How to Hook Up a Gas Stove

Co-authored by Homer Flores and Hunter Rising

Last Updated: March 19, 2024 References

Gas stoves are popular to use since they cook food faster and use less energy than electric stoves. Hooking up a gas stove is an easy task that you can do on your own with a few tools. Once you connect your stove to the gas line, check for any leaks so you can stay safe. When you're finished, you're ready to use your stove!

Installing a Gas Stove

Check the type of gas source in your home and buy the right connector.
Turn the gas valve off and apply pipe sealer to the stove’s threading.
Attach a regulator to the stove and put pipe sealer over the threading.
Use a wrench to screw a flexible gas line onto the stove.
Apply pipe sealer on the threads of the main gas pipe.
Screw on the flexible gas line and tighten the nuts on the main gas pipe.
Turn on the main gas pipe for the stove and test for gas leaks.

Part 1

Part 1 of 4:

Making Sure that You Can Use Gas

Download Article

1
Research your city's regulations related to natural gas. Many cities around the world have banned natural gas hookups and are phasing out existing natural gas lines. Cities have have or might already have done this include New York, Los Angeles, and San Francisco.
- If you can't use natural gas, you will still be able to use electric or induction.

Part 2

Part 2 of 4:

Checking Your Appliance and Work Area

Download Article

1
Get a gas stove that attaches to the gas source you have in your home. Your home will either use propane or natural gas, so your appliance needs to match the fuel. Before you buy your new appliance, check the gas source in your home so you can get the right type of stove. If you don’t currently have a gas line installed in your home, then you need to have one put in before you can run any gas stove.^{[1]
X
Research source}
- If you have one type of fuel in your home and you want to switch, then you need to have a professional install the gas lines for you.
- If you have the wrong type of appliance for your gas system, you may be able to have a technician convert it for you.
- Propane burns more efficient than natural gas and the emissions do not harm the environment.
2
Check that you have a 120-volt grounded outlet and range-quality gas valve. Electrical plugs for stoves have a 3-prong outlet adaptor, so the outlet you plug into must be grounded. Plug a circuit tester into the outlet where you plan on installing your stove to see if it’s grounded, and fix it yourself or hire an electrician if it’s not grounded. Then check the gas line to make sure that the gas line has a range-quality valve. If not, you may need to hire a technician to install one on the gas line for you.
- You can buy a circuit tester from your local hardware store.
Warning: Never try to remove the grounding prong from your stove since it could cause a fire hazard when you use your stove.
Clear any countertops nearby and make sure there isn’t anything on the floor around the area where you’re installing the stove. Sweep the area to clean any dust or dirt from the area so it isn’t as dirty under your new stove. Double check the width and depth of the space where you’re installing the stove to make sure your appliance fits, and make any adjustments that you need to.^{[2]
X
Research source}
4
Level the feet of your new stove so they sit on the ground flat. Have a helper assist you with tipping the stove backward and laying it on a towel so you can access the feet. Rotate the feet on the bottom of the stove counterclockwise to extend them further or clockwise to retract them. Loosen or tighten each of the legs by the same amount and tip it back up to test if it’s level. If the stove wobbles, adjust any feet that are too long or short until it’s sturdy.^{[3]
X
Research source}
- Your floor may not be perfectly level, so your stove may wobble even if all the feet are the same length.

Part 3

Part 3 of 4:

Attaching the Gas Line

Download Article

1
Check that the stove’s gas valve is in the off position. Locate the gas valve for your stove on a pipe near your floor behind your old stove or where you plan on installing a new one. The valve should already be off, but confirm that it’s turned perpendicular to the pipe so there isn’t a natural gas leak. Once the gas is off, you can continue working.^{[4]
X
Research source}
- Don’t work on your stove while the gas is still on because it’s unsafe to breathe and is extremely flammable.
- If you come into a strong smell of natural gas, turn off the valve and leave your home before calling emergency services. Do not use any electronics or items that create a spark.
2
Apply pipe sealer to the threading on the stove. Get a pipe sealer that’s made to use for gas lines; otherwise, the gas will leak through the seam. Use the brush on the cap of the pipe sealer to apply a thin layer to the threaded section on your stove, which is usually located near the bottom corner. Make sure you create a complete seal around the threading so the gas can’t escape.^{[5]
X
Research source}
- You can buy gas pipe sealers at hardware stores.
- You can also use pipe sealing tape if you have it. Wrap the tape around the threading 2-3 times to form the seal.
3
Attach a regulator to the stove if it doesn’t already have one. A regulator is a box-shaped piece of pipe that controls the pressure of the gas entering your stove. While most stoves come with a regulator built in, you may have to attach one to some models. Buy a regulator that matches the brand and output of your stove and screw it onto the pipe threading you applied the sealer to. Spin the nut on the regulator clockwise until it’s hand-tight, and then use a wrench to tighten it as far as you can.^{[6]
X
Research source}
- You can buy stove regulators at appliance stores or online.
Tip: If it’s difficult to attach the regulator directly to your stove, you can connect an elbow pipe first so you have more space for the regulator. Just be sure to seal the elbow pipe before attaching the regulator so it doesn’t leak.
4
Seal the threading on the regulator with the pipe sealer. Dip the brush back into the gas pipe sealer and rub it around the threading on the end of the regulator. Make sure you make a complete seal or else the gas could leak out from your pipes. Work within 5 minutes after you apply the sealer so it doesn’t dry before you attach it.^{[7]
X
Research source}
- Only use a sealer meant for gas pipes to prevent leaks.
5
Screw a flexible gas line onto the stove with a wrench. A flexible gas line is made of corrugated metal and can easily bend to fit into tight spaces. Make sure the flexible gas line has the same size threading on the end or else it will not fit your stove without an adaptor. Screw one end of the gas line onto the regulator’s threading by hand. When you can’t turn it anymore, hold the nut on the regulator in place with channel lock pliers and tighten the end of the gas line using a wrench.^{[8]
X
Research source}
- You can buy flexible gas lines from hardware or appliance stores.
- Don’t reuse an old flexible gas line since it may be more prone to leaking.
6
Put sealer on the threads of the main gas pipe before attaching the flexible line. Coat the threaded port on the main gas pipe with your pipe sealer so the gas doesn’t escape. Screw the flexible gas line clockwise by hand until you can’t turn it anymore. Grip the nut on the main gas pipe with channel lock pliers so it doesn’t move around, and use an adjustable wrench to tighten the flexible pipe more.^{[9]
X
Research source}
- Be careful not to overtighten the pipes since they could crack or get damaged.

