PDF download Download Article PDF download Download Article

When you visit a loved one in the hospital, you're likely to find your eye drawn to the monitor at their bedside. If you're wondering what all those wavy lines, numbers, and abbreviations mean, you've come to the right place! Read on to learn how to read and understand the patient monitor so you'll know what all those values can tell you about your loved one's condition. And if you have any questions or concerns, don't hesitate to ask a doctor or nurse on duty.

Things You Should Know

  • Read the numbers on the right-hand side of the monitor to learn the patient's pulse rate, body temperature, and blood pressure.
  • Use the respiratory and oxygen saturation rates to keep tabs on the patient's breathing and circulatory system.
  • Watch the waveforms for any signs of irregular heartbeat or breathing.
1

Pulse rate (PR)

PDF download Download Article
  1. This number is typically in the top right-hand corner of the monitor screen and tells you how fast the patient's heart is beating. The number might go up when the patient sits up, talks, or moves around.[1]
    • Someone who is injured or ill is likely to have a higher resting pulse rate than normal, but this is usually no cause for alarm. The monitor will issue an alert if the number gets too high.
    • Athletes who do a lot of cardiovascular training, such as cyclists or long-distance runners, might have a normal resting pulse rate of around 40 beats per minute.[2]
  2. Advertisement
2

Body temperature (TEMP)

PDF download Download Article
  1. This is typically the second number you'll see on a patient monitor, directly under the pulse rate. A body temperature over 99 °F (37 °C) is considered a fever, while anything below 95 °F (35 °C) is considered hypothermia.[3]
    • It's normal for a patient's body temperature to go up a degree or so if they're eating or active. Their temperature might also go down a degree or two if they're sleeping.[4]
3

Blood-oxygen level (SpO2)

PDF download Download Article
  1. This number is a percentage that tells you how much oxygen is in the patient's blood. Even a little below 95 is usually okay, but the patient might require supplemental oxygen if the number drops below 90.[5]
    • Oxygen saturation is typically monitored using a pulse oximeter, a small clip on the patient's finger or toe.
    • The SpO2 number isn't always displayed on a patient monitor, but you'll usually see it if the patient is experiencing a respiratory condition, such as pneumonia or COVID-19.
  2. Advertisement
4

Respiration rate (RR)

PDF download Download Article
  1. Quite simply, this is the number of breaths the patient takes in one minute. A patient's respiration rate typically increases if they have a fever and might not be any cause for alarm. However, you do want to make sure the patient isn't having any difficulty breathing.[6]
    • If the patient seems to be having trouble breathing, such as if they're gasping for breath or breathing very shallowly, press the call button to have a nurse come and evaluate their condition.
5

Systolic blood pressure (SYST)

PDF download Download Article
  1. This number, together with the diastolic blood pressure number, is typically found in the bottom-right corner of the screen. Systolic blood pressure tells you the amount of force exerted on the patient's arteries at the moment when their heart is beating.[7] High blood pressure occurs with systolic blood pressure of 140 mm Hg or greater.[8]
    • A patient's systolic blood pressure is read together with their diastolic blood pressure—even though the numbers might appear separately, they're expressed as a single unit.
  2. Advertisement
6

Diastolic blood pressure (DIAS)

PDF download Download Article
  1. Diastolic blood pressure is the force exerted on the patient's arteries between heartbeats, or when their heart is at rest.[9] High blood pressure occurs with diastolic blood pressure of 90 mm Hg or greater.[10]
    • When you read a patient's blood pressure, express it as a ratio with the systolic blood pressure over the diastolic blood pressure. For example, if the monitor showed systolic blood pressure of 110 and diastolic blood pressure of 75, you'd say the patient's blood pressure is "110 over 75."[11]
7

ECG waveform

PDF download Download Article
  1. This is usually the top wavy line on the hospital monitor. You can think of it as an image of the pulse rate, which is displayed right next to it. Healthcare practitioners study extensively to learn how to read and interpret an ECG waveform. As the loved one of a patient, all you really need to know is that each spike or peak corresponds to a heartbeat. If the patient has a regular heartbeat, these spikes will occur the same number of little blocks apart from each other.[12]
    • The ECG on a patient's hospital monitor typically comes from lead II, electrodes attached to the patient's right arm and left leg. If the ECG shows any irregularities, doctors or nurses will confirm the issue by attaching additional leads.
  2. Advertisement
9

Respiration waveform

PDF download Download Article

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

  • Visiting a loved one in the hospital can be an overwhelming experience. Remember to take breaks to recharge. Most hospitals also have counseling services available if you need to talk to someone.[15]
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

  • Avoid focusing too much on a single number. Doctors and nurses will look at the vital signs together and take the context into consideration. A single number out of normal range usually isn't cause for concern.
  • If the monitor or another piece of equipment starts beeping, call a nurse to come and check it out.[16]
Advertisement

About This Article

Danielle Jacks, MD
Medically reviewed by:
Cardiothoracic Surgeon
This article was medically reviewed by Danielle Jacks, MD and by wikiHow staff writer, Jennifer Mueller, JD. Danielle Jacks, MD is a Cardiothoracic Surgeon at Asante Cardiovascular and Thoracic Surgeons in Medford, Oregon. She has over seven years of experience in general surgery, and completed her surgical residency in 2021. In 2023, she completed a fellowship in Cardiothoracic Surgery at the Ochsner Clinic Foundation in New Orleans, Louisiana. She received her MD from Oregon Health and Science University in 2016. This article has been viewed 508,420 times.
73 votes - 96%
Co-authors: 7
Updated: September 28, 2024
Views: 508,420

Medical Disclaimer

The content of this article is not intended to be a substitute for professional medical advice, examination, diagnosis, or treatment. You should always contact your doctor or other qualified healthcare professional before starting, changing, or stopping any kind of health treatment.

Thanks to all authors for creating a page that has been read 508,420 times.

Reader Success Stories

  • Jennifer Molina

    Jennifer Molina

    Mar 7, 2023

    "As I'm watching the monitor I'm better able to understand what's going on. And this article enabled..." more
Share your story

Did this article help you?

Advertisement