When and How to Trim Marijuana Plants

Download Article

Expert gardeners explain wet vs. dry trimming, when to prune your weed, and more

Co-authored by Luke Smith, MFA Reviewed by Ben Barkan

Last Updated: August 2, 2024 Fact Checked

Download Article

Prep & When to Harvest

|

Harvesting Buds

|

Encouraging a High Yield

|

Expert Q&A

|

Tips

|

Warnings

Trimming cannabis plants is something of an art. With all the right cuts, you’ll have a compact, high-yield crop, with extra trimmings left over for things like hash, extracts, or oils. Before you pick up those scissors and get to chopping, though, there are a few things you ought to know to get the most out of your Mary Jane. We’ll fill you in on the tools you need, how to trim when the time comes, and maintenance tips from gardening experts to help you grow the good stuff.

Trimming Cannabis

Trim your cannabis plant once the resin on the tips of the buds turns cloudy white or amber. Use gloves and a pair of clean garden trimming shears (or scissors) to clip away the large, 5-pointed fan leaves and any smaller sugar leaves that don’t hold any resin.

Method 1

Method 1 of 3:

Prep & When to Harvest

Download Article

The marijuana plant’s resin can be difficult to wash off, and handling it in large quantities without protection might contribute to developing allergies.^{[1]
X
Trustworthy Source

Centers for Disease Control and Prevention
Main public health institute for the US, run by the Dept. of Health and Human Services

Go to source} Slip on disposable rubber gloves to protect your hands from sticky buds.
2
Clean your trimming shears and scissors. Use trimming shears or scissors to cut away branches without straining the muscles in your hands.^{[2]
X
Research source} Disinfect your tools with isopropyl alcohol wipes to keep them ready to snip and avoid spreading pathogens between plants.^{[3]
X
Research source}Marijuana plants are fragile and can be sensitive to rough treatment. Take your time, and trim carefully.
- Your fingers are your third tool in your trimming arsenal—you’ll pluck away the plants’ tips with your gloved fingers.
- Some growers use machine trimming solutions, but specialized trimming machines are pricey and not typically practical for small-scale growers.
Advertisement
As you trim, don’t simply discard the leaves and other cuttings—these can be used to make edibles or hashish. Set out a few cookie sheets or other wide containers near the plants you’ll be trimming. Use 1 to catch trimmed buds, and others to collect discarded plant matter.^{[4]
X
Research source}
4
Trim your crop when the resin is cloudy or amber-colored. Wait to harvest until your marijuana plant has a cluster of cloudy white or reddish-brown hairs sticking out the top. These are the plant’s trichomes, which produce the THC-laden resin. As the plant ages, the resin on these trichomes changes from clear white to cloudy or amber (depending on the strain), which means your crop is ready to harvest.^{[5]
X
Research source}
- Note that the top of the plant tends to mature faster than the bottom, so you may need to harvest different areas of the plant at different times.
5
Perform a wet trim if your space is limited. There are 2 common methods of trimming: “wet” and “dry.” With a wet trim, you trim the plant right after harvesting, while it’s still hydrated. A wet trim makes it easier to prune leaves, speeds the drying process, and prevents mold from forming on your crop. It’s great for growers in a humid environment or with limited space that can’t fit industrial drying racks.^{[6]
X
Research source}
- A “dry” trim, on the other hand, is performed after the plant has been hung and dehydrated.
- A dry trim preserves the bud’s shape and is generally less sticky. Because the plant is dry, though, you need to be extra careful not to crinkle off any trichomes.

Method 2

Method 2 of 3:

Harvesting Buds

Download Article

1
Clip the fan leaves. The fan leaves are the large leaves with 5 distinct points—a large, long point in the center and two smaller points on either side. Pluck fan leaves with your fingers, scissors, or shears.^{[7]
X
Research source}
- Some people choose to clip their fan leaves later, after they’ve cured the plant. This slows down the drying process and produces more flavorful buds.
2
Trim the sugar leaves. The sugar leaves are those that emerge from the buds themselves. They are so short that their stems often cannot be seen. Use your scissors to carefully reach into the bud and snip them off at the stem. If you like, leave any sugar leaves that have a healthy amount of trichomes, which can contribute to the overall THC yield.^{[8]
X
Research source}
- Trimming all the sugar leaves often makes for a smoother and more potent crop.^{[9]
  X
  Research source}
3
Snip buds off the branches, leaving some stem attached to hang them. Once the excess leaves are gone, use your shears or a sharp knife to sever the bud stems near the branch. Generally, it’s a good idea to leave the buds on the stem. This slows the drying process and allows you to hang the buds to dry, as opposed to using specialized drying racks.^{[10]
X
Research source}
- If you’re in a high-humidity environment, remove the buds in order to advance the drying process.
- Cutting individual buds from the branches is called “bucking.”
4
Hang the branches to cure. When the bud-bearing branches have been removed and partitioned into individual pieces, it’s time to dry and cure them. Using string or twist ties, hang the branches on your laundry line in a well-ventilated area so that all parts are exposed to air. Hang your plants in a room with a temperature of about 60–70 °F (16–21 °C) for 1-3 months.^{[11]
X
Research source} Keep a fan or window open in the room to improve ventilation.
- Use a humidity meter to ensure the humidity level of the room never drops below 50%.
- Don't expose your harvested plants to direct sunlight, heat, or moisture. The latter is especially bad, as it can produce mold, which can ruin a crop.
- Your crop is done curing once the buds are springy when you touch them, and the stems snap easily rather than bend.
Once dry and ready, use your fingers to carefully pinch the buds away from the greater stems. Then, clip the rest of the leaves from all of the branches. Store these in airtight containers.^{[12]
X
Research source} Once a marijuana plant has been totally trimmed of its buds and leaves, place it in your compost bin or put it out with the rubbish.

