What Kind of Reality Check Do I Need Quiz
Coming soon
Search
-
QuestionI poured acid before disposing the water in the pool. What must I do now?Uthra BalakrishnaCommunity AnswerQuickly drain it off. The acid will be stuck on the walls. Clean it and pour the water.
-
QuestionFor how long I should wait to enter the pool after I put acid?Community AnswerDepending on how much acid you added and if your filter is moving the water rapidly about a hour, check with your test kit (phenol red), it will let you know the acid level. I add a bit less than calculated and then adjust further in small doses, that saves money. Note: you should retest next day as some cement/concrete pools react with acid causing a small pH bounce.
-
QuestionHow can you tell if the acid is working?Community AnswerIf the dirt disappears, it's working.
-
QuestionHow do I deal with the big blue sections left on my gunnite pool after acid washing?Community AnswerYou may need additional people to help. If the pool is empty, prompt and quick cleanup of puddles and timing of soak are necessary. One person should do all of each area as strength, soak time, time of day, wind and temperature affect the job and work speed and consistency are needed.
-
QuestionI have fiber glass pool do I use acid too?Uthra BalakrishnaCommunity AnswerNo, because it is fiber and may break, so use a wet cloth to clean it.
-
QuestionDoes it matter that our pool is concrete? Is that the same as the plaster that you are referring to in the acid bath wash?Lee TonCommunity AnswerIt is the same. Just note, using acid will remove some of the material, thus reducing the life of your surface. Perform an acid wash only if you have scale on the walls. I’d strongly suggest not performing a wash for algae, as chlorine will take care of that problem.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit