PDF download Download Article PDF download Download Article

There are a lot of methods and products to remove algae from a pond, but which ones are safe for the fish swimming below? Algaecides contain harsh chemicals that you’ll want to avoid, but thankfully there are a variety of safer ways to clear up algae. We’ve put together a thorough list of effective ways to remove stringy and microscopic algae from a pond without harming fish, as well as simple prevention methods to keep the algae away. If you’re ready to clear up your pond, read on!

1

Rake out the algae.

PDF download Download Article
  1. Just grab a rake or skimming tool and manually remove as much algae as you can from the surface of the water. If your pond has a rubber pond liner, use a plastic rake to avoid accidental tears (a metal rake can be used with a concrete liner).[1]
    • Raking works best on string or matted algae (string algae looks like long green hair, and matted algae looks like a spongy mat of string algae).
    • Take care not to bump any fish near the surface with your rake. Otherwise, they’ll remain safe and sound!
    • To manually remove algae from a rock or pond wall, scrub the algae off with a firm brush (avoid wire brushes so you don’t scratch your rocks).
    • This is a short-term solution that doesn’t prevent more algae from growing back.
  2. Advertisement
2

Add barley straw to your pond.

PDF download Download Article
  1. Buy straw from a farm-supply or feed store (it’s more economical than buying online). Submerge a bundle of it in the pond and let it float around near the center. As the straw breaks down it releases organic compounds that kill algae.[2]
    • 8 ounces (230 g) of barley straw can treat about 1,000 gallons (3,800 L) of water.
    • For smaller ponds, buy a mini-bale, pellet, or liquid version of barley straw.
    • Research suggests this works better for green algae (a pea-soup looking algae caused by microscopic plankton) than string or matted algae.
    • Barley straw is organic and eco-friendly—perfect for ponds with fish in them.
3

Use a beneficial bacteria tablet.

PDF download Download Article
  1. Beneficial bacteria tablets are available at most pet stores and are fish-friendly. Place a tablet in your pond (on a plant or a rock) and let the little bacteria do their job. There are lots of different beneficial bacteria brands and products, so read the packaging for instructions on how much and how often to apply.
    • A 1 ounce (28 g) tablet works for 1,000 gallons (3,800 L) of pond water.
    • An initial dose in the spring will help prevent algae growth in the first place. Monthly or bi-weekly maintenance doses are usually recommended.
    • This works best in smaller ponds and is more effective when paired with an aeration system.
  2. Advertisement
4

Install an aerator or fountain.

PDF download Download Article
5

Buy a UV sterilizer.

PDF download Download Article
  1. A pet store sterilizer only generates enough UV rays to kill free-floating algae, so it’s harmless to your fish. Your pond may look brown or gray as the algae dies and decays, but it will eventually settle out and your water will be crystal clear.[5]
    • UV bulbs need to be replaced every 6-12 months (they get weaker over time).
    • UV treatments work best in clear water. Install it in springtime before the algae blooms or clear out as much algae as you can with other methods beforehand.
    • Don’t use a water clarifier to clean up the dead algae during your UV treatment since clarifiers can clump fishes’ gills together.
  2. Advertisement
7

Dye the water blue.

PDF download Download Article
  1. Blue is the most common dye—it’s harmless to fish and animals, but blocks the blue light algae needs. It works best if you apply it in the spring before an algae bloom and reapply during the summer according to the instructions.[7]
    • Aquatic pond dye can be found at most home improvement or pond shops. The amount you need depends on the volume of your pond (check the label of the dye to see how much water a bottle can treat).
    • Adding dye makes it harder to view fish and frogs in your pond than in clear water.
    • Blue dye is most effective at countering green and planktic algae.[8]
  2. Advertisement
8

Shade your pond with floating plants.

PDF download Download Article
  1. Plants like water lilies, fanwort, or watercress take away nutrients from algae and block sunlight from entering the water. Without food or light, algae can’t continue to grow. After a few weeks, your water will clear up and you’ll have some beautiful plants to look at, too.[9]
    • Add enough plants so that 50 to 70% of the pond surface is covered.
    • Pond-loving plants are available at gardening stores and nurseries. Ask about which plants grow best in your climate.
    • Add extra shade with umbrellas or sun sails around the sides of your pond.
9

Limit extra fish food in the water.

