usually offer around 600 puffs.
- Activate this setting by pushing the bottom tab into the middle position.
2
Pulse Mode uses both coils for 7,500 stronger, more flavorful puffs. This configuration is the first of its kind. The Pulse Mode activates both coils for stronger, more flavorful hits. Since the puffs are stronger, you only get 7,500 instead of 15,000. Activate this setting by pushing the bottom tab into the upper position.^{[5]
X
Research source}
- If there is a rocket ship on the screen of your device, that means it is in Pulse Mode.

Section 3 of 7:

Why does the Geek Bar Pulse stand out?

Download Article

The Geek Bar Pulse introduced dual-coil configuration and a smart screen. The dual-coil configuration helps it last longer than other disposables, as it switches coils every time you take a puff in standard mode. It also solves the issue of juice and battery display. You can’t check your battery and e-liquid levels on older disposables, but the Geek Bar Pulse has a smart screen that displays both.^{[6]
X
Research source}
- The dual-coil configuration has been implemented into other disposable vapes, but the Geek Bar Pulse was the first to introduce this technology.
- The 650mAh battery, 16mL liquid capacity, and USB-C charging port make the Geek Bar Pulse last longer than other disposable vapes.

Section 4 of 7:

What does the screen mean?

Download Article

The screen shows the battery, mode, and e-liquid level when you puff. Check the battery by looking for the lightning bolt icon at the top of your screen. The five segments and the number next to them indicate your battery level. An empty open circle in the middle of your screen means your device is in standard mode. A rocket ship means your device is in Pulse Mode.^{[7]
X
Research source}
- The e-liquid level is displayed at the bottom of your screen with five segments, numbers, and a droplet icon.

Section 5 of 7:

Taking Care of Your Geek Bar Pulse

Download Article

Regularly charge your Geek Bar Pulse and store it in a cool, dry place. To ensure that your Geek Bar Pulse is performing well, charge it whenever the battery gets low. When you aren’t using it, turn it off and keep it in a cool, dry place away from high temperatures and direct sunlight to preserve battery and maintain e-liquid quality.^{[8]
X
Research source}
- Be careful not to drop your Geek Bar Pulse, as it can cause internal damage or an e-liquid leak.

Section 6 of 7:

Troubleshooting Issues with Your Geek Bar Pulse

Download Article

1
If your Geek Bar is blinking red, the internal puff sensor may be stuck. Red blinking means your device is in safety mode. This is usually the result of dropping your Geek Bar Pulse on a hard surface. Blow firmly into the mouthpiece to reactivate the internal puff sensor and clear the airflow. If that doesn’t work, you may need to replace your device.^{[9]
X
Research source}
2
If the LED screen isn’t working, make sure your device is charged. If your device is charged and the screen isn’t working, check to see if the device still hits. If so, you can still use it. If not, it’s time for a replacement.
3
If your Geek Bar Pulse isn’t charging, check the port for dust or debris. If you plug the device in and the screen doesn’t respond, it isn’t charging. Grab a flashlight and check for any dust or debris. If you spot any, blow air into the port to clear out loose debris. For tougher spots, insert a shaved toothpick or another fine, non-metal tool into the port and use it to dislodge any foreign objects.^{[10]
X
Research source}
- Be gentle when using the toothpick. You don’t want to damage any internal components!

Section 7 of 7:

Frequently Asked Questions

Download Article

1
What flavors does the Geek Bar Pulse offer? The Geek Bar Pulse comes in 98 different flavors. The most popular include:
- Mexico Mango
- Sour Apple Ice
- Juicy Peach Ice
- Green Tea Ice
- Orange Creamsicle
- Coffee Tobacco
- Miami Mint
- Banana Taffy Freeze
- Banana Ice Cream
- Colombian Coffee Ice
- Pina Colada
2
What do the lights on my Geek Bar Pulse mean? The lights on your Geek Bar Plus have many different meanings:^{[11]
X
Research source}
- If your device is flashing red, it either has a low battery or connection issues or is in safety mode to avoid overheating or other damage.
- If your device is flashing red when charging, the battery is leaking or your charger is messed up.
- The green cascading light means that your Geek Bar Pulse is in standard mode.
- The red cascading light means that your Geek Bar Pulse is in Pulse Mode.
- Solid green light around your Geek Bar Plus means that it is fully charged.
- Solid red light around your Geek Bar Plus means that it has a low battery and needs to be charged as soon as possible.
3
How long does a Geek Bar Pulse last? A Geek Bar Pulse lasts for weeks or months, depending on the setting and how often you vape. Once your device displays zero e-liquid, you may get 4-5 days of use before it begins to taste burnt.^{[12]
X
Research source}
- Pulse Mode will drain your e-liquid faster than standard mode.
4
How do I properly dispose of a Geek Bar Pulse? The safest option is a Household Hazardous Waste Collection Facility, which safely disposes of hazardous household waste, usually at no cost. You can also check to see if your vape store accepts old vapes. If so, return it to the store. Stores like Home Depot and Best Buy often have battery bins for old batteries, so try there, too.^{[13]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

The Geek Bar Pulse is unauthorized for sale in the United States.^{[14]
X
Trustworthy Source

US Food and Drug Administration
U.S. government agency responsible for promoting public health

Go to source}

Thanks
Helpful 0 Not Helpful 0
In the United States, vaping is illegal for anyone under the age of 21.

Thanks
Helpful 0 Not Helpful 0