How to Pan Fry a Ribeye Steak

Download Article

6 Recipe Ratings | Success Stories

Co-authored by Ollie George Cigliano

Last Updated: September 18, 2024 Approved

Download Article

ARTICLE

VIDEO

Properly pan-frying a ribeye is easy if you follow a few simple steps. If you'd like that delicious char and caramelization to form, and some great juices to flow, pan frying it produces great results. On top of that, the wonderful sizzling sound is very satisfying. It's all about selecting the right pan, getting the meat ready, and frying it correctly. Bon appétit!

Part 1

Part 1 of 3:

Selecting and Preparing the Pan

Download Article

1
Choose the right pan. Some pans work better than others. Ideally, you'd like to use a heavy pan like a cast-iron pan. These pans can reach really high temperatures that help sear the edge of the meat and keep in the flavors. They also help to produce that slightly crusted char that provides a sweet flavor.
- Many prefer a cast-iron pan because it can be used to sear the meat before transferring it into the oven.^{[1]
  X
  Research source}
- A griddle pan could work as a substitute for a flat pan.
- Select a smaller pan if possible. If you choose a larger pan you may be tempted to cook more than one steak at a time, and potentially miss the mark on the doneness.^{[2]
  X
  Research source}
2
Preheat the pan. The reason you preheat is that the steak tastes better when the edges get seared quicker. A preheated pan allows the ribeye to brown evenly, eliminating the water and creating a sweet caramelization. ^{[3]
X
Research source} Aside from that, a hot pan eliminates the need to flip the meat multiple times during cooking.^{[4]
X
Research source}
- If you have to flip the ribeye multiple times, don't worry too much. Some tests have shown the meat to be cooked more evenly and quickly when flipped multiple times.^{[5]
  X
  Research source}
Advertisement
3
Heat some oil. Choose something neutral like groundnut oil, which has a mild flavor and doesn't burn at high temperatures. Some other oils with high with smoke points are peanut oil, rice oil, and corn oil^{[6]
X
Research source}. If the oil is not hot, it could transfer an oily or greasy flavor to the meat. ^{[7]
X
Research source} Use about a quarter cup (60ml) in a traditional 12-inch pan.
- Do not use butter as your medium, because it smokes too quickly at high temperatures.
- Do not mix butter with the oil. It will not stop the milk proteins in the butter from burning.^{[8]
  X
  Research source}
- To know when the oil is ready, wiggle the pan around and there should be a nice, free-flowing movement to the oil.^{[9]
  X
  Research source}

Part 2

Part 2 of 3:

Preparing the Ribeye

Download Article

Ribeyes come in all shapes and sizes, but finding one roughly an inch (2.5 cm) thick is ideal. These steaks typically have the nice, fatty marbling on the interior that makes it delicious and moist. Additionally, there is little waste because of minimal gristle and only a thin strip of fat on the edge.
2
Set the meat out before cooking. Getting the meat to room temperature helps to ensure it's cooked all the way through. If the meat is cold, the outside of the meat may get dried out before everything is cooked through. It may take up to 30 minutes for a fresh out of the fridge ribeye to be ready for cooking. Be cautious not to leave the meat out too long, however; it could invite bacteria growth.
- Room temperature meat also cooks quicker.
- If it's not room temperature, there is a risk of a cold center. ^{[10]
  X
  Research source}
3
Pat it dry. Use a paper towel to get rid of some of the outer moisture on the steak. If there are water droplets or extra moisture, you run the risk of steaming the steak. If the moisture is removed, the steak has a better chance of reacting with the hot oil to produce that great char.^{[11]
X
Research source}
- This doesn't need to be done aggressively. Patting too hard may flatten the meat out some.
4
Season the ribeye. After the meat is patted dry, it's almost time to cook. First, it's time to apply spices. Different spices please different palates, and you'll know what works for you. In general, however, many chefs recommended dressing a steak with a drizzle of extra virgin olive oil, some black pepper, and kosher salt. ^{[12]
X
Research source}
- Wait until just before cooking to apply the spices. Seasoning too long before cooking could cause the salt to dry out the ribeye.^{[13]
  X
  Research source}

Part 3

Part 3 of 3:

Frying the Ribeye

Download Article

Putting it down too quickly can cause the hot oil to splatter. Try to centralize it in the pan so the heat is evenly distributed. It should make a pleasing sizzling sound immediately. If not, the oil is not hot enough. Additionally, it should stick to the pan. Give it a firm push all around to ensure there are no air pockets and all portions of the meat are touching the pan.^{[14]
X
Research source}^{[15]
X
Research source}
2
Resist the urge to flip the ribeye. No matter what you do, don't be tempted to peek at the steak's underside. Don't flip it. Don't move it. Simply wiggle the pan back and forth. If the meat releases, it's likely ready to flip onto the other side. If not, it needs more time.^{[16]
X
Research source}
- The generally accepted practice is to flip the steak one time.^{[17]
  X
  Research source}
- After each side is cooked, some prefer to use tongs and hold the ribeye fat-side-down, just to cook off some of the excess fat.^{[18]
  X
  Research source}
3
Cook it for a few minutes each side. Depending on the size of the steak and the thickness, cooking times vary. The same can be said for how hot the pan is. In general, however, the steak should be on each side for 2:30-4:30 minutes, depending on the level of doneness you prefer. This helps it cook all the way through, as well as cook off some of the fat.^{[19]
X
Research source} For a 3.5cm/1.3in. steak, the following is a good guideline:
- Rare – 2:15 per side (125 F/ 51C) – There will be significant redness inside. A very pliable ribeye.
- Medium-rare – 3:15 per side (135 F/ 57C) – More pink than red, this steak will be slightly tougher than rare and have considerable juices flowing.
- Medium – 4:15 per side (140 F/ 60C) – Slightly pink inside, there will be minimal juice escaping.
- Well-done – Over 4:15 per side (155 F/ 68C) – Cooked until thoroughly dark, the level of doneness ranges from spongy to hockey puck, depending on the desired result.^{[20]
  X
  Research source}^{[21]
  X
  Research source}
- Some prefer to get the initial char and then put it into the oven. This is a good way to retain moistness and flavor.
While you're cooking it, put in a few slabs of butter. Once the butter is melted, use a spoon and repeatedly baste the steak over and over.^{[22]
X
Research source} The reason for this is to establish an outer-crust, as well as improve and accentuate the flavor.^{[23]
X
Research source}
5
Let the ribeye rest before serving. Take it out and let it sit for 5-10 minutes after you're done cooking.^{[24]
X
Research source} When the steak rests, the meat fibers reabsorb the juices of the steak. Realistically, the meat remains moist and retains heat for nearly 10 minutes after being taken out of the pan.^{[25]
X
Research source}
- You can even add a pat of butter onto the hot steak once it's been set on a plate.

Video

Read Video Transcript

Community Q&A

Search

Add New Question

Question

How long can steak be kept in a refrigerator before cooking?

Community Answer

Do not exceed three days, or, if the steak is labeled with an expiration date, do not exceed that.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 6
Question

How much butter was put in the pan in the beginning?

Community Answer

Use clarified butter instead of regular butter. Use 2 tbsp to cook the steak and the rest for making the sauce.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 16
Question

If I salt the steak before frying it, will it taste very salty?

Community Answer

No, not necessarily. When the steak is cooking, a lot of the salts and spices flow away with the juices that build up, along with the butter and oil. If you're concerned, just salt it lightly.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 3

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Obviously the meat can stand up on its own flavor wise, but you can use steak sauce or any kind of condiment that suits your palate.

Thanks
Helpful 22 Not Helpful 39