How to Program a Philips Universal Remote: With + Without Codes

Download Article

A simple guide to programming a Philips universal remote

Co-authored by Darlene Antonelli, MA Reviewed by Stan Kats

Last Updated: December 6, 2024 Fact Checked

Download Article

Using Auto Code Search

|

Direct Code Entry

|

Q&A

|

Tips

Philips universal remotes are neat devices that can be programmed to operate almost any television, DVD player, Blu-ray device, set-top box, or cable box. While the setup process is different for every unique model, the gist is generally the same. Using auto-code search takes a lot of the guesswork out of the process. This wikiHow article walks you through setting up a Philips universal remote.

Programming a Philips Universal Remote with Auto Search

Turn on the device you want to control, then press and hold the "Setup" button on the remote.
Press and release the device button for the device you want to control.
Point your remote at the device, then press the "Power" button to start the code search.
Your device will turn off when the right code is located.
Press the device button again.

Method 1

Method 1 of 2:

Using Auto Code Search

Download Article

1
Turn on the device that you want to sync the remote with. Whether it is a TV, DVD player, or another device, plug it in and turn it on. Give a few minutes to turn all of its components on and get running. The device that you are syncing the remote with must remain on throughout the entirety of the programming process.^{[1]
X
Research source}
- Make sure that there are batteries in your universal remote before you begin the installation process. They don’t usually come with them, but they take AA batteries so this shouldn’t be too tough of a fix.
- Before you begin, check to see if the Philips remote is compatible with your device. Your Philips universal remote can be synchronized with most televisions, DVD players, Blu-ray players, and cable boxes. While the vast majority of major brands on the market are compatible, some brands will not work. Consult your device’s manual or search online to see if the remote will work with your device.
- Universal remotes typically wipe their memory settings after being synced with more than 3 devices. Consider getting 2 separate remotes if you have more than 3 devices that you want to use.
- The list of compatible brands will be listed in the instruction manual for the remote. There will be a list with a bunch of codes in the back.
- Using Auto Search is the best way to program a Philips remote with any device without needing a code.
2
Press and hold the “Setup” button. If you don't have a "Setup" button use the Direct Code Entry method.
- Point your remote at your device and press the "Setup" button. Hold it down for 5 seconds. Once the red LED light near the top comes on, release the button.^{[2]
  X
  Research source}
- The LED light may be blue, but most of the older remotes use red lights.
Advertisement
3
Press and hold the device button that you want to control. There is a row of buttons at the top listing the possible devices that you can sync your remote with including TV, DVD, or DVR. Press the button that corresponds to the device you’re setting up. Once the LED light at the top glows blue or red once, release the button.
- If you have an older remote, don’t wait for a light to come on after you hold the device button down. It may blink, but it may not. Just hold it down for 5 seconds and continue with the programming.
Tip: Most of the device buttons are obvious. TV, VCR, and DVD all correspond to those devices. STB stands for set-top box, and is what you need to press to sync the remote with a newer cable box and playback devices (like Roku, or TiVo). BD stands for Blu-ray device.
4
Press the "Power" button. Make sure you're aiming the remote at the device that you want to pair as it is sending codes, trying to find the right one.
- Since codes are sent 10 at a time, you might need to repeat this step and press the "Power" button again until you find a code that works.
- The light on your remote will blink after sending a code, then remain lit after 10 codes have been sent.
- The device will power off when a correct code is sent.
5
Press the same device button. For example, if you previously pressed the "DVD" button, you need to press that again to store the code for that particular device.
- Your remote is now programmed with that device. Press more buttons on the remote to make sure you can use them all. If not, you may need to enter a code manually.

Method 2

Method 2 of 2:

Direct Code Entry

Download Article

1
Find your device’s 4 or 5-digit code by consulting the instruction manual. Open your universal remote’s instruction manual and flip to the back. You’ll find a table of brand names and a list of corresponding codes. Once you find your brand, look at the list of devices and find your model’s unique code. Underline or mark the code in the manual to ensure that you can find it quickly in the future.^{[3]
X
Research source}
- Common brands, like Samsung, Westinghouse, or LG, may have 20-30 codes listed under their brand. Mark your specific device so that you don’t have to spend a bunch of time searching for it in the future.
- On newer remotes and newer TVs, the list of available codes may pop up on your screen after you prompt it for programming with the device button.
- Older devices usually use 4-digit codes. Newer devices usually use 5-digit codes.^{[4]
  X
  Research source}
- You can find a list of devices and codes from this Philips site or by searching online.
Tip: If one of the codes for your device ended up not working, you can retry the entire process using a device number for a different model in your brand. Sometimes there are software patches and updates that can interfere with which codes work on certain devices.
The other device needs to be on for this to work.
3
Press and hold the device button that you want to control for 5 seconds. There is a row of buttons at the top listing the possible devices that you can sync your remote with including TV, DVD, or DVR. Press the button that corresponds to the device you’re setting up for about 5 seconds. Once the LED light at the top glows blue or red once, release the button.
- If you have an older remote, don’t wait for a light to come on after you hold the device button down. It may blink, but it may not. Just hold it down for 5 seconds and continue with the programming.
4
Enter the code on the number pad to make your device recognize your remote. Use the number pad on your remote to enter the corresponding 4 or 5-digit code for your device. Based on the model of your remote, the blue or red lights on your remote should turn off if you enter a valid code.^{[5]
X
Research source}
- If a code doesn’t work, you may not be able to enter a new code immediately. On most older remotes, you’ll need to go through the entire setup process again. If the blue or red light on your remote blinks once and then stays lit, your code is invalid but you can enter a new one.

Community Q&A

Search

Add New Question

Question

What’s the Insignia code for the Philips universal remote control?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

It should be in the back of your remote's instruction manual. The code is different depending on your remote's model. You can find a list of Insignia codes online if you don't have access to the manual.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 28 Helpful 16
Question

What do I do if the up and down buttons don't work on my Philips universal remote?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Try re-programming your remote and your device. There may have been a software update that is interfering with some of your buttons. If the up and down buttons on your standard remote are working, this is likely the case. Run through the programming process again to reset it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 6
Question

How do I program this for a Chromecast?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Program your remote to synchronize it with the television, not the Chromecast. It should work the same as a standard remote. Keep in mind, the only buttons that work with Chromecast (on any remote) are the play and pause buttons. You still have to control what plays through your phone or computer.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 3

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Philips has created a number of different remotes over the years. Some of them have slightly different instructions, so it's best to consult your manual before beginning the setup process to see how your remote differs.

Thanks
Helpful 0 Not Helpful 0
The Philips Universal Remote is preprogrammed to work with Samsung and Roku TVs. Press "TV" on your remote for a Samsung TV and "STR" for Roku.

Thanks
Helpful 0 Not Helpful 1
If you don't like this remote, you can always use a different universal remote like an RCA, ONN, or GE universal remote.

Thanks
Helpful 0 Not Helpful 0