PDF download Download Article PDF download Download Article

Making ceramics is a fun and interesting hobby for people of all ages and abilities. Once you know the basics, you'll be able to start creating your own pieces at home. Depending on the type of clay you use, you may need to use a kiln to make sure your ceramics are safe to use. No matter which techniques you prefer, it’s surprisingly easy to learn how to make beautiful masterpieces!

Method 1
Method 1 of 3:

Handbuilding a Dish

PDF download Download Article
  1. For a hand-built project, it’s best to use standard clay that must be fired in a kiln to set the material. Select a natural color, such as gray or brown, and purchase a small amount at first to ensure that it suits your needs. This is ideal for small projects, since your leftover clay will be less likely to dry out.
    • If it’s your first time using clay or if you don’t have access to a kiln, opt for air-dry, oven-baked, or polymer clay. These will allow you to finish your project at home.
  2. For a small dish, such as a ring dish or a small plate, roll the clay into a walnut-sized ball. For larger items, like a dinner plate or salad dish, start with a baseball-sized ball. Remember, you can always remove excess clay, but it’s difficult to add more once you’ve shaped your piece.
    • If you’re pulling a piece from a big block of clay, it may be helpful to use a strand of wire to cut off a piece of clay to work with.
    Advertisement
  3. Press your thumbs into the clay to warm it up, and pinch and pull on the material to soften it. It’s better to have the clay as soft and pliable as possible. Then, shape the soft clay back into a ball, and use a rolling pin to flatten it out into a sheet.
    • You can make the clay as thin as 18 in (0.32 cm) thick, but if the clay is too thin, it will become hard to work with.
  4. Watermark wikiHow to Make Ceramics
    Cut the sheet of clay into your desired shape using a pointed knife or specialized clay cutting tool. Some ideas include a circular, square, or abstract shape. Then, use your hands to smooth the corners and edges. If you want to make a standard-sized dinner plate, use a plate that you already own as a guide for the shape and size.

    Tip: If you’re having trouble smoothing the edges of your piece, dip your fingers into a glass of water and run them along the clay to get a smooth finish.

  5. As you’re working with the clay, feel for areas where there may be air trapped inside of the clay, and poke the spot gently with a needle to release the air. Then, smooth the area with your fingers and a bit of water before allowing the clay to dry.
    • Air bubbles can easily cause the pottery to crack or even explode in the kiln, so it’s important to remove them before firing and glazing!
  6. Advertisement
Method 2
Method 2 of 3:

Using a Pottery Wheel

PDF download Download Article
  1. Choose a standard wet clay in a natural color, and opt for an electric pottery wheel for your first projects, since they tend to be easier to control and use. If you’re starting with a large block of clay, break off and weigh your clay before starting your piece. This is the standard amount to begin with, since working with too much clay can be very difficult for a beginner.[1]
    • Be sure to read the package instructions before working with the clay, since specific brands normally have different requirements for drying and firing clay.
    • Once you get more experience with using the pottery wheel, you can use more clay to build larger projects.
  2. Watermark wikiHow to Make Ceramics
    Pinch, pull, and roll the clay to remove air bubbles that can cause the clay to crack in the kiln. Then, use your hands to form a smooth cone shape, and press down on the point of the cone to make it more rounded. This will provide a firm, thick base for your item on the pottery wheel.[2]

    Warning: Air bubbles in the clay can cause the piece to crack or explode in the kiln, so be sure to knead the clay thoroughly to remove them before you begin working on the wheel.

  3. Make sure the wheel is off and completely dry. Position the clay cone so the rounded point is directly over the center of the wheel, and press down firmly to hold it in place. The clay should easily yield under the pressure if it is soft enough to work with.[3]
    • If the clay isn’t firmly planted on the wheel, it may slip and slide around as you’re trying to shape it.
    • If your clay seems hard, continue kneading it until it is soft and pliable.
  4. Watermark wikiHow to Make Ceramics
    Set the wheel to a low setting and use your hands to gently smooth and center the clay over the middle of the wheel. This will ensure that the piece is symmetrical over the base. Pay attention to how the clay moves when you reposition your hands, and make sure there are no bumps in the clay.[4]
    • Avoid turning the wheel up to a higher setting before wetting the clay. This can cause rough dents in the clay that are hard to work out.
  5. Watermark wikiHow to Make Ceramics
    Dip your hands into room-temperature water, and place them on the clay. Smooth around the outside of the clay and get a feel for the shape and weight of the clay. When you’re ready to begin the piece, push the clay forward with the palms of your hands, which is called a plow forward.[5]
    • Always keep a bowl or bucket of water close by when you’re working with clay on the wheel. If the clay dries out, it can become dented or rough, making it difficult to shape.
  6. Watermark wikiHow to Make Ceramics
    After plowing forward, increase the speed to a high setting. Pull the clay upward to make a vase or bowl, or press outward to create plates. As you’re working, keep your elbows tucked in near your body, and use your hands to steady the clay. Remember, each piece of pottery is unique, so there’s no one “right” way to make an item!
    • Common techniques for shaping the clay include “coning,” which means pulling the clay upward and using your hands to smooth the sides of the clay into a cone before flattening it.
    • If you want to make a bowl, cone the clay upward, and then press the clay downward until it’s a disc-like shape. Then, use your thumbs to press a hole into the center of the bowl, and pull the hole outward with your fingers and thumbs as the wheel spins. This will create an opening in the center of the clay along with thick, sturdy walls.
  7. Watermark wikiHow to Make Ceramics
    Scrape away as much clay as possible from around the bottom of the piece. Then, turn the wheel off and wait until it stops turning. Once the piece is stationary, drag a strand of thin wire under the base and lift the piece off of the wheel.
    • It may be helpful to have someone else cut the piece away from the wheel as you lift it up to prevent the piece from becoming stuck.
    • Make sure the wire is as close as possible to the wheel to avoid cutting a slanted base!
  8. Advertisement
Method 3
Method 3 of 3:

Adding Finishing Touches and Glazes

PDF download Download Article
  1. If you want your piece to have additional texture, add it while the clay is still soft for the best effect. Use items like leaves, needles, or rubber stamps for a variety of different textures. Always be gentle when using tools and stamps, as it can be easy to puncture or dent the clay.
    • If you happen to make a stamp or mark you don’t like, simply dip your fingers in water and gently rub them over the area until the mark is smooth.

    Adding Texture

    Stamps: Purchase rubber stamps from the craft store, and press them against the clay firmly to make markings. These are ideal for creating a repeating pattern or a “signature” marking on an item.

    Tools: Select household items, like forks, knitting needles, or combs. Press them against the soft clay, or gently drag them across the surface to create an interesting, geometric or rough texture.

    Imprints: Choose natural items, like leaves, twigs, and stones, and press them against the soft clay. This will leave a faint, delicate imprint of the texture of the item on the clay before you fire it.

  2. If your piece is made of air-dry clay, be sure to check the directions to find out how long you should let the piece dry before handling it. For clay that needs to be fired in a kiln, make sure the clay is dry to the touch, which can take 12-24 hours, depending on the clay that you used and the size of the project. Then, carefully transport the piece to the kiln.
    • For air-dry clay, you can use a fine grain sandpaper, such as an 80- or 120-grit, to remove small imperfections and smooth the surface before adding paint.
  3. Paint air-dry clay with an acrylic or latex paint if you want to add color. Select a paint that is safe for use on clay and that doesn’t require firing in a kiln, since air-dry clay can’t withstand high temperatures. Apply the paint using brushes, sponges, or other techniques, and then let it air dry according to the directions on the paint.
    • If you plan to use the pottery for eating or drinking, opt for a food-safe paint and apply a food-grade sealant all over the piece after the paint is completely dry.
  4. Locate a kiln at a local community center, art space, or library, and schedule a time to fire your piece. Carefully lower the item into the kiln, and close the lid. Make sure the kiln is set to the correct temperature for “bisque” firing, which is the first stage of firing the pottery. When it’s finished, carefully remove the item from the kiln to add a glaze.[6]
    • If you’re not sure what that temperature should be, check the directions on the clay packaging. If you don’t have the packaging, research the type of clay you’re using to find the ideal firing temperature.
  5. Dip the item into the glaze, or paint the glaze onto the newly-fired piece. If you want to add multicolor designs, use brushes or sponges to apply the glazes in an abstract design, since they will sometimes blend and run together in the kiln. If you prefer the natural color of the clay, apply a clear glaze for extra protection.[7]
    • Keep in mind that the color of the glaze when it is applied can look different than when it is fired. Be sure to choose the glaze based on the fired color!
    • Avoid putting glaze on the bottom of the piece, since this can make it stick to the kiln.
  6. Transfer the item to the kiln by holding the base to avoid smudging the glaze. Check the glaze packaging and set the kiln to the correct temperature, which is normally lower than the bisque firing temperature. Make sure the item isn’t touching any other pottery in the kiln, and close the lid to start firing. Once it is finished, carefully remove the item from the kiln!
    • After it’s fired, you can safely touch and handle the item without affecting the glaze, since it should be completely cured and hardened.
    • If you’re not sure of the appropriate temperature, check online for temperature charts that list a variety of glazes.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What types of clay can I use if I don't have a kiln?
    Natasha Dikareva, MFA
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Natasha Dikareva is a San Francisco, California based sculptor, and installation artist. With over 25 years of ceramics, sculpting, and installation experience, Natasha also teaches a ceramic sculpture workshop titled "Adventures in Clay" covering concept development, hand-building techniques, texture, and glazing techniques. Her work has been featured in solo and group exhibitions at the Beatrice Wood Center for the Arts, Abrams Claghorn Gallery, Bloomington Center for the Arts, Maria Kravetz Gallery, and the American Museum of Ceramic Art. She has taught at the University of Minnesota and the American Indian OIC School. She has been awarded the Excellence Award at the 1st World Teapot Competition, Best in Show at the 4th Clay & Glass Biennial Competition, and a Grand Prize at the American Museum of Ceramic Art. Natasha holds an MFA from the University of Minnesota and a BFA from Kiev Fine Arts College.
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Expert Answer
    I don't use them personally, so I'm not entirely positive, but the plastic-based clays supposedly dry on their own. So the polymer clays or air dry clays will supposedly dry on their own without heat. Most of the pros use water-based clay though, which needs to be fired in a kiln at least once.
  • Question
    Can you make ceramics at home?
    Natasha Dikareva, MFA
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Natasha Dikareva is a San Francisco, California based sculptor, and installation artist. With over 25 years of ceramics, sculpting, and installation experience, Natasha also teaches a ceramic sculpture workshop titled "Adventures in Clay" covering concept development, hand-building techniques, texture, and glazing techniques. Her work has been featured in solo and group exhibitions at the Beatrice Wood Center for the Arts, Abrams Claghorn Gallery, Bloomington Center for the Arts, Maria Kravetz Gallery, and the American Museum of Ceramic Art. She has taught at the University of Minnesota and the American Indian OIC School. She has been awarded the Excellence Award at the 1st World Teapot Competition, Best in Show at the 4th Clay & Glass Biennial Competition, and a Grand Prize at the American Museum of Ceramic Art. Natasha holds an MFA from the University of Minnesota and a BFA from Kiev Fine Arts College.
    Natasha Dikareva, MFA
    Ceramics & Sculpting Instructor
    Expert Answer
    Absolutely! You're going to be a little limited in your options if you don't have a pottery wheel or a kiln, but you can you still sculpt things at home.
  • Question
    Can you make pottery without a kiln?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    If you’re making traditional clay pottery, you can fire it outdoors by creating a fire and stacking the pots on top, then covering the pottery with an insulating mound of natural materials such as tall grass and animal dung. You’ll need to leave openings around the bottom and at the top to let in air and let out smoke. Alternatively, you can use air dry clay, which doesn’t need to be fired at all.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!

