How to Remove Old Decals

Co-authored by Chad Zani

Last Updated: March 29, 2022

Using decals can be a fun way to express creativity and individuality, but they can also be tough to remove. When you’re ready to get rid of your old decal, you can remove it successfully without leaving any marks, scratches, or residue. Clean the area well before and after and remove the decal with heat and friction to have the best results.

Part 1

Part 1 of 3:

Leading Up to Removal

Download Article

Fill a small bucket with warm water and add a couple squirts of liquid dish detergent or laundry soap. Dunk a sponge in the bucket and rub the area well to ensure that no dirt or grime interfere with the decal’s ability to separate.^{[1]
X
Research source}
Pour some fresh, clean water over the area to remove any suds. With a clean microfiber cloth, thoroughly rub the decal and the area around it dry until there are no more traces of soap or water. You can also just let it air dry for several minutes if you’re willing to wait a while longer.

Advertisement
Take a good look at the sticker and try to figure out where its weaker spots are. If, for instance, one of the corners of the decal is already lifting up a little on its own, start pulling away at that corner.

Part 2

Part 2 of 3:

Getting the Decal off

Download Article

Plug in your hair dryer and put it on the hot setting. Hold the hair dryer a couple of inches away from the decal and start by keeping it aimed at the center for a few seconds. Then, slowly move to the other parts of the decal.^{[2]
X
Research source} Continue this for several seconds until the decal is warm to the touch.
After you’ve put the hair dryer away, it may be a good idea to apply a safe oil or alcohol-based substance to further influence the decal’s edges. Gently rub the substance on the corners.
3
Peel or scrape away the decal. Use your fingernail, a rubber spatula, or and angled old credit card to carefully peel or scrape away the decal. If there is a clear weak spot on your decal, make sure to start removal there.
- Unless you’re using it to remove a decal from a window, don’t use a razor blade. When not used extremely carefully, a razor blade may create permanent scratches to your painted surfaces.^{[3]
  X
  Research source}

Part 3

Part 3 of 3:

Cleaning Up After the Decal

Download Article

There may be leftover glue residue that you’ll want to get rid of. You can go to any automotive parts supply store to purchase a remover product that will get the job done safely. Put a dab of the product on a microfiber cloth and rub it onto the residue. Let it sit for about one minute before wiping it off with soapy water. Repeat this process until the residue is gone.^{[4]
X
Research source}
Again, use a little friction with a sponge and warm, soapy water to make sure any leftover dirt is removed from the surface.^{[5]
X
Research source} Dry the area again with a microfiber cloth.
Finally, buff the spot where the decal was with a polishing compound and a fresh coat of wax. You can find both of these products at an automotive parts supply store. This will help remove any remaining discoloration and also protect the area.

Expert Q&A

Search

Add New Question

Question

How do you remove stubborn vinyl decals from a car window?

Chad Zani
Auto Detailing Expert
Chad Zani is an Auto Detailing Expert based in Los Angeles, California. He is the Director of Franchising at Detail Garage, an automotive detailing company with locations around the U.S. and Sweden. He and his team are auto detailing experts that offer detailing and car care services.

Chad Zani

Auto Detailing Expert

Expert Answer

Use a razor to remove the decal. If there's glue residue leftover, grab a clean razor and scrape it off. A quick decal spray or glass cleaner can help with that, since they'll act as a lubricant for the razor.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 4
Question

How do I remove vinyl wall stickers in room? If I removed it, can I paste it again?

Community Answer

Heat softens vinyl. Using a paint heat gun (carefully) held about 8-11 inches away on the low setting, let the decal come up to a warm-hot temp. Do not touch with bare fingers, use a small flat screwdriver or a flat wood stick to gently nudge an edge to see if it is soft enough to lift away from the wall on its own. Do not overheat the wall, as this can cause a fire. As for reusing the decals, I do not think you can.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 1