This article was co-authored by wikiHow staff writer, Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 1,598,234 times.
Learn more...
This wikiHow teaches you how to set a Baby G wristwatch's time. The time on both the digital and the analog-digital versions of the Baby G watch can be set using the same process, though your watch's extra features will vary depending on its model.
How to Set a Baby G Watch
To change the time, hold down the Adjust button until the numbers start flashing. Tap on the Mode button to switch between hours, minutes, and seconds, and use the Forward and Reverse buttons to change the time. Click the Adjust button again to set your watch.
Steps
-
Familiarize yourself with your watch's buttons. There are four main buttons on your watch. They may be labeled differently than below, but they all serve the same functions once you place your watch in edit mode:
- Adjust - Upper-left corner of the watch. Used to place your watch in edit mode.
- Reverse - Upper-right corner of the watch. Used to move back one value (e.g., a time zone, an hour, etc.).
- Forward - Lower-right corner of the watch. Used to move forward one value (e.g., a time zone, an hour, etc.).
- Mode - Lower-left corner of the watch. Used to cycle through options on your watch.
-
Press and hold the Adjust button for three seconds. This is the button in the upper-left corner of the watch's face. After three seconds, you should see one of the items on the watch's face begin flashing.[1]Advertisement
-
Press repeatedly the Mode button until the Seconds value begins flashing. The "Mode" button is in the bottom-left side of the watch face. Once the number that represents the number of seconds begins flashing, you can proceed.[2]
-
Reset the seconds to the current time. Press the Reverse or Forward button in the upper- or lower-right corner of the watch until the seconds match the current time (e.g., 30 seconds).[3]
-
Select the Minutes value. Press the Mode button again to select the number that represents minutes.
-
Change the Minutes value to a minute before the current time. You can do this by pressing the Reverse or Forward button.[4]
- Setting the minutes to a minute prior to the current time will allow the minutes to automatically synchronize when the seconds reach 60 again.
-
Select the "Hour" value. Press the "Mode" button again until the current hour is selected.
-
Change the "Hour" value to the current hour. Press the "Reverse" or "Forward" button to cycle to the current hour (e.g., 6).[5]
- If you're using 12-hour time on your watch, make sure that the time of day (represented by "AM" and "PM") is correct. If it isn't, you'll have to cycle through 12 times to get to the correct time.
-
Adjust any flashing options. You can press the Mode button to cycle through other options that you watch has to offer, and use the Reverse/Forward buttons to adjust them as needed:[6]
- Time zone - This will usually appear at the top of the watch's face. Keep in mind that the time zone will affect the current hour.
- DST - You can turn this on or off on supported watches. Doing so will allow your watch's time to reset based on daylight savings time.
- 12H or 24H - This setting will allow you to choose between 12-hour time (e.g., AM and PM) and 24-hour time (e.g., 06:00 for 6 AM, 18:00 for 6 PM).
- Light - On Baby G watches that have lights built in, you may be able to set a number of seconds for which the light displays.
- Date - You can usually adjust the month and day on supported watches.
-
Press the Adjust button. This will set your Baby G watch's time to match your selected time.[7]
- On some watch models especially analog-digital ones you may need to hold down Adjust for a couple of seconds before the time will set.
- Analog-digital models' hands will automatically adjust to match the digital time.
Community Q&A
-
QuestionHow do I illuminate the 3 smaller circular windows? The windows are so dark I cannot read the display.Community AnswerYou don't, sadly. The only thing you can do if you've had the watch for some time is get new batteries put in. My 3 windows faded to nothing so I had new batteries put in, I can now see the numbers again and they are not overly bright, but they are now visible.
-
QuestionHow do I stop the hourly beeping?Community AnswerYou need to turn the 'Sig' mode off. Press the mode button (located on the bottom left) several times until you have reach the option to view the alarms. Press on the 'Search' or bottom left button to go through all the alarms until you are at 'SIG'. Stop there and press on the 'Adjust' button (top left) to toggle the hourly beeping setting on or off.
-
QuestionHow do I set the alarm on a Baby G-shock?Community AnswerGo to the alarms and press on the adjust button once. However, holding on to it will adjust the alarm time, and it'll flash after a beep.
Video
Tips
-
Depending on the model of your watch, Casio may have the instruction manual available online. Use the 4-digit number on the back casing of the watch, or the model number, to search for your watch's online documentation.Thanks
-
Most Casio Baby G watches are more or less the same when it comes to setting the time, so these instructions should work for almost any style.Thanks
Warnings
- Some analog-digital Baby G watches have hands that may eventually stop moving in sync with the digital time. If this happens to your watch, you should take the watch into a repair service or department.Thanks
References
- ↑ https://support.casio.com/global/en/wat/manual/5556_en/UQIDSYdbnhqdju.html
- ↑ https://support.casio.com/global/en/wat/manual/5692_en/UQIDSYwrumpgsp.html
- ↑ https://www.casio.com/content/dam/casio/global/support/manuals/watches/pdf/53/5338/qw5338_EN.pdf
- ↑ https://www.casio.com/content/dam/casio/global/support/manuals/watches/pdf/53/5338/qw5338_EN.pdf
- ↑ https://www.casio.com/content/dam/casio/global/support/manuals/watches/pdf/53/5338/qw5338_EN.pdf
- ↑ https://support.casio.com/global/en/wat/manual/5692_en/UQIDSYwrumpgsp.html
- ↑ https://support.casio.com/global/en/wat/manual/5556_en/UQIDSYdbnhqdju.html
About This Article
To set the time on a Baby G watch, press and hold the top-left “adjust” button for a few seconds while you’re on the main time screen. Press the bottom-left “mode” button to switch between seconds, minutes, and hours, using the top and bottom buttons on the right to adjust the time. Press the mode button again to change the date, then press the top-left “adjust” button once more to lock in your time. Keep reading to learn how to change your time zone or to switch between a 12 and 24-hour display.