How to Make a Paper Hat

Co-authored by Renee Day

Last Updated: November 1, 2024 Fact Checked

VIDEO

Hats are a great way to add character and fun to a party, play, or dress-up game. Instead of buying hats from the store, however, consider making your own. It is a simple, fun project suitable for all ages. Once you know how to make a basic hat, the possibilities are endless!

Folding a Simple Paper Hat

Crease a rectangular sheet of paper lengthwise down the middle and fold it in half widthwise.
Rotate the paper so the folded edge is on top. Fold the top left and right corners to the vertical crease and fold 1 of the flaps along the bottom edge upwards.
Flip the paper over and fold the second flap up. Tape the corners of the brim to give your hat a nice finish.

Method 1

Method 1 of 3:

How to Make a Sailor or Alpine Hat

Download Article

1
Crease a rectangular sheet of paper down the middle. Fold the paper lengthwise (hotdog style). Run your fingernail along the crease, then unfold the paper. You will use this crease as a guide later on.^{[1]
X
Research source}
- A sheet of newspaper around 29 ¹⁄₂ by 23 ¹⁄₂ inches (75 by 60 cm) will work the best, but you can use a sheet of printer paper to make a smaller doll-sized hat too.
Bring the narrow ends together, then flatten the paper (hamburger style). Run your fingernail along the crease to sharpen it. Do not unfold the paper.^{[2]
X
Research source}

Advertisement
Rotate the paper so that the folded edge is along the top of the paper. Fold the top left and right corners to the vertical crease running down the middle of your paper. You will end up with a house shape.^{[3]
X
Research source}
There are 2 layers or "flaps" of paper along the bottom edge of your house shape. Take the top flap and fold it upwards. The new crease along the bottom edge of the paper should be flush with the bottom edges of the triangles.^{[4]
X
Research source}
5
Fold the brim inwards if it is too wide for you. Unfold the brim to reveal a crease. Fold the bottom edge up to this crease, then fold the brim back up, like in the previous step.^{[5]
X
Research source}
- How wide you make the brim is entirely up to you and your personal tastes. Most people like theirs between 1 and 2 inches (2.5 and 5.1 cm).
If you folded the brim twice earlier, you should fold it twice this time around too.^{[6]
X
Research source}
7
Tape the corners of the brim, if desired. You don't have to do this, but it will give your hat a nicer finish. Wrap pieces of tape around both of the side edges of the brim to hold them together. You can also use glue instead, but let the glue dry.
- To make an alpine hat, fold the corners of the brim down behind the band so that your hat looks like a triangle. Glue the edges of the brim to the hat.
For an alpine or Peter Pan look, wear the hat with the triangle parts over your ears. For a bicorn or pirate look, wear the hat with the triangle parts over your forehead instead.

Method 2

Method 2 of 3:

How to Make a Paper Cone Hat

Download Article

1
Choose paper that is twice as tall as the hat you want to make. For example, if you want your hat to be 12 inches (30 cm) tall, the paper should be at least 24 inches (61 cm) tall. Pick a color that works with the type of hat you are making. For example, pink would work well for a cone-shaped medieval princess hat while black would work for a witch hat.^{[7]
X
Research source}
- Construction paper and scrapbooking paper will work well for smaller hats. If you want to make something big, like a princess or witch hat, use poster paper instead.
2
Draw a semicircle on the paper. You can do this with a plate, compass, or a pencil tied to a piece of string. The circle needs to be twice as tall as you want the hat to be. For example, if you want a 12-inch (30-cm) tall princess hat, the circle should be 24 inches (61 cm) wide.^{[8]
X
Research source}
- Draw the circle along 1 of the edges of the paper. This way, the straight edge will be even.
If your paper is plain, now would be a great time to decorate it with paint, markers, stamps, or stickers. Do not put anything too bulky on the paper just yet. If you used paint, be sure to give it time to dry.
Curl the straight edges of the paper together until they meet, then overlap them until you get a cone. The more you overlap the edges, the narrower the cone will be. Once you are happy with the size, tape, staple, or glue the seam together.^{[9]
X
Research source}
5
Cut a brim and glue it on if you are making a witch's hat. Stand the cone up on a sheet of paper and trace around the base. Set the cone aside, and trace around the circle to make a wider brim. Cut the bigger circle out, then cut the smaller circle out. Tape or glue the brim to the bottom of your cone.
- Hot glue will work, but you can use tape as well--put the tape on the inside of the cone so that you can't see it on the outside.
- Skip this step if you are making a different kind of hat.
Cut an elastic long enough to wrap under your chin while you are wearing the hat, plus 2 inches (5.1 cm). Tie a knot in each end of the elastic, then staple it to the bottom of the hat. Place the knot above the staple.^{[10]
X
Research source}
7
Decorate your hat to give it more character. The possibilities are endless here. You can give your hat a different look just by gluing different items to it. Hot glue will work the best here, but you can use tacky glue instead if you have nothing else. Here are some ideas to get you started:
- Clown: paint polka dots on the hat, then hot glue a large pompom to the tip.
- Santa: glue a white pompom to the top of the hat, then more white pompoms around the brim.
- Party hat: cut a fringe from crepe paper, then glue it to the inside of your hat's brim. Hot glue a pompom to the top.^{[11]
  X
  Research source}
- Princess: add strips of tulle, crepe paper, or tissue paper to the tip. Hot glue a skinny white boa around the base.
- Witch: wrap a Halloween-colored ribbon around the base of the hat. Cut a buckle shape from paper, and glue it over the ribbon.
- Wizard: draw stars and moons using gold or silver glitter glue.
How long this takes depends on the type of glue you used. Hot glue dries within minutes, but tacky glue can take several hours. Once the glue is dry, your hat is ready to wear!

