PDF download Download Article
Learn to tell a queen bee vs a worker bee
PDF download Download Article

A queen bee is the leader of a bee colony and the mother of most -- if not all -- of its worker and drone bees. A healthy queen is necessary to the health of the hive; when she gets old or dies, the hive will die too if it can’t get a new queen in time. To maintain their hives, beekeepers must know how to distinguish a queen bee from the others and mark it once it is identified. Learn how to identify and mark your queen by looking for differences in behavior, location, and physical characteristics.

What does a queen bee look like?=

Look for the biggest bee in the hive, which is almost always the queen. The queen also has a pointed abdomen, a barbless stinger, and stands with splayed legs. The queen may hang out near larvae, or be in the center of crowds and clusters of other bees.

Method 1
Method 1 of 4:

Identifying by Sight

PDF download Download Article
  1. The queen bee will almost always be the largest bee in the colony. Sometimes drones can be as big or even bigger than the queen, but you can tell them apart by thickness. The queen bee will be longer and narrower than any of the other bees.[1]
  2. A bee’s abdomen is the lower part of its body, near the stinger. Honeybees have blunt abdomens, but the queen’s abdomen will have a more pointed shape. You can easily tell the queen apart this way.[2]
    Advertisement
  3. Worker and drone bees have legs that are directly under their bodies--you won’t be able to see much of their legs if you’re looking at them from the top. The queen bee has legs that splay outward, making them much more visible.[3]
  4. There is only one queen bee per hive. If you find more than one bee that might be the queen, gently lift each bee up by its thorax (the middle of its body). Hold them under a magnifying glass and inspect its stinger. Workers, drones, and virgin queens will have barbs on their stingers. The queen bee’s stinger is smooth and un-barbed.[4]
  5. Advertisement
Method 2
Method 2 of 4:

Looking in the Right Places

PDF download Download Article
  1. Gently remove each hive frame and look for larvae. They look like small white grubs, and you’ll usually see them in piles next to each other. Since the queen lays all the eggs in the colony, she’ll most likely be nearby.
    • Be very careful lifting and replacing the hive frames. You could inadvertently kill the queen.
  2. The queen bee will not be hanging out on the edge of the hive or outside. She’ll most likely be deep inside the hive, away from outside disturbances. If you have a vertical hive box, she’ll probably be on one of the bottom frames. If your hive is horizontal, look for her towards the center.
  3. The queen may move around within her hive. If you notice any unusual activity inside the hive, such as bees clustering together or larvae where you don’t usually see them, the queen may be nearby.[5]
  4. 4
    Start in the uppermost box (hive body) and work your way down. It is common for the queen to jump off a frame as you're pulling it out of the hive and go onto the frame below. When you're done looking in a box, place it on the ground and inspect the box below.
  5. Advertisement
Method 3
Method 3 of 4:

Identifying by Behavior

PDF download Download Article
  1. Workers and drones will always move out of the way when the queen is on the move. After she passes, they’ll cluster together where she was. Keep an eye out for bees moving out of the way.[6]
  2. The queen bee is fed by the rest of the hive and has no duties except for laying eggs. Keep an eye out for a bee that doesn’t seem to have a job. It’s probably the queen.
  3. The queen will have all her needs attended to by the rest of the hive. Look for bees showing attention and providing food for another bee. This may not be the queen--it could be a virgin queen or a young bee--but the odds are good that it’s her.[7]
  4. Advertisement
Method 4
Method 4 of 4:

