The 4 Easiest Ways to Tie Shoelaces

Download Article

Learn how to tie sneakers, boots, and more with this thorough guide

Co-authored by Kai Ng and Sophia Bell

Last Updated: March 12, 2024 Fact Checked

Download Article

• Basic Method
|
• "Bunny Ears" Method
|
• "Circle" Method
|
• "Magic Fingers" or "Ian Knot" Method
|
• Video
|
• Q&A

|Show more |Show less

ARTICLE

VIDEO

There are many ways to tie your shoes, and some may be easier than others. Whether you are trying to teach a child how to tie their shoes, or you're looking for a new technique, all you’ll need is a pair of patient hands and your favorite pair of shoes. Try the standard knot, or tie your shoes using the “bunny ears,” “circle method,” or “Ian knot” techniques.

Steps

Method 1

Method 1 of 4:

Tying a Basic Knot

Download Article

1. 1
   Place the shoes on a flat surface. Let the laces fall to either side of the shoe.

   • If you’re demonstrating this technique to someone, point the toe side of the shoe toward them so they can see your hand movements.
   • To make it easier for children, color the bottom of one shoelace brown, the middle part of the lace green, and the top part of the lace brown. This way, when you instruct them to make a loop with the lace, it can look like trying to form a “tree” by always making sure the green part of the lace is at the top of the loop, like the leaves at the top of a tree.
2. 
   2
   Tie a basic knot. Take both laces and thread one lace over the other and then pull them tight. They should form a knot in the middle of the shoe.
   Advertisement
3. 
   3
   Make a loop with one of the laces. You should be holding the lace between your thumb and your first two fingers.

   • If you are using the “tree” trick, instruct your child to form a loop with the colored lace so the brown parts of the lace are on top of each other (the trunk of the tree) and the green part sits at the top of the loop (the leaves of the tree).
4. 
   4
   Use your other hand to wrap the other lace around the loop. You should be holding it over your fingers and around the loop. Wrap the other lace toward you rather than away from you.

   • Again, if you are using the “tree” trick, instruct your child to wrap the shoelace with the knot over the “trunk” of the tree.
5. 
   5
   Pull the shoelace through the hole to form another loop. You should use your free hand to pull the shoelace through. There should now be a hole between the looped shoelace and the wrapped shoelace. Pull the wrapped shoelace through so it comes through this hole.

   • Another way to explain this is to have your child poke the knot on the shoelace through the hole to make another loop.
6. 
   6
   Hold both loops and pull them tight. You should now have a nicely tied shoe.

   • You can also instruct your child to pull the knot and the top of the tree trunk to either side, tightly.
Advertisement

Method 2

Method 2 of 4:

Using the "Bunny Ears" Technique

Download Article

1. 1
   Place the shoes on a flat surface. Let the laces fall to either side of the shoe.
2. 
   2
   Tie a basic knot. Take both laces and thread one lace over the other and then pull them tight. They should form a knot in the middle of the shoe.
3. 
   3
   Make a “bunny ear” loop with one of the laces. You should be holding the lace between your thumb and your first two fingers. The loop should be small and the “tail” should be long.
4. 
   4
   Make a “bunny ear” loop with the other lace. Hold the lace between your thumb and first two fingers. Make the “tail” long and the loop small.
5. 
   5
   Tie a basic knot with the “bunny ear” loops. Place one loop over the other, then tuck it behind the other and thread it through the hole that is created.
6. 
   6
   Pull the “bunny ear” loops tight. Now your shoes are tied nicely.
Advertisement

Method 3

Method 3 of 4:

Using the "Circle" Technique

Download Article

1. 1
   Place the shoes on a flat surface. Let the laces fall to either side of the shoe.