Method 3

Method 3 of 3:

Encouraging a High Yield

Download Article

1
Remove dead fan leaves leading up to harvest time. As harvest time approaches, reach into the branches of the live plant and remove all of the dead and dying fan leaves (identifiable by their yellow hue) from the branches. This process allows the plant to focus as much energy as possible on growing healthy leaves, rather than wasting energy maintaining leaves that may die anyway. A gentle tug, sometimes firm, is all that's required to remove most dead leaves.^{[13]
X
Research source}
- Trimming away dying plant leaves also lets more sunlight through to the lower parts of the plant, helping you grow better marijuana.
As branches grow out from the main stalk of the plant, they in turn develop shoots and branches of their own. However, they will struggle to get enough light and sap energy from the leaves located at the ends of the main branches. Trim these leaves and shoots away at the base with heavier pruning shears for a clean cut.^{[14]
X
Research source}
3
“FIM” or top your plant. FIMing refers to the process of cutting the topmost vegetation (known as a "top") from your plant in order to double the number of buds it produces, and causing the plant to grow out instead of up. "Topping" means to remove the whole topmost shoot down to the base. Both techniques encourage greater bud growth, making the most of limited growing space.^{[15]
X
Research source}
- To FIM your marijuana plant, locate a new shoot, then use your shears or other trimming instrument to snip 2/3 of the shoot’s length.
- The term “FIM” comes from the phrase, “F***, I missed,” often said when a grower makes a mistake while topping, which is where the practice originated.
4
Super crop your plant to encourage stronger branch growth. Select a mature green branch. With both hands, gently bend the branch back and forth until you hear the branch crack and see a bit of white discoloration. Finally, rest the bent branch on top of or against a nearby branch to support its weight.
- Super cropping causes the plant to heal and rebuild a stronger branch, allowing for more efficient circulation of nutrients and water within the plant.
If you see small buds sprouting from the lower portion of your plant, pluck or clip them off. These small buds will only drain energy from the larger and more plentiful buds growing near the top of the plant.^{[16]
X
Research source}
After trimming your plant, it needs time to recover and heal. Your plant will often only need to be trimmed twice a month. Prune more often, every 3-4 days, during your plant’s early vegetative stage (when it first produces leaves) and toward the end of its flowering (bud-producing) stage.^{[17]
X
Research source}

Expert Q&A

Search

Add New Question

Question

If my tree was an outdoor tree, can I change it to indoor during the final aging process, and how will that affect my tree?

Lauren Kurtz
Professional Gardener
Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.

Lauren Kurtz

Professional Gardener

Expert Answer

You can try this, but it will decrease the health of your plant and potentially reduce the THC in your harvest. Keep the lighting schedule consistent and use a high power grow light. Trimming and drying is best done inside where humidity levels are more consistent.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 16
Question

Does the color of the bud change during the drying process?

Lauren Kurtz
Professional Gardener
Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.

Lauren Kurtz

Professional Gardener

Expert Answer

Yes, your bud will become a duller shade of green, but the color shouldn’t change drastically.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 11
Question

Can I trim the buds off the plant and keep the plant alive so it can rebud again?

wikiHow Staff Editor
Staff Answer
This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor

Staff Answer

Absolutely! A well-trimmed cannabis plant can continue to produce buds throughout the year.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 25

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Storing the dry, clipped buds in a mason jar or an airtight ziplock bag will preserve them longer than storing them in an open container.

Thanks
Helpful 2 Not Helpful 0

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

I recommend leaving the sugar leaves on until your plant is dry. Dry trimming almost always comes out with a much better product. The only advantage of wet trimming is that it is supposedly faster.
I would only use an air tight mason jar to cure, never a plastic or ziplock bag since those can contribute to mold.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!