How to Sink the 8 Ball on the Break

Author Info

Last Updated: March 4, 2024 Approved

Sinking the 8-ball on the break requires a skilled, practiced shot. The breaker--the player that "breaks" the rack, or triangular formation of pool balls, with the white cue ball--aims to knock the 8-ball into a pocket on the opening shot. In some variations of pool, sinking the 8-ball on the break can lead you to an automatic victory over your opponent but be careful not to scratch, or pocket the cue ball!

Part 1

Part 1 of 3:

Preparing for the Game or Shot

Download Article

If you are playing against an opponent, agree upon a set of rules before racking the balls. In many versions of the game, pocketing the 8-ball on the break guarantees the breaker an automatic victory. However, if you pocket the 8-ball on the break and scratch the cue ball, you will automatically forfeit the game to your opponent.^{[1]
X
Research source}
Determine if you or your opponent will be the breaker. If you have trouble deciding, flip a coin or play [Play Rock, Paper, Scissors|Rock, Paper, Scissors.

Advertisement
3
Rack the balls. Place the rack on the table, situating the rack’s apex on the foot spot, and position the balls correctly inside the triangle. For a standard game of eight-ball pool, the 1-ball is placed at the rack’s apex and the 8-ball is located in the center of the triangle. One bottom corner must contain a solid and the other corner must contain a stripe—the numbers on these two balls do not matter. All other balls are randomly placed within the rack.
- Make sure the rack is tight--the balls should be close together.

Part 2

Part 2 of 3:

Placing the Cue Ball

Download Article

1
Determine if you will break from the right or the left side. If you are right-handed, you may want to try breaking from the left side of the table. If you are left-handed you may want to try breaking from the right side of the table.^{[2]
X
Research source}
- Try shooting from both sides of the table to figure out what is the most comfortable option for you.
2
Locate the head string. The head string is a line that goes across the table, from side rail to side rail. The line connects the second diamonds on the head end and passes through the head spot, a point equidistant from both side rails.^{[3]
X
Research source}
- Pool tables have four rails, or sides: a head rail, a foot rail, and two side rails.
- Pool tables are have two ends, the head end and the foot end.
- Pool tables have three strings, or imaginary lines: the head string, the center string, and the foot string. These lines are never drawn on the table.
- The head string is nearest the head rail. The area between the head rail and the head string is called the Kitchen. On the break, the cue ball may be placed anywhere within the kitchen or along the head string.
- The center string connects the pockets on the side rails.
- The foot string falls between the second diamond on the foot end. The foot string passes through the foot spot, a point that falls equidistant between the two side rails. The apex of the rack is placed on the foot string.
- Each end has three diamonds.
3
Place the cue ball. The cue ball’s exact placement depends upon the length of the table. If these placements aren’t working for you, try moving the cue ball along the side rail or towards the center of the table. Remember, the placement of the cue ball isn’t wrong if it works for you.
- For a nine foot table, place the cue ball one ball’s width away from the side rail you will be breaking from and three ball’s width from the head string (into the kitchen).
- For an eight foot table, place the cue ball one ball’s width away from the side rail you will be breaking from and two and one half ball’s width from the head string (into the kitchen).
- For a seven foot table, place the cue ball one ball’s width away from the side rail you will be breaking from and two ball’s width from the head string (into the kitchen.^{[4]
  X
  Research source}

Part 3

Part 3 of 3:

Sinking the 8-Ball on the Break

Download Article

Position your body, arms, and cue stick in line with the second ball on either side of the head ball. If you are breaking from the right, you will try to hit the second ball to the right of the head ball. If you are breaking from the left, you will try to hit the second ball to the left of the head ball.
2
Apply english, or sidespin. To sink the eight ball on the break, you need to apply english, or sidespin, to the cue ball. This is an advanced technique that affects the curve and throw of the cue ball. Imagine a clock face on the side of the cue ball facing you. If you are breaking from the right rail, use low left english—hit the cue ball at approximately 7:00. If you are breaking from the left rail use low right english—hit the cue ball at approximately 5:00.
- Mastering english requires a lot of practice. It is important to be patient while you work on developing this skill.
- Some experts recommend hitting the cue ball at 6:00, while others suggest hitting the cue ball at 6:30 or 5:30.
- Avoid hitting the head ball—it will cause the 8-ball to go in the wrong direction.
3
Hit the cue ball with a draw stroke. The draw shot is ideal when applying lower right or left english. This stroke causes the cue ball to reverse its path back towards you after it hits a pool ball—in your case the second ball to the right or the left of the head ball. Keep your cue level, your grip loose, and follow through with the tip of the cue down. The amount of force required will vary from person to person. While professional players break at about 36 mph (58 km/h), it is possible to make the shot by breaking at half the speed. Experiment with different amounts of force and remember that what works for you may not work for other people.
- This is an advanced stroke. Practice, practice, practice and be patient!
- The follow through is what causes the cue ball to roll back to you.
While the cue ball should come back towards you, the 8-ball should roll into the side pocket of the rail opposite of you.

Community Q&A

Search

Add New Question

Question

If the shooter sinks a stripe on the break, does he have to sink his next shot as well, or is the breaker stripes before the next shot?

Community Answer

Since the breaker made the striped ball on the break, which is a legal shot, he would be stripes.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 41 Helpful 5
Question

If I have one ball left and the other player scratches, and if my ball is behind the break line, what should I do next?

Community Answer

Try to bounce it off the back rail at an angle, if you have a shot. If not, just hit the ball to get it out of the kitchen.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 23 Helpful 4

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

This is a complicated, technical shot. Practice the skills individually. As you feel more confident, combine the techniques and practice sinking the 8-ball on the break.

Thanks
Helpful 7 Not Helpful 6
Don’t be afraid to experiment with the placement of the ball and the position of your cue stick.

Thanks
Helpful 3 Not Helpful 2