Part 4

Part 4 of 4:

Testing Your Gas

Download Article

1
Combine dish soap and water in a spray bottle. Fill a small spray bottle with water from your sink and add a few drops of liquid dish soap. Shake the bottle so the soap mixes with the water and forms suds. Test spraying the bottle in your sink a few times to make sure it works before using it to check your pipes.^{[10]
X
Research source}
- You can also use a gas leak detection liquid if you want. You can buy the detection liquid from your local hardware store.
2
Turn the gas back on for your stove. Find the valve on the main gas pipe for your stove, which should be perpendicular to the pipes and in the off position. Rotate the valve so it’s parallel to the pipes so the gas is on. This allows the gas into the flexible line and stove so you can check the seals between the pipes.^{[11]
X
Research source}
- If you can smell natural gas after you turn on the gas, then immediately turn it off and reseal the gas lines.
3
Spray the soapy water onto the gas line connections to your stove. Hold the spray bottle as close to the connections you sealed and spray some of the soapy water onto them. Make sure you apply the soapy water all the way around the pipe so it’s completely wet. If there’s a gas leak, the soapy water will start to bubble around the connections so you know that there’s a small leak. Check each of the connections you made and mark any of them that are leaking.^{[12]
X
Research source}
- If the soapy water doesn’t bubble, then you don’t need to make any changes.
Hold the nut on the main gas pipe in place with your channel lock pliers and then use a wrench to tighten the flexible line. Screw it on until you can’t get it any tighter. Repeat the process for any other connections that were bubbling after you applied the soapy water. When you’re finished, spray more soapy water onto the connection to check it again.^{[13]
X
Research source}

Tip: If the pipes are still leaking after you tighten them, then you may need to reapply the sealer to the threadings.
5
Push the stove into place so it fits in the space. Carefully slide the stove into the space where you plan on installing it. Continue pushing it back until the front of the stove is in line or slightly extends out from the front of your counter and cabinets. Use a level on top of the stove to ensure that it still sits flat, and adjust any feet as you need to.^{[14]
X
Research source}
- Ask a helper to assist you so you don’t damage your floors by accident.
6
Turn on each burner individually to test them. One by one, turn each burner on your stove onto high until you hear the igniter clicking. The igniter will take about 4 seconds before the flame starts, but it may take slightly longer the first time you turn it on. Once the flame starts, turn the burner to low to ensure the gas flow adjusts properly. Turn the burner off when you’re done testing it before moving onto the next one.^{[15]
X
Research source}
- If the burners do not work, then you may need to check your gas supply line again to see if the valve is turned on. If it is, then you may need to contact a technician to check your stove for you.

Expert Q&A

Search

Add New Question

Question

Are there any other ways I can test the stove after I install it?

Homer Flores
Appliance Repair Specialist
Homer Flores is an Appliance Repair Specialist and Training Manager at PreFix, a home maintenance company out of Austin, Texas. With over 15 years of experience, Homer specializes in home improvement, remodeling, and construction. Homer’s dedication to the PreFix mission of providing hassle-free one-stop-shop service for home care, in addition to their completion of the Capital Factory and Techstars Accelerators, has contributed to their growth of service to over 50 zip codes throughout the greater Austin area.

Homer Flores

Appliance Repair Specialist

Expert Answer

You can purchase an inexpensive gas tester from the local hardware store to test the connections after install.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 5
Question

How can you light the burner using a lighter?

Aasim

Top Answerer

Make sure that your lighter is long as you do not want your fingers near the gas. Turn on the lighter, then slowly yet carefully turn on the gas. After you have ignition you can then adjust the heat as desired. Do not leave the stove on if there is no flame as that can quickly turn into a dangerous situation.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 0
Question

What kind of ventilation do I need?

Aasim

Top Answerer

Since the burning of gas creates toxic byproducts, you should have a range hood over the stove to pull them outside.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 0

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Natural gas is being phased out in many cities around the world due to the dangerous amounts of nitrogen dioxide they produce while burning and due to the effects of burning natural gas on the environment.

Thanks
Helpful 0 Not Helpful 1
Make sure your pipes aren’t leaking any gas since it’s harmful to breathe and extremely flammable.

Thanks
Helpful 1 Not Helpful 0
You cannot hook up a gas stove up in place of an electric stove unless you have a gas line installed in your home first.

Thanks
Helpful 1 Not Helpful 0
If you don’t feel comfortable hooking up your gas stove on your own, then call a professional installer to do it for you.

Thanks
Helpful 1 Not Helpful 0