Q&A for How to Remove the "Twinkle" Feature from Christmas Lights

On a strand, there are usually multiple braided cords to bring power to the lights. If only 1/3 of the whole thing is off, it might just be a burned-out bulb or broken wire on that wired sequence.

There may be some sort of pulsing power supply attachment you could get to make normal lights blink, otherwise you may just have to buy the ones that blink.

Try the adapter going to the wall, or the far end; you can find a switch that makes them blink if they are solar; however, if they are electric, you may have to buy a dimmer switch/adapter.

Remove the plug from the outlet. You need to find the white bulb with a red tip in the chain of lights on the line strip and remove it and place in another colored bulb and plug it back in again. This stops from the lights to "Twinkle".

Yes, you can take out any bulb and replace that empty socket with a clear glass bulb with a red tip on it. Doing this will cause your lights to twinkle and blink.

You can do this if your lights have adjustable settings. There should be a dial (usually on the plug) that you can turn to make them light up in different patterns. Try out every setting until you find the one you want.