Warnings

  • Always be careful and wear heat-resistant gloves when removing your pottery from the kiln. Clay retains heat and can easily burn you, causing you to drop and break your new piece of pottery!
Advertisement

Things You’ll Need

  • Clay
  • Rolling pin (optional)
  • Cutting tool
  • Pottery wheel (optional)
  • Kiln (optional)
  • Glaze (optional)

About This Article

Natasha Dikareva, MFA
Co-authored by:
Ceramics & Sculpting Instructor
This article was co-authored by Natasha Dikareva, MFA. Natasha Dikareva is a San Francisco, California based sculptor, and installation artist. With over 25 years of ceramics, sculpting, and installation experience, Natasha also teaches a ceramic sculpture workshop titled "Adventures in Clay" covering concept development, hand-building techniques, texture, and glazing techniques. Her work has been featured in solo and group exhibitions at the Beatrice Wood Center for the Arts, Abrams Claghorn Gallery, Bloomington Center for the Arts, Maria Kravetz Gallery, and the American Museum of Ceramic Art. She has taught at the University of Minnesota and the American Indian OIC School. She has been awarded the Excellence Award at the 1st World Teapot Competition, Best in Show at the 4th Clay & Glass Biennial Competition, and a Grand Prize at the American Museum of Ceramic Art. Natasha holds an MFA from the University of Minnesota and a BFA from Kiev Fine Arts College. This article has been viewed 424,143 times.
10 votes - 90%
Co-authors: 29
Updated: December 5, 2024
Views: 424,143
Article SummaryX

If you want to make ceramics by hand, choose a clay that you can bake in the oven or air-dry, unless you have access to a kiln. Pull off a small piece of clay to work with and roll it into a ball, then pinch, pull, and roll the clay to warm it up in your hands. Once it’s soft, roll the dough out so it’s about 1/4 inch thick, then use your hands to shape the clay. When you’re finished, run your fingers over the clay and use a needle to poke a hole in any air pockets, then dip your fingers in a little water and smooth out the area. For tips on how to make pottery on a pottery wheel, keep reading the article!

Did this summary help you?

Thanks to all authors for creating a page that has been read 424,143 times.

Reader Success Stories

  • Alexandra Hurtig

    Alexandra Hurtig

    Nov 6, 2019

    "I just started learning, and your writing has been of great help."
Share your story

Did this article help you?

Advertisement