Method 3

Method 3 of 3:

How to Make a Paper Plate Hat

Download Article

Choose a thin paper plate that is around 10 to 12 inches (25 to 30 cm) and fold it in half. Make sure that the plate is blank on both sides. Avoid paper plates made from stiff cardboard.^{[12]
X
Research source}
2
Cut away the rim part way. Turn the plate so that the folded edge is running vertically. Start cutting at the top of the folded edge and stop cutting when you are 1 inch (2.5 cm) away from the bottom of the folded edge. Cut closer to the rim for a larger hat, and further from the brim for a smaller hat. Do not cut the entire center out.^{[13]
X
Research source}
- If you want to make a crown, cut the inside of the plate into wedges like a pizza. Start at the folded edge and stop inside the rim. Do not cut past the rim.
3
Draw a half-shape along the fold, starting at the 1-inch (2.5-cm) gap. Use a pencil to sketch out half of a shape along the fold, such as a semi-heart, semi-star, or semi-shamrock. Make sure that the bottom of your shape connects to the 1-inch (2.5-cm) gap.^{[14]
X
Research source}
- It is important that your shape connects to that 1-inch (2.5-cm) gap, or it will fall out.
- Skip this step if you are making a crown.
The extra material between the symmetrical shape and the rim of the plate will fall away. Discard this extra material.
5
Unfold the plate and decorate your hat. When you unfold your plate, you will be left with a ring shape that has a symmetrical shape in the middle. Decorate your hat as desired, then let it dry.^{[15]
X
Research source}
- Paint your hat with acrylic, poster, or tempera paint.
- Draw designs on it with glitter glue.
- Glue rhinestones or sequins to the hat for extra sparkle.
- Decorate the hat with other items, such as stickers, pompoms, or buttons.
Find the spot where your shape connects to the hat. Fold the shape along this gap upwards so that it stands straight up. If you made a crown, simply fold all of the triangles upwards until they stick up.^{[16]
X
Research source}
If the hat is too small, cut around the inside rim to make it bigger. If the hat is too big, cut the brim apart in the back. Overlap the 2 ends until the hat fits, then glue, tape, or staple them together.

Community Q&A

Search

Add New Question

Question

How do I measure my head size for the cap?

Edward Liu

Community Answer

Use a bendable ruler to measure your head, then measure your paper you are making the hat out of. Soft tape measures for sewing work great.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 48 Helpful 71
Question

Can you actually wear the cone hat? It looks so small.

Community Answer

Only if you punch holes and put in elastic to go under your chin and keep it on your head.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 49 Helpful 68
Question

Can we make this for a school project for us to wear?

Community Answer

Yes. It would make a nice school project.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 40 Helpful 66

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Tips

Use different colors and decorations to create hats for specific colors.

Thanks
Helpful 10 Not Helpful 6
Match the colors to the holiday or season, such as orange and black for Halloween.

Thanks
Helpful 5 Not Helpful 5

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.