How to Trim Rose Bushes in Fall

Co-authored by Clark Hill and Hannah Madden

Last Updated: May 26, 2024 References

Rose bushes are beautiful plants that usually produce flowers in the spring. As fall begins, rose bushes usually close up and stop blooming. To maintain the health of your plant, try to cut it down by about ⅓, make your cuts at a 45 degree angle, and cut off any dead or diseased branches that can cause trouble for your plant as the weather gets colder.

Part 1

Part 1 of 3:

Timing Fall Pruning

Download Article

1
Stop deadheading 8 to 10 weeks before the first frost. Deadheading is the process of removing all of the flowerheads from your rose bush. This is beneficial during the warm weather to promote new growth, but it can damage the plant as the cold weather sets in.^{[1]
X
Research source
Clark Hill. Plant Specialist & VP of Operations, Platt Hill Nursery.} Stop deadheading your rose bush about 2 months before the cold sets in.^{[2]
X
Research source}
- Leaving the flowerheads on the bush protects the ends of the branches from freezing.
2
Avoid fertilizing and transplanting as the cold weather sets in. Fertilizing and transplanting your rose bush can promote new growth. This new growth can get damaged in the cold weather and can harm your plant. Try to stop fertilizing and transplanting your rose bush in the late summer.^{[3]
X
Research source}
- Rose bushes usually do not grow in the cold weather anyway. Plan on fertilizing, transplanting, and promoting new growth on your rose bush in the spring and summer.
Advertisement
3
Wait until the first frost is over to prune. Pruning your rose bushes can promote new growth. If you trim them before the first frost, it could create new buds that will be killed when the first frost comes along. This can damage the plant and make it produce less flowers in the spring. Wait until your area has had at least 1 frost before you trim your roses.^{[4]
X
Research source}
- The first frost comes at a different time for every climate. For most temperate areas, it comes around late fall in November or December. If you live in a warmer or colder climate, it could come much sooner or much later.
4
Wipe a pair of sharp pruners with alcohol to sterilize the blades. It is important to use the correct tools when you prune your rose bushes. Get sharp pruners and dip them in isopropyl alcohol to disinfect them before you use them.^{[5]
X
Research source}
- If your rose bush is big or thick, you can use sharp loppers with long handles to reach into the middle of the bush. Loppers give you less control, so use caution as you make your cuts.
Warning: If your rose bush has any mildew or fungus, which normally looks like white spots on the branches of the bush, you should sterilize your pruners in between each cut. If it doesn’t, you can use your pruners on multiple bushes without sterilizing them.

Part 2

Part 2 of 3:

Removing Branches and Canes

Download Article

1
Make each cut at a 45 degree angle above the buds. The buds on your rose bush create new growth. In the fall, they will probably look like small green dots on the branches of your bush. Make your cuts about ¹⁄₄ in (0.64 cm) above the bud at a 45 degree angle to keep the bud for the spring and lessen the damage to the branch.^{[6]
X
Research source
Clark Hill. Plant Specialist & VP of Operations, Platt Hill Nursery.}^{[7]
X
Research source}
- Cutting at a 45 degree angle allows water to run off of the branch and not collect on top of the cut.
2
Cut off about ⅓ of each branch. Roses are super hearty bushes and they love to be cut down. In the fall, take off about ⅓ of each branch that you cut so your rose bush can grow healthy and tall in the spring.^{[8]
X
Research source}
- You can cut your rose bush down even more if you’d like to change its shape or height. Make sure to leave at least 6 inches (15 cm) of branches above the ground so that your rose bush can grow back.
3
Cut away any heavy top pieces so the bush doesn’t bend when it freezes. Fall is usually a rain-heavy time for most areas. If your rose bush is very top heavy, it could bend and break as the rain collects and freezes on it. If you notice large clumps of branches near the top of your bush, cut those down to size until they are relatively the same height as the rest of the bush.^{[9]
X
Trustworthy Source

Royal Horticultural Society
Leading gardening charity in the U.K. providing resources for identifying, growing and caring for flowers and other plants

Go to source}
- This will also make your rose bush look more uniform.
4
Separate any branches that could rub together. Fall is a wet and windy time, and branches that are too close to each other can create friction and damage your plant. If you notice 2 branches that are crossed over each other, trim at least 1 back so that they aren’t near each other anymore.^{[10]
X
Trustworthy Source

Royal Horticultural Society
Leading gardening charity in the U.K. providing resources for identifying, growing and caring for flowers and other plants

Go to source}
- This can also improve the overall appearance of your rose bush and make it look more full when it starts to flower.
5
Remove any dead or diseased branches. Branches that are small and skinny or leaves with yellow splotches may indicate a fungal infection in your roses.^{[11]
X
Research source
Clark Hill. Plant Specialist & VP of Operations, Platt Hill Nursery.} Cut off the branches about ¹⁄₂ in (1.3 cm) below the diseased area to stop the spread of infection.^{[12]
X
Research source}
- An infection on your rose bush doesn’t mean an imminent death. If you cut off the affected branches in the fall, it is much less likely that the infection will spread come springtime.
Warning: Always disinfect your pruning tools after you cut a diseased branch to stop the spread of infection. Spray lysol on your tool or dip it in isopropyl alcohol as soon as you can.^{[13]
X
Research source}

Part 3

Part 3 of 3:

Trimming Foliage and Mulching

Download Article

1
Tear off any suckers at the base of the bush. Suckers are small offshoots of your rose bush that take away energy and food from the main plant. Dig down as far as you can toward the base of the sucker and tear it out of the ground with your hands.^{[14]
X
Research source}
- You can also use your pruners to cut the suckers back if they are too thick to tear.
2
Clip off any diseased leaves with your pruners. Never tear or rip the leaves off of the branches of your rose bush, since this could leave openings for diseases.^{[15]
X
Research source
Clark Hill. Plant Specialist & VP of Operations, Platt Hill Nursery.} Look for leaves with black, yellow, or white spots and carefully snip them off at the base.^{[16]
X
Research source}
- Removing the infected leaves before your bush goes into dormancy for the winter increases its chances for survival.
- If your rose bush has a fungal infection that won’t go away, remove all of the leaves completely and then spray the bush with lime sulfur. This will sanitize the bush and kill the fungus.^{[17]
  X
  Research source}
If your rose bush had any fungal infections, leaving the infected branches and leaves on the ground can spread the fungus further. Use a rake to pick up all of the debris from around your bush and dispose of it.^{[18]
X
Research source}

Warning: If you noticed any fungal infections on your rose bush, do not put the debris into the compost. This could spread the infection. Instead, put your yard debris into the garbage where it will not be spread to other foliage.^{[19]
X
Research source}
4
Add a 2 to 3 in (51 to 76 mm) layer of mulch around the base of the bush. Mulch helps to protect the roots of your rose bush from the extremely cold weather that is about to come. Pile a thin layer of either mulch or compost to insulate the roots and keep your rose bush healthy.^{[20]
X
Research source}
- You can purchase mulch or compost at your local garden supply store, or you can make your own compost at home.