How to Get a Splinter Out

Splinters are often small, but they can still be quite painful. Splinters can also be difficult to remove. If a splinter is large or severe enough, then you may need to seek medical attention to have it removed. However, if you just have a small splinter that is causing you pain and frustration, then there are some different strategies you can use to remove your splinter and to care for the wound as well.

How do you remove a prick, thorn, or splinter?

Wash off the injured area and remove the splinter with a pair of sterilized tweezers. For more fragile splinters (like fiberglass), use a piece of tape instead.
Alternatively, pour white school glue on the splinter and let it dry. Then, peel away the dried glue to get rid of the splinter.
Squeeze the splinter wound delicately until you see drops of blood. Then, disinfect and bandage the wound so it doesn't get infected.
Visit a doctor if your splinter is severe, or if the splinter is in a delicate area, like the eye.

Method 1

Method 1 of 5:

Tweezer Removal

Download Article

1
Wash the affected area. Before you begin removing a splinter,
wash your hands and the skin around the splinter with warm water and soap.
This can minimize the risk of spreading bacteria that may cause an infection.^{[1]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- You can wash your hands with mild soap and some warm water for 20 seconds.^{[2]
  X
  Trustworthy Source
  
  Mayo Clinic
  Educational website from one of the world's leading hospitals
  
  Go to source}
- You can wash the affected area with mild soap and water or use an antibacterial wash.
- Dry your hands and the area around the splinter well before you try to remove it.
Before you use your tweezers, make sure that you disinfect them with rubbing alcohol to
reduce your risk of infection
or any bacteria that can spread inside the wound. Having bacteria in the wound can cause an infection.^{[3]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}

Ways to Sterilize Tweezers
Rubbing alcohol: Let the tweezers sit in a bowl or cup of rubbing alcohol for a few minutes, or use a sterile cotton ball to wipe the tweezers with rubbing alcohol. You can get rubbing alcohol at pharmacies and many medical supply stores. Grocery stores and large retailers also sell rubbing alcohol.
Heat: If you’re short on time, but need to quickly sterilize your tweezers, hold the tip of the tweezers (the part that’s going to touch the injury) over an open flame. If your tweezers are metal, use another instrument to suspend them over the flame so you don’t burn yourself.
Boiling water: If your tweezers aren’t made of metal and they will likely melt under a flame, place them in a pot of boiling water for 20 minutes.

Advertisement
3
Use a magnifying glass and good lighting. Consider using a magnifying glass when removing the splinter. This may help you see the splinter more clearly and reduce the risk of injuring your skin further.^{[4]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- At the least, make sure that you remove the splinter in a well-lit area to help you see it better.
4
Break and lift the skin over the splinter if necessary. If the splinter is covered by a flap of skin, then you can
use a sterilized needle to break the skin and lift the flap.
Sterilize a needle by soaking or wiping it with rubbing alcohol. Then, use the needle to break and lift the skin flap that rests over the splinter. This will make it easier for you to grab the splinter and remove it.^{[5]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- If you have to dig deep to break the skin or see the splinter, consider going to the hospital or your doctor to reduce your risk of injury.
5
Grasp the splinter with tweezers. Once you’ve exposed the splinter’s tip, grasp it near the surface of your skin with your tweezers.
Gently pull out the splinter in the direction that it entered your skin.^{[6]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- If you have to dig deeper with your tweezers to get at the splinter, you may want to see your doctor to remove it.
- If part of the splinter breaks off, you may need to either see a doctor or try re-grasping it with your tweezers.

Method 2

Method 2 of 5:

Tape Removal

Download Article

1
Get some tape. Fragile splinters, such as those from plants or fiberglass, often respond well to removal with tape. You can use many different types of tape for this procedure including masking tape, duct tape, or electrical tape. You will only need a small piece of tape.
- Make sure that the
  area around the splinter is clean and dry
  before you apply the tape.
- Wash and dry your hands before you get started as well.
Apply the tape to the splinter site and press it firmly to make it stick to the splinter. Make sure that you do not press the splinter deeper into your skin as you do this.
Apply pressure out and away from the entry point of the splinter.
After you are sure that the tape is making contact with the splinter, pull off the tape. Peel away the tape slowly in the same direction that the splinter entered your skin. As you pull on the tape, the splinter should stick to the tape and come out.
After you have removed the tape, check it to see if the splinter is stuck to it. You should also check your skin to see if any part of the splinter is still embedded in your skin. If you still have all or part of the splinter, then you can repeat this process or try a different method.

Method 3

Method 3 of 5:

Glue Removal

Download Article

1
Apply glue to the splinter. You can also use glue, such as white school glue, to remove a splinter. Just apply a layer of glue to the splinter and surrounding area.^{[7]
X
Research source} Make sure that the glue is thick enough to fully cover the splinter.
- Do not use instant glue. This may not come off of your skin and trap the splinter in your skin instead of removing it.
- You can also try using a wax hair remover or wax strips the same way that you would use glue.
- Wash and dry your hands and the area around your splinter before you begin.
The glue must dry completely before you can remove it or it may not stick to the splinter. Leave the glue on your skin for about
30 minutes to an hour.
Check it now and then to see if it is dry yet. When the glue is dry, it should not feel tacky or wet.
After you are certain that the glue is dry, grasp the edge of the glue and pull it in the direction that the splinter entered your skin. Pull slowly and evenly. As you pull at the glue over your splinter, the splinter should come out.
After you have peeled away the glue, look at the glue to see if the splinter is stuck in it. You should also check to see if any parts of the splinter are left in your skin. If so, then you may need to repeat the process or try a different splinter removal method.

