Q&A for How to Build a Robot Car

Return to Full Article

Search
Add New Question
  • Question
    Where can I get the parts needed?
    Community Answer
    Community Answer
    From any electronics shop, hobby shop, or scrapyard near you. You can also cannibalize your electronics for parts.
  • Question
    How much does building a robot car cost?
    Community Answer
    Community Answer
    In my experience, $20 to make a simple one. About $60 if you want to make an amazing robot car.
  • Question
    Can these cars be controlled by a remote?
    Community Answer
    Community Answer
    Yes, but you need to change the settings a bit. You will need to connect it with the remote.
  • Question
    Can we make a remote to control the car?
    Community Answer
    Community Answer
    Yes, you can use a remote to control the car but you need to have a radio transmitter and a receiver.
  • Question
    How do I cut the wires without hurting myself?
    Community Answer
    Community Answer
    You can use a wire stripper to cut and remove the covering of the wires. You can also simply use a pair of wire cutters. Do not use scissors. Not only will you ruin the scissors, but you are also likely to hurt yourself.
  • Question
    Where can I get these items?
    Community Answer
    Community Answer
    You can go to your nearest electronics shop and buy these. Or you could order them on Amazon or elsewhere online.
  • Question
    Am I supposed to add wheels to the other end of the car?
    Community Answer
    Community Answer
    The wheels are to be attached to the motor sender on the outer side of chassis.
  • Question
    Can the car be controlled with a remote?
    Community Answer
    Community Answer
    Yes it can, but you have to change the settings, that is, if the audio is removed and the wire of remote is attached to a motor circuit board.
  • Question
    Where can I find an aurdino device?
    Community Answer
    Community Answer
    Look on Amazon or from the arduino website directly. The arduino UNO is cheaper than the other models and is usually sufficient for beginner use.
  • Question
    Since most of the times Python is interpreted, does it mean only a programmer will be able to drive a car?
    Doggo
    Doggo
    Top Answerer
    The code can be simplified, or you can make a GUI. Simplifying the code can be done within a day or so while a GUI can take longer depending on your preference.
  • Question
    Can I use a soldering iron if I'm a kid?
    Community Answer
    Community Answer
    It would be best to get help from an adult, as soldering irons are very dangerous if used improperly.
  • Question
    Can I build my own remote?
    Community Answer
    Community Answer
    Yes, but you would need an antenna/receiver on the car.
  • Question
    What do I do if my motor driver doesn't have wires attached?
    Community Answer
    Community Answer
    You will have to solder them on. This is very dangerous, so you may need to ask someone to do it for you.
  • Question
    Can I customize my robotic car?
    Community Answer
    Community Answer
    Yes. It's your car, so do with it as you please.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

Return to Full Article