How to Polish Stainless Steel

Co-authored by Raymond Chiu

Last Updated: October 12, 2023 References

VIDEO

Stainless steel is prone to tarnishing and water marks, so polish your steel items regularly to restore its shine. You can polish the surface of stainless steel using water, non-toxic cleaners like vinegar or olive oil, or a specialized steel cleaner. Polishing stainless steel the right way will help you thoroughly clean the appliance and avoid scratching it further. Choose which method is best for the object and start polishing your stainless steel item.

Method 1

Method 1 of 3:

Polishing with Vinegar

Download Article

Certain vinegars can work better than others. White and cider vinegar works similarly on stainless steel, but cider vinegar leaves a more pleasant smell.^{[1]
X
Research source} Use what you have on hand. Cleaning vinegar is best for tough stains thanks to its higher acidity. If your appliance is heavily tarnished, purchase cleaning vinegar.
Like wood, stainless steel has a grain that will run either vertically or horizontally. Wiping the steel down in the direction of the grain will help you reach the small grooves where dirt or grime can get trapped.^{[2]
X
Research source}

Advertisement
3
Spray your steel liberally with vinegar. Pour the vinegar in a spray bottle to lightly coat the stainless steel in vinegar. Then, spray the vinegar over the item until the item is thinly covered in vinegar. If you do not want to use a spray bottle, you can moisten a cloth in vinegar and evenly rub the item.
- For light polishing, dilute the vinegar with water (1/2 cup of vinegar for every quart of warm water).^{[3]
  X
  Research source} Polish with undiluted vinegar on items with heavy staining.
4
Wipe the steel down with a soft cloth. Using either a soft cloth or paper towel, wipe the vinegar off in the direction of the grain. This will remove debris from the item and restore its shine. Remember to wipe in the direction of the grain. You don't want vinegar to stay caught in the grooves and cause your steel to fade over time.
- Paper towels can leave behind fibers or break off into small pieces. A washcloth will polish the stainless steel best.

Method 2

Method 2 of 3:

Polishing with Olive Oil

Download Article

1
Pour olive oil onto a soft cloth. Pour one or two dime-sized dots onto a soft microfiber washcloth. Remove the top of the olive oil bottle and place the cloth over the top. Then, flip the bottle over and allow the oil to soak into the cloth for one to two seconds.
- If desired, you can substitute olive oil with baby oil or take unscented liquid paraffine, enriched with some dops of clove oil.^{[4]
  X
  Research source}

Before you begin buffing the object, coat the entire surface of the object in olive oil. Continue wiping the object until you can see a light sheen across the surface. If one patch is more heavily coated than another, spread the patch around evenly.
2
Apply firm, steady pressure to the surface in circular motions. While you're applying pressure to the object, you will use the same cloth that you applied the olive oil with. Use considerable pressure to work the olive oil into the grooves. Continue working the olive oil in for several minutes until you have moved over the entire object.
- Again, check the direction of the grain before you wipe the oil off. Applying pressure against the grain can dull stainless steel if olive oil remains trapped in the grooves.
3
Use a clean cloth or paper towel to remove excess oil. If you allow the oil to sit on the stainless steel, it can dull the metal instead of polish it. Using a clean, soft cloth, wipe the object down until dry. ^{[5]
X
Trustworthy Source

American Lung Association
Nonprofit health organization dedicated to improving lung health through education, advocacy, and research

Go to source}
- After you have finished wiping down the object, lightly touch it. If it still feels oily, continue wiping. Use your cloth to wipe off the fingerprints after you have touched it.
EXPERT TIP

James Sears
House Cleaning Professional
James Sears leads the customer happiness team at Neatly, a group of cleaning gurus based in Los Angeles and Orange County, California. James and the team have nine years of experience and offer green cleaning, interior and exterior window washing, and general apartment cleaning services. He provides transformative cleaning experiences by reducing clutter and renewing your home environment. James is a Trustee Scholar at the University of Southern California.

James Sears
House Cleaning Professional

Try using another natural cleaner like lemon or lemon juice. Lemon juice is acidic and can remove tarnish from stainless steel. Soak the item with water and lemon juice or simply rub the object with the lemon juice and a cloth.

Method 3

Method 3 of 3:

Polishing with Specialized Cleaners

Download Article

1
Choose a non-waxy steel polish. Waxy polishes leave behind a film, which can gradually dull your stainless steel over time. For best results, use a non-waxy polish with an abrasive component.
- You can get stainless steel polishes at most grocery stores in the cleaning aisle. Ask a store employee if you need help locating them.
Water-based cleaners will not remove smudges or fingerprints from stainless steel. For the best polish, use an oil-based cleaner. Water-based cleaners, however, are healthier for the environment, usually less flammable, and less toxic. Decide which benefit is more appealing to you.^{[6]
X
Research source}
3
Find a well-ventilated area to polish your item. Some specialized cleaners can emit fumes that are dangerous to inhale in small spaces. Polish your stainless steel near a window or outside to avoid lightheadedness. Open any windows and doors before you begin cleaning, and never use specialized cleaners in enclosed rooms.
- If you feel lightheaded, nauseated, or otherwise ill, leave the room immediately and contact poison control. Keep the product label nearby if possible to give the poison control specialists information.^{[7]
  X
  Trustworthy Source
  
  U.S. National Capital Poison Center
  Independent poison control center providing resources to prevent poisonings and save lives
  
  Go to source}
4
Spray the cleaner over the object until it is coated in the cleaner. Wear rubber gloves while you spray to avoid getting the stainless steel cleaner on your hands.^{[8]
X
Research source}
- Refer to the cleaner label for specific directions and warnings.
Use a dry microfiber cloth to wipe down your appliance. After you have finished wiping down the object, your object is ready to use. Clean your stainless steel as part of your daily cleaning routine (or after use) to avoid grime buildup until you polish again.

Community Q&A

Search

Add New Question

Question

Can linen finish or pearl finish stainless steel be polished?

Community Answer

Yes, of course. If your stainless steel is good quality, the finish should hold up.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 5
Question

What is the best steel polish and cleaner?

Community Answer

"Bartenders Friend" in the original powder form is hands down the the best product for polishing heavily tarnished stainless steel. I was amazed by the results and everyone I've recommended the product to agrees. I was able to remove heavy carbon and tarnish from a stainless steel barrel that appeared beyond saving as the result of a fire. Mix warm water and powder to form a paste, apply with a sponge working in the direction of the grain. Polish dry with a non-abrasive cotton terry cloth. Repeat the process until desired finish is achieved.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 21
Question

How do I clean rust off stainless steel?

Community Answer

Soak in a bucket of white vinegar for 1 - 5 days, depending on amount of rust. Scrub with a metal brush afterward.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 10 Helpful 6

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Read Video Transcript

Things You’ll Need

Cleaning, cider, or white vinegar
Water
Microfiber cloth
Paper towels (optional)
Spray bottle
Olive oil
Non-waxy cleaner
Gloves

Tips

Don't use excessively hard water on stainless steel, as hard water can leave spots.^{[9]
X
Research source}

Thanks
Helpful 1 Not Helpful 0
Don't use steel wool when polishing stainless steel. Steel wool can be abrasive to metal and leave scratches.^{[10]
X
Research source}

Thanks
Helpful 1 Not Helpful 0
Use a microfiber cloth when polishing to avoid leaving streaks on your steel.

Thanks
Helpful 1 Not Helpful 1

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Not all specialized cleaners are safe for kitchen appliances. Look for a "non-toxic" label on the package, and read all warnings on the back.

Thanks
Helpful 5 Not Helpful 0
Avoid purchasing general metal cleaners that use chlorine or bleach, which can damage stainless steel.^{[11]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Do not mix bleach and vinegar, as the combination can create toxic chlorine gas.^{[12]
X
Research source}

Thanks
Helpful 0 Not Helpful 0