How to Wash a Motorcycle

Reviewed by Jason Shackelford

Last Updated: February 29, 2024 Approved

Washing your motorcycle isn’t just about keeping your sweet ride looking great. If you don’t wash your bike regularly and correctly, you’ll risk damaging its looks and its parts. Giving your dirty motorcycle a bath, however, doesn’t require more than some basic supplies like water, a sponge, and detergent. Polish up details like the wheels and any chrome before you finish, and your bike will soon be turning heads again.

Part 1

Part 1 of 3:

Pre-Cleaning Your Motorcycle

Download Article

Spraying water all over a hot engine is a recipe for disaster: the sudden change in temperature can crack the engine block. Even if you’ve just gone down a wet country road and your motorcycle’s caked in mud, let it cool down before you begin.^{[1]
X
Research source}
2
Get your cleaning gear together. While you’re waiting for your motorcycle to cool down, why not grab the supplies you’ll need to clean it? All of the supplies you’ll need can be found at your local auto or motorcycle shop. Make sure to gather:^{[2]
X
Research source}
- A bucket
- A clean sponge or two
- Several clean, dry cloths (chamois or microfiber)
- Degreaser and/or WD-40
- An old toothbrush (to help clean tight places)
- Auto/motorcycle wax (optional)
- Bug and tar remover (if needed)
- Chrome cleaner (if needed)
Advertisement
3
Start by cleaning the chain. If your motorcycle has a chain, getting the dirt and grease off of it first is a smart move. This keeps the grime from splashing all over the rest of your bike while you’re trying to clean it. Use an approved chain degreaser if you can find one at your local shop. Spray it on the chain to loosen debris, then wipe it away with a clean cloth.^{[3]
X
Research source}
- WD-40 will also work as a solvent to loosen grease and dirt.
- Make sure to apply lubricant to your chain again once you are done cleaning your motorcycle.
4
Clean the non-chrome engine parts with water and solvent. Before starting on the body, take care of any other nooks and crannies around the engine area that need special attention. Dip an old toothbrush in clean, cool water and gently scrub dirt and debris away. Spray WD-40 on the gunk if you need extra help removing it.^{[4]
X
Research source}
- Generally, however, keep away from the brake lines and bearings. Getting water into these areas can cause corrosion and other problems.

Part 2

Part 2 of 3:

Washing the Body

Download Article

This will help loosen any dirt and rinse as much of it away as possible, making the cleaning process easier. Just make sure to use a gentle stream of water from a hose. High-pressure sprays can damage the finish, paint or other materials, and should be avoided.^{[5]
X
Research source}
2
Rub the whole body with a soft sponge or cloth. A little elbow grease at this point will help remove additional grime. Dip a sponge or soft cloth in a bucket of cool water, and wipe it all over the body of your motorcycle.^{[6]
X
Research source}
- If you are cleaning your bike to remove salt from it (such as after riding on a winter road), just use water in this way, then skip to waxing it. Using detergents or other cleaners might make the salt problem worse.
If your motorcycle has plastic parts on the body, it’s just fine to use an approved auto detergent. Add some to a bucket of cool water, and wipe the parts with a sponge dipped in the suds.^{[7]
X
Research source}
After you’ve cleared off all the muck and grime from your bike, grab your hose again. Use a gentle spray to wash away the last of the dirt and any traces of suds. If there’s not much to clear off, you can also dip a clean sponge into clear, cool water, and use this to rinse the bike.^{[8]
X
Research source}
5
Wipe off excess water and let your bike dry. Take a dry chamois or microfiber cloth and gently rub down your motorcycle. This will wick away the water left on it, so that there won’t be any water spots left as your bike air-dries.^{[9]
X
Research source}
- Don’t let your motorcycle dry in direct sunlight, since this can also cause water spots.
6
Buff your seat with an approved protectant. Motorcycle seats can be made from a variety of materials. Vinyl and leather are the most common. Vinyl seats are quite tough, but can fade and crack over time. Use an approved vinyl protectant to halt these problems. Leather seats are more delicate, but using a leather care cream will protect yours.
- Protectants for vinyl and leather can be found at any auto or motorcycle supply store.
- Do not use detergents on leather.

Part 3

Part 3 of 3:

Detailing Your Ride

Download Article

Any biker knows that a nice ride can leave your motorcycle looking like you waged war against a swarm of flies. If your motorcycle is caked in bug goo, soak it liberally with bug and tar remover. After the grime is loosened, use a soft sponge or cloth to wipe it away, and another damp one to remove any leftover residue.^{[10]
X
Research source}
2
Clean aluminium wheels with soapy water. Many modern bikes have lightweight aluminum wheels. If you want to clean yours, use only soapy water and a soft cloth. Rinse with water and wipe with a dry cloth.^{[11]
X
Research source}
- Abrasive cleaners or tools can damage the finish or paint on wheels, so avoid these.
- If you have traditional chrome wheels, use chrome cleaner instead.
A quality wax can protect the finish of your bike and keep dirt and grime away. Apply this after the rest of your bike is thoroughly cleaned. Follow the directions on your commercial wax spray or rub. Each product will have slightly different instructions.^{[12]
X
Research source}
The bearings are one of a motorcycle's most important but delicate parts. A dedicated protective spray will help coat the bearings and keep moisture and dirt at bay. See your chosen product’s package for the exact application instructions.^{[13]
X
Research source}

Community Q&A

Search

Add New Question

Question

How do I use polishes to clean a motorcycle?

Community Answer

A good quality auto or motorcycle wax will do a great job cleaning your bike. Chrome polish can be used on chrome parts, if your motorcycle has any.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 13
Question

Can water be added to every part of the motorcycle, including the engine?

Community Answer

Yes, water does not effect the engine, but be sure not to force water down the exhaust pipe, as this is a direct link to the interior portion of the engine.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 15 Helpful 25
Question

Is there a problem with replacing a 100cc bike engine with a 120cc engine?

CrayFish715

Community Answer

Just make sure your other systems (like your chain, sprockets, tires, brakes, etc.) can take the extra power. It shouldn't be too much of a problem with a small jump in power.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 3

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Use only approved auto or motorcycle products for cleaning your bike. Detergents and solvents not intended for cleaning vehicles may harm your motorcycle’s finish, paint, or parts.

Thanks
Helpful 3 Not Helpful 2
Test your motorcycle’s brakes and lubricate the drive chain before riding to ensure that it is safe for use.^{[14]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
Don’t put any protectant sprays on the hand or foot controls, the seat or the tire treads. Cleaning products can make these surfaces slippery, and your motorcycle may then become dangerous to operate.^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0