How to Make a Hollow Book

Author Info

Last Updated: December 17, 2024 Approved

A hollow book can be a nifty way to hide something, whether it's a spare key, a secret note, or even money. Most people wouldn't think to browse your library for private or personal things. It's also a great way to pass something to someone discreetly--an unsuspecting onlooker will just think you're sharing a very good read!

Steps

Download Article

, preferably a thick one with a sturdy hardcover. (See 'tips' and 'warnings' first, about where to get an appropriate book and not to select a valuable/antique/currently popular/important book).
Select the first few pages that you want to have free at the end of the project (plus one more) and hold them to the front cover with plastic food wrap so they do not get messed up with the glue. These pages, except for the last one, will not be cut out. This will allow the book to look like a book when it is opened up and will cover the hole itself.

Advertisement
Make the consistency just enough for the glue to be runny, and more easily absorbed by the edge of the book's pages. 50% to 70% glue (30% to 50% water) or half a 35mm film canister full usually works well but use your judgment, given the thickness and size of the book. Alternatively, try a craft glue like Mod Podge.
Now that you have the top cover and the first couple of pages wrapped in food wrap, brush the three edges of the book with the glue solution so that it is reasonably absorbed. This will hold the book's pages together. Remember: clean the brush off immediately, or else it will harden and become useless for step 9.
Let the book dry for fifteen to thirty minutes.
. Draw a half-inch (1.2 cm) border within the edge, on all four sides (including the spine). Drill a hole in each corner of the newly drawn box to the depth you wish the hidden compartment to be. (This makes cutting out the pages easier because the blade does not have to make a 90-degree turn.) You may leave a few of the glued bottom pages uncut.
(a box cutter works especially well). Try to make the cut as vertical as possible, or else try to tilt it so the hole will narrow as you go down. Using a ruler, as shown in the image, can help a lot. Apply enough pressure to cut a few pages at a time or as many as you would like. A metal ruler is advisable.
. Do not rush this step, because the slower and more carefully you do this, the smoother and straighter the inside edges will be. Remove the bits of paper from the inside that accumulate from the cutting.
. The glue dries clear, so don't be concerned if it drips a little. While waiting, apply a second coat of glue to the outside edges of the pages.
. The saved page will be glued directly on top of the hole, essentially covering it (for now).
, this time without any spacers. Allow it to dry for about 15-30 minutes. In this drying phase, the saved page will become affixed to the hole, as mentioned in the previous step.
so that the hole is visible and accessible once again. You may want to add a magnet of some kind before glueing this page in. The insides of the book may still be moist because the book had been closed while drying. Now is a good time to let the book dry while it's open.
. Touch it with your fingers, and when you are certain it is dry, fill it with your treasured items, shut the book, and put it on the bookshelf. Only you will know that this book has a secret compartment!

Community Q&A

Search

Add New Question

Question

Will the edges of the paper feel different, giving it away if someone touched it?

Community Answer

They might. Try to keep it in a place where people are unlikely to touch it, like on a bookshelf filled with other books.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 82
Question

Where can you buy cheap old hardcover books?

Community Answer

Garage sales and used bookstores. Some libraries also have a bin of free books they're disposing of.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 110
Question

Can I use something other than a box cutter to cut the pages out?

Community Answer

Yes, but you'll need to be very careful with anything you choose. You could try scissors, but it would take a lot longer since you would have to cut the book in small sections. Make sure that anything you choose has a sharp blade.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 13 Helpful 61

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you are wondering, "What is the purpose of saving the last page to glue on top, and then cutting through it just like the others?" It's to cover up the lines you initially drew to cut out the compartment in the book. It also allows the book to be fully closed, compressing the pages while the inside dries. This is important so the book will close properly when it is finished.

Thanks
Helpful 27 Not Helpful 2
A Dremel tool makes quick work of 30-40 pages at a time, and sometimes the heat of the cutting disk burns the inside edges, leaving smooth brown lines on the inside. (See Warnings)

Thanks
Helpful 19 Not Helpful 1
You may be able to get free old books from libraries that are clearing out the archives. But don't use a book from your family's library - it might be a valuable antique, and someone could start looking for it.

Thanks
Helpful 12 Not Helpful 0

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Although the Dremel tool cuts quickly, you may accidentally cut through the back of the book. Also be advised that it will burn the pages, and the smoke may smell bad, depending on the type of paper the book is made from. The depth of the cut is also limited to the radius of the cutting wheel. You will need to remove pages between cuts to go deeper.

Thanks
Helpful 11 Not Helpful 0
Burning paper often contains dioxins, which are a potent carcinogen: Make sure you ventilate the room, perhaps blowing a fan across the book as you work to keep the dangerous fumes from your face.

Thanks
Helpful 10 Not Helpful 0
Hollow books are not effective against law enforcement.

Thanks
Helpful 29 Not Helpful 5
Try adding a closing mechanism to keep your book closed like a magnet, belt buckle, or button. Otherwise, everything that you place inside will just fall out!

Thanks
Helpful 9 Not Helpful 1
When choosing a book, make sure it is not a book that you care about and that someone will want to read again. Also, make sure that it is not a book anyone else might ask to look at because it will be hard to come up with an excuse as to why you won't let them read it.

Thanks
Helpful 7 Not Helpful 1
Cutting an old book can contain many old, foreign, possibly harmful contaminants found within the dust. The dust particles can sit for many years, contain bacteria, and chemicals. Depending on your method of cutting, you may find a little to a maximum of dust in the air. It is recommended that you cut in a well-ventilated area, use of an air vacuum with a HEPA filter is preferable, and most importantly you use a dust mask that can filter out the breathing of such dust particles. Eyeglasses can also be used to prevent dust from getting into the eyes, and protect from particles (ie: small rock, tiny metal particles from an old rusty pipe) that can shoot out from underneath a blade into the eye. Especially if using motorized tools, such as a Dremel. Dust will fill the air, so close all doors, to minimize the spreading of such dust particles.

Thanks
Helpful 9 Not Helpful 2