Method 4

Method 4 of 5:

How to Care for a Splinter Wound

Download Article

1
Squeeze the wound gently. When you’ve successfully removed the splinter, gently squeeze it until you see some blood. This will help to get some of the germs from the splinter out of your wound.^{[8]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- Don’t squeeze too hard. If the wound doesn’t bleed with some gentle pressure, just leave it alone. You can use other methods to clean away germs and bacteria, including an antibacterial ointment.
- Flushing the wound out with warm water for at least a minute will help clean the area.
If the splinter continues to bleed after squeezing it or is bleeding on its own, then you can control the bleeding by placing pressure on the area.^{[9]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source} This can help prevent significant blood loss and shock.^{[10]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source} Bleeding from a minor wound should stop within a few minutes. If you are bleeding excessively, or the bleeding won’t stop, then seek medical attention right away.

How to Control Bleeding
Using a dressing: Try holding a piece of gauze or a cotton ball on the splinter wound until the bleeding stops.
Holding skin together: If the wound has split the skin, bring the edges of it together by pressing them together with two pieces of sterile gauze or clean cloth.^{[11]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
Elevation: You can also raise the injured area above your heart, which can help to control bleeding.^{[12]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source} For example, if the splinter was in your finger, then raise your hand above your head until the bleeding stops.
3
Disinfect the area. Wash the splinter wound with soap and warm water after you’ve removed the splinter from your skin. This will help to clean away any lingering bacteria and germs left in the wound. After you are done, you may also want to apply an anti-bacterial ointment.^{[13]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- Apply an
  antibacterial ointment to the area up to twice per day.
  This can minimize the risk of infection to the affected area.^{[14]
  X
  Trustworthy Source
  
  Mayo Clinic
  Educational website from one of the world's leading hospitals
  
  Go to source}
- You can purchase an antibiotic ointment such as bacitracin, neomycin, or polymyxin B. Many brands will put the three into one product and call it “triple antibiotic ointment.”^{[15]
  X
  Trustworthy Source
  
  Mayo Clinic
  Educational website from one of the world's leading hospitals
  
  Go to source}
After the bleeding has stopped and the wound is clean, you may want to cover the area to prevent bacteria from getting into the wound. You can secure a piece of gauze with some medical tape or apply a bandage to the injured area. A bandage may also add some pressure to help control bleeding.^{[16]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}

Method 5

Method 5 of 5:

When to Get Medical Help

Download Article

1
Decide if you should remove your splinter at home or see a doctor. Small splinters that are just under the surface of your skin are safe to remove at home.^{[17]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source} However, there are some situations where it may be necessary for a medical professional to remove your splinter.
- If you are unsure about the nature of the splinter or it is causing you extreme pain, see your doctor as soon as possible.^{[18]
  X
  Trustworthy Source
  
  Mayo Clinic
  Educational website from one of the world's leading hospitals
  
  Go to source}
- See your doctor for a splinter that is
  more than a quarter-inch (or half-centimeter) deep, as well as a splinter that is penetrating into muscles or by/on nerves.
2
See your doctor or get emergency medical help for a severe splinter. If your splinter is deeply embedded, causing severe pain, won’t come out, or even if you are reluctant to remove it yourself, see a doctor as soon as possible. This can help minimize your risk of serious infection or injury. Also see your doctor if:^{[19]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source}
- The splinter involves the eye.
- The splinter will not come out easily.
- The wound is deep and dirty.
- Your last tetanus shot was more than five years ago.
If you start to experience any signs of infection from the site on which you removed the splinter, see your doctor immediately. They can prescribe a course of treatment and remove any lingering bits of the splinter that you were not able to see.^{[20]
X
Trustworthy Source

Mayo Clinic
Educational website from one of the world's leading hospitals

Go to source} Signs of an infection include:

Signs of Infection
Drainage from the site
Throbbing at the injury site
Redness or red streaks on the area
Fever or sweating
Muscle spasms
Headache
Muscle stiffness or pain^{[21]
X
Research source}
4
Consider leaving the splinter alone. If your splinter is tiny and not causing any pain, you may just want to leave it in your skin.
Your skin may push out the splinter on its own.
Your skin may also form a little pimple around the splinter and drain it this way.
- Keep the area clean and watch for signs of infections. If you see any redness, feel heat, or the area becomes painful, see your doctor.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Using a little bit of preparation H on the affected area can reduce the swelling and redness thus minimizing the discomfort to a small degree.

Thanks
Helpful 4 Not Helpful 0
Put the splinter in hot water then pull it out.

Thanks
Helpful 5 Not Helpful 1
Use your tweezers, cuticle cutters, or whatever you have around the splinter, because the pushing of the skin will push it down, leaving the middle skin pushing up. Make sure its clean.

Thanks
Helpful 3 Not Helpful 2

Show More Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

If you do it the wrong way, you can get the splinter deeper in and may need an adult or doctor to get out.

Thanks
Helpful 5 Not Helpful 0
Make sure to keep the splinter site clean to help minimize the risk of infection.

Thanks
Helpful 4 Not Helpful 1