How to Paint Fiberglass Chairs

Co-authored by Diane Henkler

Last Updated: November 8, 2024 Approved

Fiberglass was the wonder material of the 1960s. It is light, durable, and cheap, which has led to it being used to build everything from Corvettes to Eames chairs. It is, however, somewhat complicated to resurface and paint when it gets old and faded. This guide will teach you how to do both of those things on your precious Eames or other model of fiberglass chair.

Steps

Download Article

Be sure to wash off all debris no matter how small, especially oil grease.
Advertisement
3
Sand down the surface, preferably with an orbital sander ^{[1]
X
Research source}.
- Fiberglass can release glass dust into the air when sanded, which is dangerous to inhale and can irritate skin.
- To prevent this, wet the areas of the chair you're about to sand with water as you go. The water will trap the dust and keep it out of the air.
5
Apply the primer all over the chair. Let it dry.
- If you're using the recommended paint sprayer, fill the sprayer's tank with your primer mixture and spray on the chair from there.
- If you're stuck using a paint brush, just dip and prime.
Now you're ready to paint!
8
Apply your chosen paint to the chair using the sprayer or the brush. Let the paint dry, then repeat the process.
- Apply 2 to 3 coats.
- If you're using the paint sprayer wash the primer out of it first.
9
The final step is to seal the paint with a clear top coat. Use the sprayer if you have it or the brush if your don't.
- Penetrol is an effective and widely available top coat option in the US.
- Be especially careful if using a brush for this step. Brush marks made here will be painfully visible.

Community Q&A

Search

Add New Question

Question

Would a fiberglass outside garage door need to be painted or sealed?

Community Answer

Normally not. Fiberglass products usually come with a Gelcoat finish and need only be wiped or washed with dish soap and hot water. Older chipped or broken products can often be repaired or restored to original luster with a Gelcoat repair kit, or buffing with fine polishing compounds.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 3

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Gel-coat paint is designed specifically to be used on fiberglass. If you can find one in the color your want, go for it ^{[2]
X
Research source}.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Wear thick rubber gloves, a respirator mask, and protective eye wear during this project, especially if you are working inside.

Thanks
Helpful 2 Not Helpful 0
Painting outside increases the risk of getting dirt on your project but is also tremendously safer.

Thanks
Helpful 2 Not Helpful 3
If you have sensitive skin you should think carefully before attempting this project. The fiberglass dust that will almost inevitably wind up in the air will be particularly bothersome for you.

Thanks
Helpful 1 Not Helpful 1