This article was co-authored by Laila Ajani. Laila Ajani is a Fitness Trainer and founder of Push Personal Fitness, a personal training organization based in the San Francisco Bay Area. With over 13 years as a trainer and exercise specialist, Laila has expertise in competitive athletics (gymnastics, powerlifting, and tennis), personal training, distance running, and Olympic lifting. Laila is certified by the National Strength & Conditioning Association (NSCA), and USA Powerlifting (USAPL), and she is a Corrective Exercise Specialist (CES).
wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 80% of readers who voted found the article helpful, earning it our reader-approved status.
This article has been viewed 596,551 times.
A heavy bag is a piece of exercise equipment that helps build strength from arm and leg resistance training and provides an intense cardio workout.[1] You don't have to be a professional boxer or be a member of a gym to use a heavy bag. Heavy bags can be attached to the ceiling, wall, or to a stand, and can be successfully installed into your own home.
Steps
-
Decide where the bag will go. Think about the space in your home. Do you have a basement or work room? The amount of space you have will determine where you can put the bag.
- You can choose between a ceiling mount or a wall mount. For an optimal workout, most people suggest being able to move 360 degrees around the bag. This helps you work on footwork, movements, among other things.
- If the bag isn't in the middle of the room, it could potentially break something or rebound off the wall and come back at you, causing injury.
- Most people suggest mounting a heavy bag to the ceiling in a basement or garage.
-
Find a strong support beam. Support beams are narrow beams that run along the ceiling with spaces between. Generally, the space between support beams is 16", but they can be as wide as 24". Most people want to hang their bag from the ceiling for better mobility. When doing this, make sure you plan on attaching the heavy bag to a strong support beam. The beam must be able not only to take the weight of the heavy bag, but also the impact as it swings. One of the easiest ways to find a support beam is to use a stud finder.
- Another way to find the support beam is to use the knock test. Knock along your ceiling; if you hear a hollow sound, there's no support beam behind it. When you hit a support beam, the sound will change and no longer be hollow since you are knocking on a piece of wood.
- You can also measure from the wall to find the support beam. Place a tape measure against the edge of the wall and measure 16". Continue measuring in 16" increments until your desired placement. Knock against the wall to double check the placement of the support beam.
- Installing a heavy bag on the ceiling can cause serious damage to your house if done incorrectly. That is why it is so important to find a beam strong enough. Hanging the heavy bag on the rafters or ceiling joints can destroy the drywall.
- Overhead ceiling beams that are used to hold heavy bags should be able to support more weight than the bag.
Advertisement -
Drill a hole into the support beam. Place an eyebolt into this hole. Twist the eyebolt into the hole with your hand at first, and then tighten it with a wrench.
- Avoid using hooks instead of eyebolts, since heavy bags can easily fall off hooks.
-
Hang the bag. Attach the chains to the corners of the bag. They should be included with your heavy bag. An s-hook should also be included, which you should connect to the chains. Finally, attach the bag to the eyebolt.
-
Evaluate the security of the bag. Hit the bag a few times to make sure it is securely held in place. Rehang the bag if the attachments appear weak or fragile.
-
Purchase a mount. These range from inexpensive to very pricey. Most mounts come with all the nuts and bolts needed to install them. You can find mounts at sporting goods stores or online.
-
Find the 3 or 4 ceiling joists or support beams. You can find ceiling joists or support beams by using a stud finder. Make sure that you find ceiling joists in an area that allows movement. Your bag will be mounted on a middle joist.
- Joists are usually placed 16" apart. If you don't have a stud finder, you can use a measuring tape to measure from the edge of the wall, marking every 16". In some houses, the joists may run up to 24" apart. Use the knock test to double check. If you knock on the ceiling and hear a hollow sound, there is no joist. If the sound is not hollow, you are knocking against a ceiling joist.
- Choose a place in the ceiling where the joist meets with a cross beam if possible. You can center the mount to the crossbeam for added support.
-
Drill holes into the ceiling joists. Use a level to make sure that the holes you are drilling are straight across the joists. When you drill the holes, make sure to drill them into the center of the joist.
- You will need 3-inch wood screws. The threads on the screw need to catch and thread into the ceiling joist.
- Choose a drill bit so that the holes in the ceiling are sized so that the drilled hole is slightly larger than the shank of the wood screw, not the threads.
-
Attach a 2x6 hardwood board to the ceiling. This is going to be the base for the mount. The 2x6 should be long enough to span all the ceiling joists and support the screws. Attach the board to the ceiling using the newly drilled holes and wood screws. You want to connect the board to the ceiling at each joist.
- If you have a crossbeam, center the wood along the crossbeam. This will be where you will hang the bag.
- You can use a 2x4, but a 2x6 or higher will provide more support for your heavy bag.
-
Attach the mount to the hardwood board. Most mounts include all hardware needed to attach the mount to the ceiling. You may need a screwdriver, drill, or other tool to attach the mount. You should attach the legs of the mount in the center of the middle ceiling joist.
- Make sure to never install the mount into drywall.
- Try sticking a heavy bag chain or spring between the mount and the chains. This reduces vibration, and can possibly save your drywall.
-
Use a wall mount. If hanging a heavy bag from the ceiling worries you, try attaching it to the wall. Most athletic stores sell wall mounts that include all hardware needed to attach it to the wall. This method is only recommended for masonry walls. Otherwise, you might cause damage to your house.
- The bracket of a wall mount is screwed into the wall close to the ceiling.
-
Buy a free stand. If hanging a heavy bag from the ceiling or wall is impossible, there are many free stands available. Some even have wheels for added mobility. Free stands must be weighed down to prevent movement during use. Heavier bags usually require around 300 pounds of weight to prevent movement, although lighter bags may be held down with as little as 100 pounds.
- If you're using a free-standing rack, simply attach the chain on the heavy bag to the S-hook on the rack. No installation is required.
Community Q&A
-
QuestionI have a bag, it's about 4 feet in height. What should the distance be from the bottom of the bag to the floor when the bag is hung up?Community AnswerThis really depends on your height. The middle of the boxing bag should be in front of your chest, or a little lower.
-
QuestionWhich material is suitable for filling the punching bag?Community AnswerSand, ripped old clothes, shredded tires, and even mattress foam will work. You may also use a combination of these materials.
-
QuestionWhat do I do if my roof is concrete?Galasy4969Top AnswererUse a floor stand and put it on a hard surface. You could also use a floor bag, which uses a heavy base.
Video
Tips
Warnings
- Structural damage can occur if you install a heavy bag in your home. Make sure your house has the kinds of support needed for a heavy bag. Oversized timbers or diagonal bracing in the framework work best for ceiling mounts. If you don't have this, you may want to consider alternative ways to hang your heavy bag.Thanks
- Installing a ceiling heavy bag into your home can be very dangerous. You run the risk of the bag falling, which can cause injury to you from the bag and the chains.Thanks
About This Article
To hang a heavy bag, start by finding a strong support beam using a stud finder or by knocking on the ceiling and listening for a sound that’s less hollow than the areas on either side of it. Next, drill a hole into the beam where you want to place the bag, leaving plenty of room to move around on all sides of the bag. Then, twist an eyebolt into the hole and tighten it with a wrench. Finally, hang up the bag with an s-hook attached to the chains at the top. For tips on how to mount a heavy bag from a wall instead of the ceiling, read on!
Reader Success Stories
-
"Centering the bag in the room, and hanging the mount to a 2x4 helped. I'd still like to know the best height for different height of people so I could set it and leave it, but I'm sure there will always need to be some adjustments."..." more