PDF download Download Article PDF download Download Article

So you have a two-wheeled self-balancing scooter - now you want to learn how to ride it. Its super easy to learn and even easier than learning to ride a full size Segway! Get started with step 1 and you'll be smooth sailing in no time.

Part 1
Part 1 of 2:

Stepping On

PDF download Download Article
  1. (Don't worry if it doesn't include one, many brands don't).
    • The on button is normally a silver push kind, located on the back near the charge port.
    Advertisement
  2. If it doesn't, then charge it using the cable provided.
    • There is often a light 'next to the battery gauge, if it turns green then it is safe to put your second foot on, if it is red then turn off the board and try again. If the problem persists contact the supplier.
    • If the scooter moves its fine, just re-position and start again.
    • Keep going until you get it right.
  3. Advertisement
Part 2
Part 2 of 2:

Learning to Maneuver

PDF download Download Article
  1. You will turn.
    • It is very important to keep your other foot horizontal, if you don't do this then it will counteract the turn and may unbalance you.
  2. Most mini self-balancing scooters can handle slopes of up to 15 degrees,  although it does vary with brands.
  3. When you achieve top speed you will normally hear a beep. This tells you that you have maxed out the speed and should slow down.
    • Now you can start to do spins and go at decent speeds!
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Should I add lights in the front or back?
    Peter Betts
    Peter Betts
    Community Answer
    It doesn't matter which way. I ride with them at the front for personal protection, although putting them at the back could provide awareness for traffic. You could also add lights to both the front and the back.
  • Question
    How do I increase my speed?
    Community Answer
    Community Answer
    Lean forward! That will give you more speed as you ride.
  • Question
    What do the different flashing lights mean?
    Peter Betts
    Peter Betts
    Community Answer
    The lights normally go solid when pressure is applied to one side. If both sides of lights are solid, then pressure is on both sides. The lights flash when the battery is low, and very fast blinking could indicate that the board is not calibrated. The manufacturers may be able to provide detailed light sequence plans upon request.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

Show More Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

About This Article

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 31 people, some anonymous, worked to edit and improve it over time. This article has been viewed 61,314 times.
131 votes - 74%
Co-authors: 31
Updated: March 4, 2021
Views: 61,314
Categories: Scooters
Thanks to all authors for creating a page that has been read 61,314 times.

Did this article help you?

Advertisement