PDF download Download Article PDF download Download Article

Medical masks are more commonly known as surgical masks. They’re mainly used by health care professionals to protect themselves and others from the spread of airborne infectious diseases, bodily fluids and particulate matter.[1] During a bad disease outbreak, health departments may also recommend that members of the public wear surgical masks to protect themselves. These masks are generally designed to completely cover both your mouth and nose.[2] [3]

Method 1
Method 1 of 3:

Understanding Medical Masks

PDF download Download Article
  1. Medical or surgical masks are intended to cover both your mouth and nose. They are designed with material that can block large-particle droplets, splashes, sprays and splatter — all of which may contain viruses or bacteria that may be harmful to you.[4]

    Note: Small-sized particles, however, may still be able to penetrate a medical mask. And, because the medical mask isn’t sealed against your skin, particles are also able to penetrate those openings.

  2. An N95 respirator is a device used by health practitioners to block 95% of very small particles. Unlike medical masks, N95 respirators fit more securely on your face and against your skin, and are able to filter airborne particles.[5]
    • While an N95 respirator can block 95% of very small particles — very small being considered 0.3 microns — there is still a 5% chance harmful particles can penetrate the respirator.
    • N95 respirators are not designed for use by children or by people who have facial hair.
    • Some N95 masks come with an exhalation valve that is designed to reduce condensation build-up inside the mask and allow the wearer to breathe easier. These masks, however, should not be used in a situation where a sterile field is required as the exhalation valve allows unfiltered (and possibly contaminated) air to leave the mask.[6]
    • In general, each type of N95 mask should come with detailed instructions from the manufacturer explaining how to put on and take off the mask. In order to ensure proper protection for both you and your patients, these instructions — above all others — must be followed. The Occupational Safety & Health Administration (OSHA) also requires that users are trained how to fit and use N95 respirators.[7]
  3. Advertisement
Method 2
Method 2 of 3:

Putting on a Mask

PDF download Download Article
  1. Before touching a clean medical mask, wash your hands thoroughly with both soap and water.[8]
    • Once you’ve applied soap to your wet hands, you should rub your hands together to wash them for at least 20 seconds before rinsing them off.
    • Always use a clean paper towel to dry your hands, and then place that paper towel into a trash bin.

    Tip: Before you throw away your paper towel, use it to open/close a door after you’ve washed your hands.

  2. Once you’ve taken a new (unused) medical mask from the box, check it to ensure it doesn’t contain any defects, holes or tears in the material. If the mask has defects, holes or tears, throw it away and select another new (unused) mask from the box.[9]
  3. In order for the mask to fit as close to your skin as possible, the top portion of the mask will have a bendable, but stiff, edge that can be moulded around your nose. Ensure this bendable side is facing upwards before applying the mask to your face.[10]
  4. The inside of most medical masks are white in colour, while the outside has a colour of some sort. Before applying the mask to your face, make sure the white side of the mask is facing towards your face.[11]
  5. There are many types of medical masks available, each with different methods of attaching the mask to your head.[12]
    • Ear Loops — Some masks have 2 ear loops on either side of the mask. These loops are normally made of an elastic material so they can be stretched. Pick up this type of mask by the loops, put 1 loop around one ear and then put the other loop around your other ear.
    • Ties or Straps — Some masks comes with pieces of fabric that are tied around the back of your head. Most masks with ties come with upper and lower ties or straps. Pick up the mask by the upper ties, place the ties around the back of your head and attach them together with a bow.
    • Bands — Some masks come with 2 elastic bands that are placed over and around the back of your head (as opposed to around your ears). Hold the mask in front of your face, pull the top band over the top of your head and place it around the crown of your head. Then pull the bottom band over the top of your head and place it at the base of your skull.
  6. Now that the medical mask is in place on your head and face, use your index finger and thumb to pinch the bendable portion of the top edge of the mask around the bridge of your nose.[13]
  7. If you’re using a mask with bands that tie on the top and bottom, you can now tie the bottom band around the base of your skull. Because adjusting the bendable nose piece can impact the fit of the mask, it is best to wait until after the nose piece is in place before tying the bottom straps.[14]
    • If you’ve already tied the bottom straps, you may need to re-tie them more tightly to get a snug fit.
  8. Once the mask is completely secured, adjust it to ensure it covers your face and mouth, and so the bottom edge is under your chin.[15]
    EXPERT TIP
    World Health Organization

    World Health Organization

    Global Public Health Agency
    The World Health Organization (WHO) is a specialized agency of the United Nations responsible for international public health. Founded in 1948, the World Health Organization monitors public health risks, promotes health and well-being, and coordinates international public health cooperation and emergency response. The WHO is currently leading and coordinating the global effort supporting countries to prevent, detect, and respond to the COVID-19 pandemic.
    World Health Organization
    World Health Organization
    Global Public Health Agency

    Expert Warning: Masks are effective only when used in combination with frequent hand-cleaning with alcohol-based hand rub or soap and water.

