How to Hang a Bike on the Wall

Co-authored by Peter Salerno and Kyle Hall

Last Updated: April 19, 2024 References

Storing your bike on the wall is a convenient way to save space and keep your bike safe from damage. To hang your bike on the wall securely, you’ll want to use a bike rack or a bike hook. After using a drill to properly install the mount for your bike, you'll have more free space and easy access to your bike whenever you're ready for a ride.

Method 1

Method 1 of 2:

Installing a Bike Rack

Download Article

1
Get a wall-mount bike rack online or at your local hardware store. Choose a vertical or horizontal wall mount depending on how you want your bike to be stored. A vertical bike rack is a good option if you're trying to conserve wall space. Choose a horizontal bike rack if you want your bike to hang flat against the wall.^{[1]
X
Research source} You can even build one if you want.
- You can find a wall-mount bike rack online here.
Measure the length of the bike if you're using a vertical bike rack, or the height of the bike if you're using a horizontal bike rack.

Advertisement
3
Hold the bike rack on the wall where you want the bike to hang. Don't put the rack up too high or the bike might touch the ceiling when it's hung up. Once you have the rack in position, mark where all of the screw holes on the rack line up with the wall. Most bike racks have two screw holes.^{[2]
X
Research source}
- If you’re using a horizontal rack, make sure the distance between the floor and the bike rack is greater than the height of the bike.
- If you’re using a vertical rack, make sure the distance between the floor and the bike rack is greater than the length of the bike.
4
Use a drill to drill into the wall at the points you marked. Make sure the holes you drill are deep enough that the whole length of the screws will fit in them. Use a drill bit that is slightly smaller than the screws that came with the bike rack. ^{[3]
X
Research source}
- You can find power drills online here.
- For example, if the bike rack came with 6mm screws, use a 5mm drill bit.
The wall plugs will give the screws you’re going to use to mount the bike rack something to grip onto. Use wall plugs that are the same size as the screws that came with the bike rack. You can find wall plugs at your local hardware store.^{[4]
X
Research source}
Use a screwdriver to screw the screws that came with the bike rack into the wall plugs. Continue turning the screwdriver until the screws won't turn anymore.
If you’re using a vertical bike rack, hang the bike by the front tire. If you’re using a horizontal bike rack, place the top tube of your bike frame on the rack.

Method 2

Method 2 of 2:

Using a Bike Hook

Download Article

1
Get a bike hook that can hold the weight of the bike. The packaging on the hook should say the maximum load capacity. Don't use a hook that's not meant to hold the weight of the bike or it could pull out of the wall.
- You can find bike hooks at your local hardware store or online here.
- Use a bathroom scale to figure out the weight of the bike if you're unsure. Weigh just yourself on the scale, and then weigh yourself on the scale while holding the bike. Subtract your weight from the weight of you plus the bike - the number you're left with is how much your bike weighs.
EXPERT TIP

"There are a lot of options for mounting your bike, but I prefer bike hooks. They're only a few dollars apiece, and they're simple to use."

Peter Salerno
Installation Expert
Peter Salerno is the owner of Hook it Up Installation, a professional installation company, which has been hanging art and other objects around Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.

Peter Salerno
Installation Expert
2
Use a stud finder to locate a stud in the wall. You can get a stud finder at your local hardware store. Place the stud finder on the wall and slowly move it across the wall until it indicates that a stud has been found. Usually stud finders light up or make a beeping sound when they’re over a stud. Read the instructions that came with your stud finder for specific directions on using it.
- You can find a stud finder online here.
Measure from the furthest tip of the front tire to the furthest tip of the back tire.
Make sure it's somewhere along the stud you found. Because the bike will be hung vertically, make sure the distance between the floor and the bike hook is greater than the length of the bike.^{[5]
X
Research source}
Make sure the hole is deep enough that the entire screw end of the bike hook can fit into it.^{[6]
X
Research source}
Insert the screw end of the bike hook into the hole and continue turning the hook clockwise until it won’t turn anymore. You want the hook itself to be parallel with the floor.^{[7]
X
Research source}
Place the front tire of the bike on the hook so that the tires are touching the wall and the seat of the bike is facing outward, away from the wall.

Grant Petersen, Bicycle Designer

To keep your bike safe and secure while saving space, consider mounting it on the wall. Strong anchors installed into studs can hold a bike horizontally. For lighter bikes, you can use specially designed hooks that grip the wheel rims.

Community Q&A

Search

Add New Question

Question

Why don't bike hanging websites feature ladies bikes as well as men's bikes?

Community Answer

Anymore, 'men's' bikes are considered the standard and 'women's' bikes are considered a frame option. Many women buy men's bikes because there are so many more options to chose from. So, they're just more common right now.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 37 Helpful 17
Question

I have a set of bike storage shelves from CB2. There is no problem with a road bike, but the handlebars on a hybrid are wide and I have to turn the front wheel. Is it okay with the front wheel turned? Will it cause damage?

Community Answer

There will be no damage to the bike with a wheel turned. Think about all the shock and abuse a bike takes during a quickly-paced ride on rough ground. The only thing to worry about is the rim brakes (if applicable). There needs to be some coating or rubber between the wheel and the hook. Other than that you are golden.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 3
Question

Why does it matter if the back wheel of the bike rests on the floor when hanging from the wall?

Community Answer

If the back wheel rests on the ground, the bike will not be completely stable. This makes it easy to knock the bike off the hook.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 6