How to Knit a Flower

Co-authored by Jen Webber and Jessica Gibson

Last Updated: November 15, 2024 References

If you want to give someone a long-lasting blossom or create applique for another project, knit a flower. To make a flat blossom, knit in the stockinette stitch and bind off part of the work to create distinctive petals. Thread the yarn through the stitches and pull tightly so the blossom gathers in the center. If you'd like a rosette that stands taller, garter stitch a rectangle of fabric. Then wrap the fabric around the middle and sew to create a rosette that will hold its shape.

Method 1

Method 1 of 2:

Making a Flat Blossom

Download Article

1
Select a light yarn in any color and size 6 US (4.0 mm) needles. Determine what color yarn you want to make the blossom; think about what colors look nice together. Choose a yarn that's light worsted weight. You'll also need to get out a pair of single pointed needles.^{[1]
X
Research source}
- Light worsted weight is sometimes labled as #3 weight.
2
Cast on 51 stitches. Make a slipknot using the yarn you chose and slide it onto one of your needles. Hold the needle in your non-dominant hand. Then cast on 51 stitches to make the foundation of your blossom.^{[2]
X
Research source}
- This will make a blossom that's 3 inches (7.6 cm) in diameter. If you'd like to make a blossom that's smaller or larger, cast on a multiple of 10 stitches plus 1.
Advertisement
3
Make 4 rows of stockinette stitch. To knit the 4 rows in this pattern, you'll need to knit every stitch for the first row. Then purl every stitch for the second row. Knit every stitch of the third row and finish by purling every stitch for the fourth row. The pattern will look like this:^{[3]
X
Research source}
- 1: Knit all
- 2: Purl all
- 3: Knit all
- 4: Purl all
4
Knit 1 and bind off 9 stitches across row 5. To begin shaping the petals of the blossom, knit the first stitch of row 5. Then bind off the following 9 stitches. You should now see just 2 stitches on your left needle separated by a gap where you bound off the 9 stitches. Continue to K1, BO 9 across the row.^{[4]
X
Research source}
- Once you reach the end of the fifth row, you'll have 6 stitches on your needle with gaps in between. These will form the petals of your blossom.
Pull about 18 inches (46 cm) of the working yarn and cut it to make a long tail. Thread the tail through a tapestry needle and insert it through each of the loops on the needle. Slide the stitches off as you go.^{[5]
X
Research source}
6
Pull the yarn tail through the stitches to gather the blossom. Once you've sewn through each of the stitches and you don't have any more on your needle, pull all of the yarn tail until it begins to cinch the center of the flower together.^{[6]
X
Research source}
- The knitted piece should now be circular like a blossom. You should see a decorative center in the middle of the work.
7
Whipstitch the sides and petals. Ensure that the yarn tail is still threaded onto the tapestry needle and use it to sew the sides of the blossom together so they're flush. Then whipstitch between each petal down towards the center of the blossom. Remember to leave a long yarn tail once you finish so you can attach the blossom to another project.^{[7]
X
Research source}
- Pull on the yarn tail as you sew so the center of the blossom becomes secure.
- Whipstitching between the petals will create a distinctive blossom shape.
- If you'd like to decorate the blossom, sew a knit center or button onto the middle.

Method 2

Method 2 of 2:

Knitting a Ruffled Rosette

Download Article

1
Choose a light yarn in any color and size 7 US (4.5 mm) needles. Decide what color yarn you want to make the rosette and use yarn that's light worsted weight. You'll also need a pair of single pointed needles.^{[8]
X
Research source}
- You may see light worsted weight yarn labled as #3.
2
Cast on 70 stitches. Take your yarn and make a slipknot. Slide it onto one of your needles and hold the needle in your non-dominant hand. Cast on 51 stitches to make the foundation of your rosette.^{[9]
X
Research source}
- This will make a blossom that's 2 inches (5.1 cm) in diameter. For a smaller rose, cast on 50 to 60 stitches instead.
3
Knit 6 rows of garter stitch. To make the 6 rows in this pattern, you'll need to knit every stitch for each row. If you'd like to make the rosette taller, knit more than 6 rows. For a shorter rosette, knit 3 or 4 rows instead of 6.^{[10]
X
Research source}
- You should now have a thin rectangle of knit fabric on your needle.
4
Cut a 12 in (30 cm) tail and sew through the 70 stitches on your needle. Use sharp scissors to cut a long tail and thread it onto a tapestry needle. Insert the needle through each stitch on your knitting needle. Then slide the knitting needle out from the stitches.^{[11]
X
Research source}
- By sewing through the stitches, you won't need to bind them off individually.
5
Wrap and shape the knitted piece into a rosette. Hold one end of the knit fabric and use your other hand to twist the rest of the rectangle around the center. This should give you a rough rosette shape.^{[12]
X
Research source}
- Keep holding the rosette with one hand since it's not secured yet.
6
Sew the bottom of the rosette in place. Keep the yarn tail threaded onto the tapestry needle and insert it into the bottom of the rosette. Whipstitch across the bottom of the rosette so it won't unfurl when you let go.^{[13]
X
Research source}
- Trim the end of the yarn tail if you plan on simply giving someone the rosette. If you plan on attaching it to another project, keep the yarn tail long so you can sew it onto the other fabric.

Expert Q&A

Search

Add New Question

Question

How do you knit a simple flower?

Jen Webber
Knitting Specialist
Jen Webber is a Knitting Specialist and the Manager of The Quarter Stitch, a crafting store based in the French Quarter of New Orleans, Louisiana. With over 17 years of knitting and crafting experience, Jen helps educate customers and the public on best knitting practices for their DIY projects.

Jen Webber

Knitting Specialist

Expert Answer

People usually crochet flowers, since crocheting is better than knitting for building structure. However, if you do want to knit them, keep in mind that you'll be knitting relatively small pieces, because you'll mostly knit the petals individually, then sew them together.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 7 Helpful 7
Question

Where do I get my knitting needles?

T. Chinsen

Top Answerer

Any store that carries yarn will carry knitting needles. All craft and fabric stores carry both the yarn and the needles. Ask for help in the store if you are not sure what to purchase.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 11
Question

How do I make it smaller, like with only four petals?

Flutasmoradas

Community Answer

Use a smaller yarn and a smaller crochet hook for smaller stitches. Make the petals bigger.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 7

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

It may be simpler to crochet the flowers, rather than knitting them, because knitting tends to drape more, whereas crocheting is good for building structure.^{[14]
X
Expert Source

Jen Webber
Knitting Specialist

Expert Interview. 4 August 2020.}

Thanks
Helpful 0 Not Helpful 0
To help your blossom lay flat, wet-block it once you finish. Simply get it wet, lay it flat, and pin it in place so it dries flat.

Thanks
Helpful 2 Not Helpful 0
Binding off and casting off are the same thing. You may see it abbreviated as BO.

Thanks
Helpful 2 Not Helpful 0