  9. Advertisement
Method 3
Method 3 of 3:

Taking Off a Mask

PDF download Download Article
  1. Depending on what you were doing with your hands before you remove your mask, you may need to wash your hands. Or you may need to remove medical gloves, wash your hands, then remove the mask.[16]
  2. In general, remove the mask by only touching the edges, straps, loops, ties or bands. Do not touch the front portion of the mask which may be contaminated.[17]
    • Ear Loops — Use your hands to hold the ear loops and remove them from around each ear.
    • Ties/Straps — Use your hands to untie the bottom straps first, then untie the top straps. Remove the mask while holding onto the top ties.
    • Bands — Use your hands to bring the bottom elastic band up and over your head, then use your hands to do the same with the top elastic band. Remove the mask from your face while holding the top elastic band.
  3. Medical masks are designed to only be used once. Therefore when you take the mask off, place it in the trash immediately.[18]
    • In medical settings there is most likely a garbage bin specifically for biohazardous items like used masks and gloves.
    • In a non-medical setting where the mask could be contaminated, place the mask by itself inside a plastic bag. Tie the plastic bag closed and then throw the plastic bag in the garbage bin.
  4. Once you’ve disposed of the mask safely, wash your hands once more to ensure they’re clean and didn’t get contaminated by touching the dirty mask.[19]
  5. Advertisement


Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

  • The Centers for Disease Control and Prevention (CDC) has a webpage with detailed information pertaining to medical masks and N95 respirators at http://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/respsource3healthcare.html. This site includes photos of different types of masks, comparisons between masks, and a list of FDA approved mask manufacturers.
  • Ideally you should use soap and water whenever you’re required to clean your hands. However, if soap and water is not available, you can use a hand sanitizer with at least a 60% alcohol content. In order to make sure you’ve used enough sanitizer, you should be able to rub your hands together for more than 10 seconds before they’re dry.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

  • Medical masks and N95 respirators are currently in short supply and should be preserved for medical professionals.
  • Medical masks are intended to be used once and by only one person. Once they’ve been worn, they should be thrown out and not used again.[20]
  • There are many types of masks made for non-medical use that can usually be found in a hardware store. These masks are designed to keep dust particles away from a worker’s mouth and nose while working with wood, metal or other types of construction work. These types of masks are not regulated by the FDA and are not approved for use in medical settings.[21]
  • At present, WHO does not recommend wearing facemasks unless you are sick or caring for someone who is sick with COVID-19.[22]
Advertisement

About This Article

World Health Organization
Co-authored by:
Global Public Health Agency
This article was co-authored by World Health Organization. The World Health Organization (WHO) is a specialized agency of the United Nations responsible for international public health. Founded in 1948, the World Health Organization monitors public health risks, promotes health and well-being, and coordinates international public health cooperation and emergency response. The WHO is currently leading and coordinating the global effort supporting countries to prevent, detect, and respond to the COVID-19 pandemic. This article has been viewed 779,574 times.
57 votes - 85%
Co-authors: 32
Updated: October 17, 2024
Views: 779,574
Article SummaryX

To put on a medical mask, first wash your hands with soap and water or hand sanitizer. Then, remove a new mask from the box and make sure there aren’t any tears or holes in it. Locate the top edge of the mask, which is the stiff, bendable edge that can be molded to fit your nose. Make sure the colored side of the mask is facing outwards and the white side is facing towards you. Then, place the mask on your face so it’s covering your nose and mouth. If the mask has 2 ear loops on either side of it, wrap these around your ears to hold the mask in place. If the mask has ties on it, position the top ties over the crown of your head and tie a bow to secure them. Then, do the same thing with the bottom ties at the nape of your neck. For a mask with bands, pull the top band over your head so it rests on the crown of your head. Then, pull the bottom band over your head so it rests on the nape of your neck. Mold the stiff edge at the top of the mask to your nose, and pull the bottom of the mask down so it’s covering your mouth and chin. When you’re ready to remove your medical mask, wash your hands with soap and water or hand sanitizer first. Then, remove the mask using the ear loops, ties, or bands. Avoid touching the front of the mask since it could be contaminated. Finally, throw the used mask in the trash and wash your hands one more time. To learn how to remove a medical mask and how to dispose of it safely, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 779,574 times.

Reader Success Stories

  • Niki

    Niki

    Jul 23, 2017

    "I had no idea which side to face out, or that it was different if you were sick or trying to not get sick. Now I..." more
Share your story

Did this article help you?

Advertisement