This article was reviewed by Stan Kats. Stan Kats is a Professional Technologist and the COO and Chief Technologist for The STG IT Consulting Group in West Hollywood, California. Stan provides comprehensive technology solutions to businesses through managed IT services, and for individuals through his consumer service business, Stan's Tech Garage. Stan holds a BA in International Relations from The University of Southern California. He began his career working in the Fortune 500 IT world. Stan founded his companies to offer an enterprise-level of expertise for small businesses and individuals.
This article has been viewed 188,078 times.
The time on any alarm clock may be adjusted. However, with Auto-Set alarm clocks, the time doesn't look easy to fix. But with only a few extra steps, you can fix these too. This article will explain how to manually adjust the date and time on these Sony Auto-Set alarm clocks.
Steps
-
1Press and hold the "Clock" button, until you hear 2 beeps. Release the "Clock" button, when you hear those 2 beeps.[1]
-
2Press the Clock button again until the selected portion you'd like to adjust is blinking. It will allow you to adjust the following items in the following order by pressing the Clock button successively: You must first set the year (2 digits only), then month, the day, the hour (AM or PM) and finally the minute portion.Advertisement
-
3Use the plus and minus keys to advance forward and backward the individual entries, depending on how much off the item really is.[2]
- Adjusting the AM to PM setting can be done, by increasing or decreasing the hour portion of the time, so it extends over the noon or midnight hour.
-
4Save your settings. Press the Clock button again, to save your settings.
Community Q&A
-
QuestionWhat is the dst button used for?Community AnswerIt is used to set your clock to daylight saving time so you don't have to adjust it yourself.
-
QuestionWhat zone should be set for eastern standard time?Community AnswerTime zones are: [1] Hawaiian, [2] Alaskan, [3] Pacific, [4] Mountain(non Daylight savings AZ), [5] Mountain (with Daylight Savings) [6] Central and [7] Eastern.
-
QuestionHow do I change the alarm time?Community AnswerPress and hold the "Time" button, until you hear two beeps. Press the Time button again until the selected portion you'd like to adjust is blinking. Use the plus and minus keys to advance forward and backward. Save your settings.
Video
Tips
-
When your Sony Alarm clock was pre-programmed, the clock was pre-programmed with Eastern time in mind. However, if you live anywhere else, you'll need to adjust the hours using this method.Thanks
-
If your battery ever runs out and you need to replace it, don't ever unplug your device. If you do, you'll loose all settings and the device will never be auto-set ever again. Always leave your device plugged in when changing the battery.Thanks
-
If you live in an area where Daylight Savings Time isn't observed, most of the Sony Auto-Set alarm clocks will come with a DST button that, after a simple press, will turn off this feature, thereby changing the hour depending on the day it is set up. Realize that these Daylight Savings Time rules, are for the 2007 Daylight Savings Time date adjustment.Thanks
References
- ↑ https://www.sony.com/electronics/support/res/manuals/2899/28993612M.pdf
- ↑ https://www.sony.com/electronics/support/radios-clock-radios/icf-c1/articles/00191752
- Sony ICF-C318(Auto-Set) owners manual, PDF file page 2
About This Article
Reader Success Stories
-
"Using those fantastic diagrams, I was easily able to reset the time on my Sony. I had read 3 other articles, but without the diagrams, I wasn't able to decipher their meaning. Thank you!"..." more