How to Make a Rubber Band Star

Reviewed by Amy Guerrero

Last Updated: July 30, 2024 Fact Checked

Making a star out of a rubber band is a simple trick that you can use to impress your friends! All you need is a sturdy rubber band a little bit of patience. Once you get a single star down, try making a star within a star to up the ante a bit.

Method 1

Method 1 of 2:

Creating a Single Star

Download Article

1
Place a sturdy rubber band over your left thumb and index finger. Put the rubber band near the end of your fingers and stretch your fingers out slightly so the rubber band stays taut. Turn your hand so that your palm is facing you.^{[1]
X
Research source}
- Choose a rubber band that's not too wide, as wide rubber bands are more difficult to stretch. Also, pick a slightly longer rubber band than normal. There's not a set width and length, but if you're having trouble stretching it around your fingers, it probably won't work.
When holding your palm toward you, you'll see 2 bands. Push your right index finger underneath the first one and hook your finger over the second band, pulling it out. It should go underneath the first band and out toward your palm.^{[2]
X
Research source}

Advertisement
3
Twist the loop over itself and hook it on your pinkie. Use your right hand to twist the band you just pulled out to the right over itself.^{[3]
X
Research source} It should make a little teardrop-shaped loop that you can hook over your pinkie.^{[4]
X
Research source}
- You should now have a triangle shape stretched between your index finger, thumb, and pinkie. The rubber band should twist around each finger to make a teardrop-shaped loop, and the triangle should be on the inside edges of your fingers, not the outside.
4
Reach into your thumb loop to grab the top band with your index finger. Insert your right index finger near the inside of your left thumb in the loop made by the rubber band, going down as you do. Go up through the middle triangle (with the thumb loop over your finger) to grab the band that's between your left index finger and your pinkie. Draw the band out the way you came in, through the thumb loop.^{[5]
X
Research source}
- You should now have a square in the middle. Keep holding on to the loop you pulled out with your right index finger.
5
Grab the right side of the band between your 2 index fingers. Insert your right middle finger up through the loop that's over your pinkie.^{[6]
X
Research source} Grab the band that's just to the left and pull it out below. Stretch out your fingers to make the final star!^{[7]
X
Research source}
- Your right index finger and right middle finger will be holding on to 2 points of the star.

Method 2

Method 2 of 2:

Moving to a Double Star

Download Article

1
Begin with a single star. To move to a double star, you need to be able to make the single star first.^{[8]
X
Research source} The double star is a continuation of the single star, so get your hands in position with your left index finger, left thumb, left pinkie, right index finger, and right middle finger each holding a point of the star.^{[9]
X
Research source}
- You will need a long rubber band that's not too wide. You should easily be able to stretch it between 2 hands. However, it should be small enough to maintain tension over 3 fingers on one hand.
2
Release your pinkie and your left thumb and stretch the triangle over them. Let the loops just pop over the edges of these fingers. As you do, you'll have a triangle shape with a loop over the right index finger and a loop over the middle index finger. Place the right index finger loop over your left thumb and the right middle finger loop over the left pinkie.^{[10]
X
Research source}
- Pull your right fingers out of the loops.
Use your right index finger and middle finger and grab the band the runs directly in front of your left index finger. It's technically the bottom part of the loop going over the index finger. Insert your fingers in it from the top but with your finger pads pointing up.^{[11]
X
Research source}
4
Pull the bottom loop down and twist it. The loop should end up below the other parts of the rubber band. Twist it over itself to the left, forming a new loop.^{[12]
X
Research source}
- The loop should currently be over your right index finger and middle finger.
Put your right index finger through the inside of the loop that goes over your thumb. Place your right middle finger through the inside of the loop that goes over your pinkie, going from the top each time.^{[13]
X
Research source}
Grab the loop that you pulled down from the top with your right thumb and pull it over the ends of your fingers while keeping them in the loops of the star.^{[14]
X
Research source} Pull down on the 2 loops at the bottom, and you have a star within a star!^{[15]
X
Research source}

Community Q&A

Search

Add New Question

Question

How do I make a rubber band star?

Drew Hawkins1

Community Answer

A simple way is to make a single star. Take a sturdy rubber band and place it over your left thumb and index finger. Stretch it out slightly so it's taut. When holding your palm toward you, you'll see 2 bands. Push your right index finger underneath the first one and hook your finger over the second band to pull it out. Then, use your right hand to twist the band you just pulled out to the right over itself and create a teardrop-shaped loop that you can hook over your pinkie finger. After that, reach into your thumb look to grab the top band with your index finger and then draw the band out the way you came in, through the thumb loop. Finish the star by grabbing the right side of the band between your 2 index fingers. Stretch out your fingers to make your star!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 25 Helpful 13
Question

How do you make a double star with a rubber band?

Drew Hawkins1

Community Answer

First, make a single star with the rubber band. Then, you can move to making a double star. Release your pinkie and your left thumb and stretch the triangle over them, which will create a triangle shape with a loop over the right index finger and a loop over the middle index finger. Then, place the right index finger loop over your left thumb and the right middle finger loop over the left pinkie. After that, use your right index finger to grab the bottom of the loop near your index finger and pull the bottom loop down before twisting it over itself to the left and forming a new loop. Put your right index finger through the inside of the loop that goes over your thumb and then place your right middle finger through the inside of the loop that goes over your pinkie. Finally, lift the loop that you pulled down from the top with your right thumb and pull it over the ends of your fingers while keeping them in the loops of the star and you'll end up with a double star.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 19 Helpful 8
Question

Is it bad to put a rubber band in your hair?

Drew Hawkins1

Community Answer

Yes, a rubber band is not a hair tie. If you put a rubber band in your hair, it can pull it too aggressively and potentially cause breakage. The more you damage and pull at your hair, the more wear and tear on your scalp, which could potentially lead to balding. No matter how convenient it may be, never use a rubber band as a hair tie. Instead, choose loose and smooth hair ties that don't have metal clasps. That way, you can keep your hair organized without hurting it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 23

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

If your fingers hurt, take a rest.

Thanks
Helpful 21 Not Helpful 9
Make sure to choose a loose rubber band. If it breaks, it can pop off and hurt you.

Thanks
Helpful 16 Not Helpful 7