How to Make a Pop up Book

Download Article

Author Info

Last Updated: May 30, 2024 Fact Checked

Download Article

Planning

|

Construction and Design

|

Assembly

|

Video

|

Q&A

|

Tips

|

Things You'll Need

Pop-up elements add an exciting new dimension to any book (sure wish textbooks had them). If you are looking for a craft to make for a young child you know (or anyone!), you can create your own pop-up book rather simply. All you need is a story, a couple of hours, and a few simple materials.

Part 1

Part 1 of 3:

Planning

Download Article

1
Choose an interesting topic. The subject of your pop-up book should be kid-friendly if you plan on giving the book to a child. But what adult doesn't love a good 3D story?
- It can either be fiction or non-fiction. If choosing fiction, you can either go with a short yet classic folk tale or you can write your own story. If choosing non-fiction, look for a subject that a child might find appealing, like space, dinosaurs, or animals.
- You don't need to think of this as a tried-and-true "book." It can double as a letter, proposal, or a thoughtful addition to any gift.
2
Keep things simple. Limit the number of pop-out elements you use to prevent your pages from looking cluttered or becoming too weak to stand. The fewer cuts you make in your pages, the more durable the pages will be.
- Feel free to add other craft elements to make it better. But even too many of these can make your pages look busy and weigh them down unnecessarily.
Advertisement
3
Plan the story out. Create a storyboard. Write the story or script out on notebook paper, separating it into different paragraphs or lines when you anticipate needing a new page. Sketch out a rough draft of the illustrations you want to use for each page.^{[1]
X
Research source}
- Before you actually create the book, it is important that you know how many pages you will need along with how many pictures you will need and where to put them.

Part 2

Part 2 of 3:

Construction and Design

Download Article

1
Fold a sturdy piece of paper in half. A 9-by-12-inch (23-by-30-cm) sheet of construction paper works well, but you can also use cardstock, thin poster paper, or scrap booking paper of just about any size.
- The paper must be thicker than an ordinary sheet of printer paper. Fold the paper in half horizontally to create the book's cover.^{[2]
  X
  Research source}
2
Cut two parallel, horizontal slits in the center of the paper. The slits should be about 2 inches (5 cm) long and spaced about 1 inch (2.5 cm) apart. These slits will create a tab.^{[3]
X
Research source}
- Open your paper. Position it vertically so that its height appears longer than its width. Use your finger or a thin pencil or pen to gently pry the tab forward.
3
Make your illustrations. You can either draw and color the illustrations on separate sheets of construction paper or cardstock, or you can cut pictures from photographs, magazines, or recycled picture books and paste those pictures onto sturdier cardstock.
- Make sure that the pictures you create or use roughly correspond to the size of your book page. Also make sure that you have all the characters and images you need for your entire book, rather than the single page.^{[4]
  X
  Research source}
- Set aside an empty space at the bottom of the page for text. If you plan on having a child write the story out, you may want to use a ruler to draw lines to make it easier for him or her. You could also glue a portion of lined notebook paper in the space.
  - If you plan on writing it out yourself, however, you can leave the space blank or print text out from your computer and paste it onto the page later.
4
Create as many pages as necessary. Use the same folding and cutting technique to create as many pages as you need to bring the tale to an end.
- Review your story. Make sure that you have the illustrations and pictures planned out accurately as well as the text. Also make sure that you have enough pages created!
5
Write in the text. Go through the pages and write or paste the text to the bottom of each page.
- If you have more text than you have room for, attach a piece of paper that folds out upon opening to the too-small text area. Problem solved!
6
Decorate the background for each page. Sketch the background out in pencil before coloring it in with your coloring medium of choice. Leave the tabs blank.
- If you have a good eraser, go back and erase your pencil lines after completion.

Part 3

Part 3 of 3:

Assembly

Download Article

1
Cut and paste your pictures onto the tabs. Cut out the pictures and illustrations you created. Glue the back of each one onto its corresponding tab. Do not allow it to get stuck to the background portion of the page, however. Then it won't pop!
- If you're using runny glue, be sure not to use too much. Apply the glue to the tab and not the picture; that way you won't risk getting glue above or below the tab.^{[5]
  X
  Research source}
2
Glue your pages together. The pages need to be glued together back to back. The top outer half of the second page would be glued to the lower outer half of the first page. The top outer half of the third page would be glued to the lower outer half of the second page. Continue this pattern until all the pages are attached to one another.
- Do not glue any of the pop up tabs together, though, since doing so will prevent them from popping up.
3
Create an outside cover. Fold a sheet of heavy paper that is slightly larger than the rest over the book. Slide the folded paper away from the book, decorate the back and front outer covers, and then glue the back and front inner covers to the first and last pages of the book.^{[6]
X
Research source}
- This, of course, is entirely optional. If you're using it as a story-like letter or other purpose, a cover may be unnecessary.
- Enjoy! Once the glue has dried completely, the book is ready to be read.

Community Q&A

Search

Add New Question

Question

What kind of glue should I use to make my pop up book?

Community Answer

Use a good glue stick as that won't seep through the page and ruin your drawing (it doesn't wet the page like liquid).

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 111 Helpful 303
Question

What is the best type of paper to use and can colored cards be used for the base?

Community Answer

Card stock or other thicker paper is advised and, yes, you can use colored cards.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 93 Helpful 195
Question

Is the cover supposed to cover the entire book?

Community Answer

The purpose of the cover is to cover the whole book and make it so glancing at the book won't cause people to already be reading the story. The whole book must be covered, but some can be sticking out, although it will look unprofessional.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 102 Helpful 198

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

You can also have more than one pop-up picture per page. Simply cut multiple pairs of slits along the fold, spacing them evenly apart, until you create the number of tabs you need for your illustrations.

Thanks
Helpful 6 Not Helpful 6