PDF download Download Article
Keep your fridge sealed tight with this basic gasket replacement
PDF download Download Article

Have you noticed your fridge running more frequently or not feeling as cold as normal? One of the most common culprits is a damaged rubber seal (gasket) around the outside of your fridge door. A door seal replacement is one of the easiest repairs for a fridge, and you can do it on your own. Keep reading, and we’ll help walk you through everything you need to know for removing the old gasket and installing a brand new one.

Things You Should Know

  • Lift the edge of the fridge door seal and unscrew the screws on the metal retainer.
  • Pull the seal up and away from the fridge door to remove it.
  • Buy a new seal from your fridge’s manufacturer that matches your model number. Press the new gasket into the door’s groove and screw it back down.

Get Product Support Solve Any Problem

wH
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Part 1
Part 1 of 3:

Knowing When to Replace Door Seals

PDF download Download Article
  1. Open your fridge and look at the rubber seal around the perimeter of the door. If you notice there are any large cracks or holes in the rubber, it’s time for a replacement.[1]
    • If you notice any mold on the gasket, it’s a good sign there’s damage that might not be visible.
    • Fridge gaskets keep cold air in and heat out of the refrigerator. If your seal has cracks or damage, temperatures in the refrigerator could increase and cause food inside to spoil more quickly. It will also cost you more money in energy.
  2. Put the dollar bill between the refrigerator door and refrigerator, and close the door on it. Then, try to pull the bill straight out from the seal. If you feel the dollar drag slightly, your gasket is still in good condition. If the bill slips out quickly or has moisture on it, then it’s time for a door seal replacement.[2]
    • Alternatively, check for additional ice or moisture buildup inside your fridge and freezer. Moisture forms when warm air from outside leaks into your fridge through the seal and condenses into water droplets. Fixing the seal will help prevent ice build-up.
    • If you don't see any problems but your fridge still isn't working properly, check other fridge components like the condenser to see if they're working properly.
    Advertisement
  3. Try fixing minor cracks in an old gasket with silicone sealant. Apply a bead of silicone sealant along the edge of the crack. Slowly close the refrigerator door and leave it shut overnight. Check the door seal again in the morning to see if the sealant filled in the crack.[3]
    • Silicone sealant only works for fixing minor cracks, and it’s not a permanent solution. More cracks and gaps will eventually form in the door seal, so you’ll need to replace it then.
  4. Advertisement
Part 2
Part 2 of 3:

Getting & Prepping a New Seal

PDF download Download Article
  1. Check your refrigerator’s manual or look for a sticker inside of your fridge to find the exact model number. Look for a new gasket at a hardware store or on the manufacturer’s website and ensure the one you get matches the size of your door.[4]
    • Fridge door seals usually range from $30–50 USD
    • If you can’t find your owner’s manual, search your fridge’s make and model online to find the correct gasket.
  2. Lay the gasket flat on the floor or a table. If any areas look twisted or raised, tape them down so they lie flat. Leave the gasket in place for at least 1 day so it has time to flatten out into the proper shape.[5]
    • Alternatively, set lightweight objects on the gasket to hold it in place. Just make sure the objects aren’t so heavy that they squish the gasket down.
  3. Heat up a bowl of water in your microwave so it’s warm but not boiling hot. Slowly dip the warped section of the door seal in the water and leave it submerged for a couple of minutes. Then, rub the gasket with your fingers to help straighten out the rubber. Dry the gasket off completely before you install it.[6]
    • Warming the gasket makes it more malleable so it’s easier to reshape.
  4. Advertisement
Part 3
Part 3 of 3:

