How to Play American Indian Flute

Co-authored by wikiHow Staff

Last Updated: November 26, 2023 Approved

The American Indian Flute is a fun and fairly easy instrument with a rich history. Its six holes and two chambers make it unique from other flutes. To play it, you’ll need to learn how to hold the flute, seal the holes with your fingers, blow air through it properly, and master some basic scales.

Part 1

Part 1 of 3:

Holding the Flute

Download Article

1
Check that the bird is in place. The bird, or block, is the wooden piece sitting on the bridge of the flute, often bound with a leather string. Unbind the string and adjust the bird until it’s lined up right behind the sound hole, the second hole in the channel that holds the bird.
- The edge of the bird should just barely touch the sound hole.
- Tie the leather string around it so it fits snugly against the flute.^{[1]
  X
  Research source}
2
Hold the flute comfortably with both hands. Your thumbs should be under the body of the flute, with the line of holes facing forward. Some musicians hold the flute straight out horizontally and some play with it pointed straight down. Try both and tilt the flute’s angle until you find a position that that feels most comfortable.^{[2]
X
Research source}
- The larger and heavier your flute is, the more vertical you’ll want to hold it. Changing the angle will help reduce the strain on your muscles.
Advertisement
3
Sit or stand with your back comfortably straight. Keep your back straight so your diaphragm is open and free. This will help you control your breathing while playing.^{[3]
X
Research source}
- You shouldn’t force it, though—stay comfortable and relax into the straight posture.^{[4]
  X
  Research source}
- Keep your arms, shoulders, and neck natural and relaxed.

Part 2

Part 2 of 3:

Playing Your First Note

Download Article

1
Practice placing your fingers over the holes. Use whichever hand feels most comfortable (usually, this is the right hand) to cover the first three holes and your other hand to cover the bottom three holes.^{[5]
X
Research source} Make sure to use the pads of your fingers, not your fingertips. This will help seal off the hole and produce a cleaner note.
- If your finger doesn’t completely seal the hole while you play, it will make an ugly screeching sound. If this keeps happening, practice your finger placement.
2
Place your mouth around the mouthpiece. Pucker your lips, then place the mouthpiece under your top lip and on top of your bottom lip. Add a bit of pressure to seal your lips around the flute. Your top lip should partially seal the blowhole—also known as an “embouchure”—on the mouthpiece.
- The flute should not go inside your mouth, but simply rest on your lip. This will give you better control over your air flow and keep too much moisture from getting into the flute.
3
Blow air into the flute. Start gently, then add force to your breath. Listen to how the quality of the sound changes as your breathing changes from weak to strong. Play around with your breath until you produce a steady, clear sound.^{[6]
X
Research source}
- During this exercise, you may find it easiest to hold the flute without covering any of the holes so you can focus on your breath. Once you feel comfortable with the force your breath, try practicing it while playing different notes.
- Try not to “overblow,” or blow with so much force that the note jumps up to a higher pitch.^{[7]
  X
  Research source}
4
Practice the “tonguing” technique. Once you’ve mastered steady blowing, you’re ready to learn another basic technique. Blow into the flute once again, but this time make a soft “doo” sound as you blow. This should produce a slightly different sound and allow you to control the beginning and end of a note. Practice this until it feels comfortable.^{[8]
X
Research source}
- While practicing tonguing, you may want to hold the flute without covering any of the holes so you can focus on the tonguing technique. After you feel more comfortable with the new technique, try playing different notes while tonguing.
Just like tonguing, this technique is done with articulation, not fingering. Instead of the “doo” sound, you’ll say “ta kahhh” while playing a note. Practice saying it out loud several times, then try it with the flute.^{[9]
X
Research source}
6
Learn an advanced technique such as note bending. Ornamentation is an important part of playing the American Indian flute—advanced techniques allow you to add personality and character to your music. To note bend, play a note with at least one finger hole covered. Slowly lift your finger up off of the hole to change the pitch.^{[10]
X
Research source}
- You can also roll or slide your finger up and down the body of the flute to bend the note.^{[11]
  X
  Research source}

Part 3

Part 3 of 3:

Advancing to Scales and Melodies

Download Article

1
Master the minor pentatonic scale. Once you nail this basic scale, you’ll be able to start creating and learning simple melodies on the flute. Keep a finger over the third hole from the top throughout this entire scale. Start with all six holes covered, then one by one, lift your fingers off the holes from bottom to top.^{[12]
X
Research source}
- Practice this scale forwards and backwards until you can play it comfortably.^{[13]
  X
  Research source}
2
Learn the diatonic scale. This is the classic “do-re-mi” scale that includes eight different notes. You can find an easily readable chart for this scale on Flutecraft's website. Start with all holes covered except the very bottom one and move through the scale until you end on the last note with the third, fourth, and fifth hole covered.^{[14]
X
Research source}
- Practice the scale forwards, then backwards to really perfect it.
3
Use online charts to learn songs easily. Find a visual chart on a website such as Waking Spirit to get started, then follow the indicated finger placements. These charts are easily readable—no music-reading experience required. The chart will show you step-by-step which finger placements make up each note.^{[15]
X
Research source}
- Once you’ve gotten the hang of this, you can move on to learning tablature and sheet music.
A common mistake beginners make is trying to learn a complicated song too soon and getting frustrated. Start with something simple like the classic hymn “Amazing Grace” and master it before moving on to more advanced songs.
Use the notes you learned in the minor pentatonic scale to create your own melody. Close your eyes and just play whatever note comes to you. This will exercise your creative abilities and help you practice fingering and breathing techniques.

Community Q&A

Search

Add New Question

Question

Why does my flute keep making a screeching noise?

Community Answer

You're probably overblowing, or breathing with too much force into the mouthpiece. Try softening and controlling your breath until the note sounds more natural.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 18
Question

I can get no sound from my flute. What is wrong?

Community Answer

Try adjusting the block by loosening the leather strap and move it closer or away from the sound hole till you get the best sound. Re-tighten the leather strap.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 8
Question

I cant seem to get my fingers over the holes completely. Any suggestions?

Community Answer

You can try wearing gloves so your fingers are bigger!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 10

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

An echo effect "box" may be used between the microphone and the amplifier to make the sound even more haunting.

Thanks
Helpful 14 Not Helpful 6
This is a fairly quiet instrument, so if you are trying to fill a room with sound, use a microphone and an amplifier. Place the microphone near the air hole for the best sound.

Thanks
Helpful 3 Not Helpful 1