PDF download Download Article PDF download Download Article

Getting from red hair to blonde or platinum can take some work, but with patience you can definitely do it at home. A stylist is always a safe option to try too, but if you're looking to DIY your hair coloring, you've come to the right place! You’ll need to strip out any dye still in your hair and then bleach it to get that platinum-blonde look. You might have to do several rounds of bleaching, but don't stress. We'll walk you through everything you need to know!

Part 1
Part 1 of 3:

Bleaching Your Hair

PDF download Download Article
  1. The first step to changing from red to blonde hair is bleaching it, which can cause significant damage.[1] The best way to protect your hair is to condition it in the weeks before you want to change your hair color.[2]
    • If you’ve never bleached your hair before, consider going to a salon instead. If you make a mistake during the bleaching process, it can create lasting damage.
  2. If your red hair is the result of hair dye, you’ll need to remove the dye before you can get to blonde. You can purchase color removers from most beauty supply stores.[3] Follow the directions for applying and rinsing out the dye in your hair.
    • Depending on how long your hair is and how recently you’ve dyed it, you might need to use more than 1 cycle of the color remover to completely get the color out of your hair. Quite a bit of the remover comes in 1 box, so you might be able to get more than 1 cycle out of the box.
    Advertisement
  3. Developer is a creamy substance that lifts that cuticle of your hair to allow the bleach to get into your hair shaft. It's best to talk to a professional about which developer is best for your hair, but a developer that is 30-volume or lower is best. A higher number can cause significant damage to your hair.[4]
    • If your hair is a light strawberry blonde, you can use a 10-volume developer. It will lighten your hair about 1 shade, which should be just enough to take you from red to blonde.
    • The most commonly used developer is 20-volume developer.[5] It will only lighten your hair to 1 or 2 levels from your current shade, so use this only if you have a dark strawberry blonde or light copper hair.
    • A 30-volume developer is best if your hair is between light copper and dark red. It can lighten your hair more than 3 shades. However, if you hair is a very, very dark red, you might need to use a 30-volume developer in more than 1 round of bleaching.
    • The strongest developer available is 40-volume developer, and can cause serious damage to your hair if it's not used properly. If you feel the need to use a 40-volume developer, it's probably best to ask a professional to apply it to your hair.
  4. You can purchase hair bleach powder from most beauty supply stores. The bleach and developer containers will have instructions for how much of each you should mix together. Mix them together until they have a yogurt-like consistency.[6]
  5. Part your hair straight down the middle from your forehead to the nape of your neck. Then, part your hair across from ear to ear. This will give you 4 distinct sections. The handle of a rat-tail comb works well for parting your hair. Use plastic clips to secure 3 of the sections, and leave the other section down to begin bleaching.
  6. Dip a tint or dye brush into the bleach mixture up to about 1 in (2.5 cm). Gently brush the bleach onto your hair at your part, getting as close to the roots as possible and continuing down to the ends.[7]
    • You can purchase gloves from a beauty supply store. You should also put a hair cape or towel around your shoulders to protect your clothing, and a towel down on the floor or sink near where you're doing your hair.
  7. Once you've applied bleach to your part, continue parting your hair at 0.5 to 1 in (1.3 to 2.5 cm) horizontal intervals. As you finish each section, flip the already bleached hair up and over your head. continuing to brush bleach onto each section below.[8]
    • Continue until the first section is done, then unclip the second section and bleach it. Repeat on the remaining 2 sections until all your hair is bleached.
    • Make sure you brush bleach onto the top and underside of each section of hair you part.
  8. Once you’ve applied bleach to your whole head, let it sit for between 30 and 45 minutes. Keep an eye on your hair – once it’s a very light yellow color, you’re good to go![9]
    • If your hair is a dark red, you won’t get a light yellow on your first try. Leave the bleach on your hair for 45 minutes and then rinse it out. You should wait at least 3 weeks between each bleaching. Otherwise, your hair could become so damaged it falls out.
    • If you don’t have the patience to wait for multiple rounds of bleaching at home, you should see a salon professional.
  9. Once your hair has turned a bright yellow color, you’ll need to rinse the bleach out. Use lukewarm water and rinse your hair until it runs clear. Then lightly shampoo your hair, using about half of your normal amount of shampoo.[10]
  10. Advertisement
Part 2
Part 2 of 3:

Applying Toner

PDF download Download Article
  1. Toner will turn your bleached hair platinum blonde and prevent it from becoming yellow or brassy. There are a lot of toner colors to choose from – anywhere from icy-white blonde to ash blonde – depending on what tone you want your platinum hair to be.
  2. For a toner, a 20-volume developer is best. The toner bottle will tell you exactly how much of each to mix together, but a 1 part toner to 2 parts developer ratio is generally best.
  3. [11] Because toner comes in a range of shades blonde – from honey to platinum blonde – the directions for applying it will vary. Section your hair the same way you did for applying bleach, starting at your part and then creating horizontal sections. Leave the toner on for as long as the instructions direct you to, up to 30 minutes, depending on the color.
  4. [12] Use lukewarm water and rinse your hair until the water runs clear. If you leave any toner in your hair, the color could continue to develop.
  5. Using toner to raise your blonde from brassy yellow to your color of choice can still damage your hair. If you want a gentler option, wash your hair with purple shampoo. Wash your hair with it and then leave it on for 5 to 10 minutes. That should take out any brassiness and leave platinum hair behind.
    • Use the purple shampoo every other time you wash your hair – it will help maintain the platinum color!
  6. Advertisement
Part 3
Part 3 of 3:

Maintaining Your Blonde Hair

PDF download Download Article
  1. Bleaching your hair can really damage it, but a hair mask can help restore some of the moisture. You can purchase hair masks from most beauty supply stores, or you can use warmed up olive oil and massage it into your scalp and hair roots.
  2. Shampoo strips your hair of its natural moisture and oils, so avoid using it too often after you’ve bleached your hair. Shampoo every 2 to 3 days.
    • If you really, really can’t wait to shampoo your hair, consider a spray-in dry shampoo to absorb some of your hair’s oils.
  3. Many hair care companies offer a range of products for color-treated hair, including shampoos, conditioners, and hair treatments. Swap out your regular hair care products for these types of products after you've bleached your hair. It will protect your hair and maintain your color.[13]
    • Some companies even offer products for bleached hair – if you can find an afford those types of products, they're best.
  4. Bleaching your hair will dry it out, so applying even more heat can do a lot of damage. Try not to use straighteners, blow dryers, or curling irons on bleached hair. If you absolutely have to, use a heat protectant spray first.[14]
  5. Depending on the shade of blonde you want to maintain, you’ll need to re-tone your hair every 2 to 8 weeks. This will prevent your hair from reverting to a brassy blonde. When you hair starts to look brassy or yellow, it’s time to re-tone!
  6. Bleached hair can easily begin to turn green when exposed to chlorine. If you can, avoid chlorinated water like pools. If you can't avoid chlorinated water, use a protectant spray designed to prevent blonde hair from turning green. Or, coat your tresses with a leave-in conditioner before swimming so your hair doesn’t absorb the chlorine. You can find those products in most beauty supply stores.[15]
    • Alternatively, you could wear a swim cap to protect your hair.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    I dyed my hair a deep purple about 6 months ago. It has pretty much faded to a red tint but I want to dye it dark blonde. Will I have a problem doing this?
    Ashley Adams
    Ashley Adams
    Professional Hair Stylist
    Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.
    Ashley Adams
    Professional Hair Stylist
    Expert Answer
    Yes, you will have a problem achieving dark blonde if you attempt to put the color on your already colored hair, because color doesn't lift color. You will need to use a color remover/bleach kit to get rid of the purple/red color that is currently on your hair. After that color has been lifted, your hair should be light enough to proceed with the dark blonde toner.
  • Question
    How can I get light, medium, and dark blonde hair?
    Ashley Adams
    Ashley Adams
    Professional Hair Stylist
    Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016.
    Ashley Adams
    Professional Hair Stylist
    Expert Answer
    It would be a process to dye your hair 3 different shades. First, determine the level of your natural hair color. If you are between a level 6-7, you can keep your hair as the dark blonde shade, and then purchase 2 dyes that are a lighter and medium shade of blonde.
  • Question
    Could I skip the stripping part if my hair is reddish?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    You only need to strip your hair if you've dyed your hair red previously. If you're a natural red head, you don't need to strip it first.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

Things You'll Need

  • Rubber gloves
  • Color corrector
  • Powder bleach
  • 30-volume developer
  • 20-volume developer
  • Toner in your choice of color

You Might Also Like

Advertisement

References

  1. Brianna Bowling. Hair Stylist. Expert Interview. 25 February 2022.
  2. http://people.com/style/mistakes-dying-hair-blonde/
  3. Brianna Bowling. Hair Stylist. Expert Interview. 25 February 2022.
  4. https://www.youtube.com/watch?v=KGIuDeMDI8E
  5. Brianna Bowling. Hair Stylist. Expert Interview. 25 February 2022.
  6. https://www.youtube.com/watch?v=SZBAmwpiBpM
  7. http://www.refinery29.com/how-to-bleach-hair#slide-6
  8. http://www.refinery29.com/how-to-bleach-hair#slide-6
  9. http://www.refinery29.com/how-to-bleach-hair#slide-6

About This Article

Brianna Bowling
Co-authored by:
Hair Stylist
This article was co-authored by Brianna Bowling. Brianna Bowling is a Hair Stylist and the Co-Owner of The CRAFT Salon in Glendora, California. With more than 11 years of experience, she specializes in balayage, blonding, and vivid colors. Brianna has received years of in-depth training on advanced color techniques. This article has been viewed 285,464 times.
8 votes - 98%
Co-authors: 16
Updated: October 12, 2024
Views: 285,464
Categories: Dyeing Hair Blond
Article SummaryX

To get your red hair to blonde or platinum, you’ll need to bleach it to lighten the color, then tone it until it’s the shade of blonde you want. You can purchase bleach and developer from your local beauty supply store. If you have light red hair, you'll want a developer with a low volume, like 10. For dark red hair, you'll want a higher volume, like 20 or 30. Mix the bleach and developer together then apply it to your hair in small sections. When your hair has lightened, you'll need to rinse out the bleach with lukewarm water until the water runs clear. Then, you'll need to apply a toner that matches what you want your platinum hair to be. To learn how to maintain your new blonde hair, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 285,464 times.

Reader Success Stories

  • Kim Adams

    Kim Adams

    May 6, 2017

    "Very informative. I love it. It answered a lot of my questions!"
Share your story

Did this article help you?

Advertisement