Replacing the Seal

PDF download Download Article
  1. Unplug your fridge to save energy while you work, then open your fridge door and grab the bottom inside edge of the gasket. Pull the gasket back to see if there’s a metal retainer, which is a flat piece screwed into the fridge door. If there’s a retainer with screws, then have a hex-head screwdriver ready.[7]
    • If there isn’t a metal retainer, then the gasket will come off of your fridge door easily.
  2. Lift the edges of the seal to find the screws underneath. Turn the screws counter-clockwise to loosen them slightly. Just make sure not to completely take the screws out so you don’t lose them. Work your way around the entire door removing the screws.[8]
    • The screws secure the gasket between a plastic door liner and the actual fridge door.
  3. Once all of the screws are loose, hold the door’s seal by one of the corners. Pull the corner up and away from the fridge door so it easily slides out from behind the plastic liner. Just be careful not to be too forceful since some plastic liners are quite brittle and could break if you’re too rough.[9]
    • If the seal is stuck or glued onto your fridge door, slide a putty knife underneath to help loosen it.
    • Toss the old gasket in the trash or contact your local waste collection service to see if you can recycle it.
  4. Position one of the gasket’s corners on the top of the refrigerator door. If your fridge door has a metal retainer, push the lip of the new gasket behind the retainer. Otherwise, use your thumb to push the gasket into the recessed groove around the perimeter of the refrigerator door.[10]
    • It’s okay if the gasket doesn’t sit perfectly flush right away since you’ll be able to make slight adjustments to fix any warps.
  5. If the lip doesn’t slide into the groove around your fridge door, push it in a flathead screwdriver. Slide the end of the screwdriver between the door and the liner. Hold the gasket down with your other hand before taking out the screwdriver so the seal doesn’t come out with it.[11]
    • After you put the screwdriver in behind the liner, pry it forward slightly to help the gasket slip in.
  6. Turn the screws clockwise to tighten them until they feel snug. Go around the perimeter of your refrigerator door to secure all of the screws.[12]
    • Avoid forcing or over-tightening the screws so you don’t damage the liner.
  7. Apply baby or talcum powder around the door seal. Shake a little bit of the powder into your hand and rub it around the sides and corners of the new gasket. The powder helps reduce friction and prevents the door seal from twisting when you open and close the door.
  8. Rub petroleum jelly on the seal along the hinged side of the door. Take a fingertip-sized amount and spread it over the gasket’s surface on the side with the hinges. Spread the petroleum jelly in a thin, even layer.[13]
    • Petroleum jelly helps the door seal slide against your fridge when you open and close the door so it doesn’t twist or warp.
  9. Slowly close your fridge and inspect the gasket for any warped areas. Run your finger around the edge of your fridge door to make sure the seal sits flush against your fridge. Then, open the door to ensure the seal doesn’t drag or twist against the fridge.[14]
    • If you notice warps in the gasket, try heating the rubber with a hair dryer on low heat to make it fit against your fridge better.
  10. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can you fix the seal on a refrigerator?
    Aaron Beth
    Aaron Beth
    Appliance Technician
    Aaron Beth is the founder of Aaron’s Refrigeration Company in New York City and a factory certified installer (FCI) for Sub-Zero products. He specializes in the service and maintenance of built-in refrigerators, wine coolers and ice machines. With over 54 years of experience, Aaron is the recipient of numerous Super-Service awards from Angie’s Lists and 2019 Best-of-the City.
    Aaron Beth
    Appliance Technician
    Expert Answer
    Most seals are made out of vinyl, so when they split or tear, it's difficult to repair. It's best to just replace the seal if you can.
  • Question
    My replacement gasket has a twist in it. How do I get it out?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Lay the gasket flat and tape down any twisted spots. Leave the gasket for 1–2 days until it lies flat. If you already installed the gasket, try heating it with a hair dryer and reshaping it.
  • Question
    How can I order for refrigerator gasket on line and what is the cost of it?
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    wikiHow Staff Editor
    Staff Answer
    Get a gasket that matches the model of your fridge. A new one costs anywhere from $30–50 USD.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!

Things You'll Need

You Might Also Like

Replace a Door SillReplace a Door Sill
Make a Refrigerator Door CloseMake a Refrigerator Door Close
Deep Cleaning a Fridge: How to Remove Odors, Mold, & Residue
Arrange Refrigerator ShelvesArrange Refrigerator Shelves
Test an Evaporator Fan MotorTest an Evaporator Fan Motor
Set Your Refrigerator Temperature Adjust Your Fridge to the Right Temperature
Stop a Fridge from Ice Build Up3 Ways to Stop & Prevent Ice Build Up in Your Fridge & Freezer
Put Freon in a RefrigeratorPut Freon in a Refrigerator
Level Your Refrigerator Level a Refrigerator (With Leveling Feet or Rollers)
Change the Side on Which Your Refrigerator Door OpensChange the Side on Which Your Refrigerator Door Opens
Move a Refrigerator Move a Fridge (For Cleaning or a Long-Distance Move)
Test a Refrigerator PTC RelayTest a Refrigerator PTC Relay
Refrigerator Freezing FoodWhy Your Refrigerator Is Freezing Your Food (And How to Fix It)
Defrost Samsung Ice Maker Defrost a Samsung Ice Maker: A Quick Guide
Advertisement

About This Article

Aaron Beth
Co-authored by:
Appliance Technician
This article was co-authored by Aaron Beth and by wikiHow staff writer, Hunter Rising. Aaron Beth is the founder of Aaron’s Refrigeration Company in New York City and a factory certified installer (FCI) for Sub-Zero products. He specializes in the service and maintenance of built-in refrigerators, wine coolers and ice machines. With over 54 years of experience, Aaron is the recipient of numerous Super-Service awards from Angie’s Lists and 2019 Best-of-the City. This article has been viewed 974,094 times.
11 votes - 91%
Co-authors: 25
Updated: August 16, 2023
Views: 974,094
Article SummaryX

To replace the seal on your refrigerator door, start by submerging the new gasket in warm water so that it’s softer and more pliable. Then, remove the old gasket by lifting the edge up and turning the screws underneath. Once you’ve loosened the screws, pull off the old gasket and dispose of it. Next, take the new gasket out of the water and put it on the refrigerator door, pushing the lip over the metal retainer that holds the screws. Finally, tighten the screws in the retainer to secure the gasket. Read on to learn how to fix any gaps in the seal with petroleum jelly!

Did this summary help you?

Thanks to all authors for creating a page that has been read 974,094 times.

Reader Success Stories

  • James Harmon

    James Harmon

    Dec 1, 2016

    "Visited two other sites prior to yours via Google. One was nothing more than someone rambling on and on, often..." more
Share your story

Did this article help you?

Advertisement