PDF download Download Article
  1. When uneaten food decays, it releases nitrates and phosphates—algae’s favorite food! To avoid this, only feed your fish as much as they can stomach in about 5 minutes. As soon as you notice they stop nibbling, stop feeding.[10]
    • Getting your fish on a consistent eating schedule can help reduce wasted or uneaten food.
    • When temperatures are consistently below 45 °F (7 °C), stop feeding your fish. Their metabolism slows way down in winter and they can live off of whatever organic matter is already in the water.
  2. Advertisement
10

Keep your pond debris-free.

PDF download Download Article
  1. Regularly clearing your pond of rotting organic matter cuts the algae off from a major food source. Use a rake, net, or skimming tool to manually remove unwanted debris from the surface. Go slowly and carefully to avoid bumping any fish.[11]
    • Siphon matter from the bottom of the pond away with a pond vacuum, still making sure to move slowly so you don’t spook the fish.
11

Build a buffer around your pond.

PDF download Download Article
  1. This will starve your algae by blocking their food supply. Create a wall of plants or a short (no more than 2 inches (5.1 cm) tall) stone or brick rim all around your pond. You can leave a few openings to access the water if you like, but it should be mostly surrounded.[12]
    • Buffers are completely fish-safe and add a nice decorative element to your pond, too.
    • Using plants as a border will attract all sorts of beautiful butterflies and birds to your pond.
    • A border will also stabilize the shore of your pond and prevent erosion over time.
  2. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you prevent algae in ponds?
    Scott Johnson
    Scott Johnson
    Landscape & Design Consultant
    Scott Johnson is the Owner and Lead Design Consultant for Concrete Creations, Inc., an award-winning landscape and design company based in the San Diego, California metro area. He has over 30 years of experience in the pool and landscape construction industry and specializes in large estate outdoor environment construction projects. His work has been featured in San Diego Home & Garden Magazine and on Pool Kings TV Show. He earned a BS degree in Construction Management with an emphasis in Architecture and CAD design from Northern Arizona University.
    Scott Johnson
    Landscape & Design Consultant
    Expert Answer
    Pond algae is caused by the sun, so you'll need to treat your water to prevent it from growing. Add an algaecide that's labeled as being safe for fish to the water. The best time to add the algaecide is April, but you can use it at other times, as well. Because the sun is out more in spring and summer, algae is most like to grow during this part of the year.
  • Question
    What is a safe algae control for ponds that contain fish we eat?
    Webbs Water Gardens
    Webbs Water Gardens
    Community Answer
    Any beneficial bacteria is safe in this case. There are liquids and dry versions.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

  • For many treatments, you’ll need to know the volume of your pond in gallons:[13]
    • For square or rectangular ponds, multiply the length times the width times the depth (all in feet) of your pond times 7.48 to get the volume in gallons.
    • For round ponds, measure the radius (half the diameter) in feet. Multiply the radius times the radius (again) times 3.14 (Pi) times the depth (in feet) times 7.48 for the volume in gallons.
  • Before and during algae blooms, rinse and clean your pond pump filter daily to remove algae faster. If your pump doesn’t have a filter, consider buying a universal pond pump filter box.
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

About This Article

Doug Ludemann
Co-authored by:
Professional Aquarist
This article was co-authored by Doug Ludemann and by wikiHow staff writer, Dan Hickey. Doug Ludemann is the owner and operator of Fish Geeks, LLC, an aquarium services company based in Minneapolis, Minnesota. Doug has worked in the aquarium and fish-care industry for over 20 years, including having worked as a professional aquarist for the Minnesota Zoo and Shedd Aquarium in Chicago. He received his Bachelor of Science in Ecology, Evolution, and Behavior from the University of Minnesota. This article has been viewed 56,358 times.
41 votes - 80%
Co-authors: 6
Updated: April 25, 2024
Views: 56,358
Categories: Ponds
Thanks to all authors for creating a page that has been read 56,358 times.

Did this article help you?

Advertisement