   • If you’re demonstrating this technique to someone, point the toe side of the shoe toward them so they can see your hand movements.
2. 
   2
   Tie a basic knot. Take both laces and thread one lace over the other and then pull them tight. They should form a knot in the middle of the shoe.
3. 
   3
   Tie another knot, but don’t tighten it. Keep the second knot loose. Notice there is a circle shape formed by the knot. Hold the circle shape with your hand and lay it flat against the shoe.
4. 
   4
   Thread one shoelace into the circle. Make sure it comes up through the circle and over to one side. You can keep it loose, but make sure it does not slide all the way out of circle.
5. 
   5
   Thread the other shoelace into the circle. It should come up through the circle and over to the other side of the shoe.

   • You should now have two loops on either side of the knot in the center of the shoe.
6. 
   6
   Pull the loops tight. Use your hands to pull the loops tight so they are secure. Now your shoes are tied.
Advertisement

Method 4

Method 4 of 4:

Using the "Magic Fingers" or “Ian Knot” Technique

Download Article

1. 1
   Place the shoes on a flat surface. Let the laces fall to either side of the shoe.

   • If you’re demonstrating this technique to someone, point the toe side of the shoe toward them so they can see your hand movements.
2. 
   2
   Tie a basic knot. Take both laces and thread one lace over the other and then pull them tight. They should form a knot in the middle of the shoe.
3. 
   3
   Grip one of the shoelaces. Use your thumb and forefinger on your right hand to grip one of the shoelaces. Your fingers should be facing toward you.

   • Make sure your pinky finger is also gripping the shoelace.
   • You should be making a half rectangle shape (or lobster claw shape) with your thumb and forefinger, as you grip the shoelace.
4. 
   4
   Grip the other shoelace. Use your thumb and forefinger on your left hand to grip the other shoelace. Again, your fingers should be facing toward you.

   • Don’t forget about your pinky finger. Make sure it is also gripping the shoelace. You should be making a half rectangle shape (or lobster claw shape) with your thumb and forefinger.
5. 
   5
   Pull your fingers towards each other so you feel some tension. Twist your fingers so they are facing each other.

   • It should look the the two halves of the rectangle or the two lobster claws are coming toward each other.
   • You should be forming an “X” shape with the laces.
6. 
   6
   Pull the laces through using your thumb and forefinger. Pinch the laces between your fingers and pull them tight. As you tighten the laces, you should now have two loops on either side of the shoe and a nice, clean tie in the middle of the shoe.
Advertisement

Community Q&A

Search

Add New Question

• Question

  My shoelaces keep coming untied. Why does this happen? Is there anything wrong with my tying?

  

  Community Answer

  If you are tying them using the "circle" method, there is a possibility you are pulling the loops too far out, which makes them come undone easier and quicker. Also, you may not be pulling the whole thing in tightly enough. If this persists, try the "bunny ears" method.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 172 Helpful 207
• Question

  What if I still don't know how?

  

  Community Answer

  Have someone show you personally, watch a YouTube tutorial video, or avoid shoes that require tying.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 253 Helpful 220
• Question

  Can I cut my shoe laces so I don't have to tie them?

  

  Community Answer

  You could, but your shoes might feel loose. You could also just buy some shoes that don't require laces.

  Thanks! We're glad this was helpful.
  Thank you for your feedback.
  If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow

  Yes No

  Not Helpful 148 Helpful 197

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Read Video Transcript

Tips

• If you are teaching yourself or a kid how to do this, don't do it all on one day. Try to do it for 10 minutes per day for a week or so.
  Thanks

  Helpful 49 Not Helpful 27
• Remember, practice makes perfect, so keep practicing your tying method and you’ll soon be able to do it quickly and easily.
  Thanks

  Helpful 35 Not Helpful 24
• Keep in mind there's no right or wrong way to tie your shoes. You can tie your shoes any way you'd like, as long as you're comfortable in your shoes and can walk without pain.
  Thanks

  Helpful 35 Not Helpful 27

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

• If one loop (or "bunny ear") ends up weak, check that both ears are the same length. Then, pull the loops tight with the same tension.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Advertisement