Marking Your Queen

PDF download Download Article
  1. Beekeepers have designated colors to identify queens born in specific years. This helps you pick out the queen quickly, and to figure out if your hive will need a new queen soon. Be sure to choose the right paint color before marking your queen.[8]
    • Any acrylic-based paint is fine. Many beekeepers use model paint or even paint pens.
    • White paint is used for queens marked in years ending in 1 or 6.
    • If the year ends in 2 or 7, use yellow.
    • Use red for years ending in 3 or 8.
    • Green paint is used for years ending in 4 or 9.
    • Use blue for years ending in 5 or 0.
  2. Bees can get agitated or even injured if you hold them too long, so be sure your paint is ready for marking before you pick up the queen. Keep the paintbrush or paint pen dipped and ready to go in your other hand or on a small table next to the hive.[9]
  3. Gently pick up the queen by her wings or thorax. Be very, very careful when you pick her up--if she struggles, you can accidentally tear her wings or crush her.[10]
    • Some apiaries sell marking kits that let you confine the queen to a small plastic box during marking, but this isn’t a requirement.
  4. If you accidentally drop the queen, you’ll want her to fall back into the hive instead of in the grass or on your beekeeping suit. Keep the queen held over the hive the entire time you’re working with her.[11]
  5. Dab a small dot of paint on her thorax, immediately between her two front legs. Put on enough paint to make your mark visible, but don’t use too much--you could gum up her wings or legs with dried paint.[12]
  6. Some beekeepers prefer to clip the queen’s wings instead of marking her with paint, but this is optional. If you choose to do this, pick her up gently and trim the bottom quarter of both wings with a small set of beekeeping clippers.[13]
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the difference between a queen bee and a normal bee?
    Steve Downs
    Steve Downs
    Live Bee Removal Specialist
    Steve Downs is a Live Honey Bee Removal Specialist, Honey bee Preservationist, and the Owner of Beecasso Live Bee Removal Inc, a licensed bee removal and relocation business based in the Los Angeles, California metro area. Steve has over 20 years of humane bee capturing and bee removal experience for both commercial and residential locations. Working with beekeepers, agriculturalists, and bee hobbyists, Steve sets up bee hives throughout the Los Angeles area and promotes the survival of bees. He has a passion for honeybee preservation and has created his own Beecasso sanctuary where rescued bee hives are relocated and preserved.
    Steve Downs
    Live Bee Removal Specialist
    Expert Answer
    In order to spot the queen, wait until the honeycomb frame is in full sunlight. When the bees come out to warm themselves, you should be able easily to identify the queen, because she'll be the largest bee in the bunch.
  • Question
    How does it know there friend of there own colony
    Community Answer
    Community Answer
    Bees from the same colony emit the same pheromone, so they can tell by scent.
  • Question
    Why are there honey bees in my bird feeder?
    Carolyn Chadwick
    Carolyn Chadwick
    Community Answer
    I am not sure what your bird feeder looks like or what bird food it dispenses. Bees as well as nectar feeding birds will be attracted to a nectar feeder ( usually a suspended bottle with some kind of drinking trough attached to open end). As the nectar content drops, it is replaced by air. This is not a problem for a bird size creature. A bee is small enough to get caught into the air currents pulling it in through the bottle opening. Placing a netting like material between the trough and the rest of the bottle will prevent bees being pulled into the remaining solution in the bottle. The netting is provided by some nectar feeder manufacturers, otherwise a piece of stocking will do.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

  • Never go without protection, especially if you are allergic to bee stings!
  • In addition to harvesting honey, try harvesting royal jelly for use as a supplement.
  • You don't have to see the queen when opening your hive. All you need to check for are signs of a healthy queen. This means that you're seeing eggs, larvae and capped brood.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

  • Always wear protective gear when working with bees.
  • If you mark your queen by clipping her wings, be sure to only clip the ends. If you clip too closely, the workers might think she is injured and kill her.
Advertisement

About This Article

Steve Downs
Co-authored by:
Live Bee Removal Specialist
This article was co-authored by Steve Downs. Steve Downs is a Live Honey Bee Removal Specialist, Honey bee Preservationist, and the Owner of Beecasso Live Bee Removal Inc, a licensed bee removal and relocation business based in the Los Angeles, California metro area. Steve has over 20 years of humane bee capturing and bee removal experience for both commercial and residential locations. Working with beekeepers, agriculturalists, and bee hobbyists, Steve sets up bee hives throughout the Los Angeles area and promotes the survival of bees. He has a passion for honeybee preservation and has created his own Beecasso sanctuary where rescued bee hives are relocated and preserved. This article has been viewed 539,507 times.
58 votes - 92%
Co-authors: 31
Updated: December 6, 2024
Views: 539,507
Categories: Bugs | Beekeeping
Article SummaryX

To identify a queen bee, look for the largest bee in the colony as the queen will be longer and narrower than the other bees. Also, note that the queen’s abdomen has a pointed shape while the other bees have a blunt abdomen. Additionally, while the other bees stand with their legs under them, the queen stands with splayed, visible legs. Location can also help you identify the queen bee. She’ll typically be near the larvae since she lays all the eggs for the colony. To learn how to mark your queen, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 539,507 times.

Reader Success Stories

  • Margaret Gaughan

    Margaret Gaughan

    Dec 13, 2018

    "I teach children about bees, and this is the very best demonstration ever. To visualize the activity of the working..." more
Share your story

Did this article help you?

Advertisement